Compressor Pro Line Extensive A29BT-1.5-150CM, 150 l, 230 V Extensive, motor power 1.5 kW, air intake 255 l/min, pressure 10 bar, air receiver 150 l, voltage 230/50 V/Hz, 93 dB Lwa / 73 dB at 4 m
Code: A29BT-1-5-150CM
Related products
Product detailed description
Extensive · 150 l · 230 V · 255 l/minThe biggest reserve for an ordinary socket with the smaller motor. The A29BT-1.5-150CM pairs the A29B pump with a 1.5 kW motor on 230 V and a 150 l tank: 255 l/min of displacement at 1,075 rpm, 10 bar, 80 kg. For a workshop without a three-phase supply, where a gun or a stapler draws air in longer bursts and the pump has time in between to catch up with the tank.
Why a smaller motor and a big tank for an ordinary socket
The single-phase 1.5 kW motor loads an ordinary 230 V circuit less than the 2.2 kW motor does, and the 150 l tank makes up for what the pump lacks in displacement: the tool draws on the reserve and 255 l/min tops it up between bursts. The machine is 1,362 mm long and weighs 80 kg, so it belongs in one place; one front castor with a brake and the open handle are enough to shift it around the workshop. If you have a 400 V socket, take the same tank with 2.2 kW. The noise stays at 93 dB Lwa, or 73 dB at 4 m from the machine.
Equipment and details
What the A29BT-1.5-150CM has from the factory
- single-stage twin-cylinder oil-lubricated A29B pump with an oil sight glass, V-belt drive under a moulded belt guard, 1,075 rpm
- single-phase 1.5 kW (2 hp) electric motor, 230 V / 50 Hz, thermal overload protection; automatic stop/start pressure switch
- air intake 255 l/min, 10 bar, aftercooler on the pump outlet
- horizontal 150 l tank with a ball valve for draining condensate
- pressure regulator, two gauges (tank and outlet) and a DN 7.2 quick coupling
- one front swivel castor with a brake, two 200 mm rear wheels, open tubular handle
- noise 93 dB Lwa, 73 dB at 4 m
- AirTube QR code on the tank opens service videos; 2-year warranty, 10 years on the tank against rusting through
Machine details
Where next if the A29BT-1.5-150CM is not the right fit
The same tank with a 2.2 kW motor for a 230 V socket is the A29BT-2.2-150CM, on 400 V the A29BT-2.2-150CT. The siblings with 1.5 and 2.2 kW are compared on the A29B range page; other machines for an ordinary socket are grouped together under 230 V compressors. For a spray gun, fit a regulator with a filter at the workstation.
Values apply to a 50 Hz supply. Air intake is the amount of air the pump draws in. Noise is given as the sound power level Lwa and the sound pressure at 4 m from the machine. A piston compressor works in cycles (topping up the tank and pausing), not continuously.
Ventilek advises
A hundred and fifty litres for an ordinary socket: a smaller motor, a big reserve — for a workshop with no 400 V where the gun sprays for a long time.
Additional parameters
| Category: | Air compressors |
|---|---|
| Warranty: | 2 years |
| Compressor type: | Piston compressor |
| Pressure: | 10 bars |
| Suction power: | 255 l/min |
| Air delivery: | 165 l/min |
| Pressure vessel volume: | 150 L |
| Design of pressure vessel: | Lying down |
| Motor power: | 1.5 kW |
| Mains voltage: | 230/50 V/Hz |
| Speeds: | 1075 rpm |
| Number of cylinders: | 2 |
| Number of grades: | 1 – single-stage compressor |
| Lubrication: | Oleic |
| Noise: | 93 dB - Lwa, 73 dB - Lwp(4m) |
| Weight: | 80 kg |
| Accessories: | Pressure regulator, Wheels, Handle, Quick coupler |
| Engine: | Electric |
| Soundproofed: | No |
| Drive: | V-belts |
| Air dryer: | No |
| Retrieved from: | Professional |
| Development: | Mobile |
| Dimensions: | 1362 x 500 x 971 mm |
ABAC PRO - A29B Piston Compressor
Belt replacement
Commissioning
Compressor installation
Compressor Service KIT and Replacement
Condensate discharge
Maintenance of the suction filter
Oil change at the compressor
Product rating
Be the first who will post an article to this item!
Discussion
Be the first who will post an article to this item!
The company ABAC has been one of the most important manufacturers of piston compressors on the world market since its establishment in 1980 . Currently, the brand ABAC is owned by ATLAS COPCO, the largest compressor manufacturer in the world and is part of the multinational group PAD (Professional Air Division). The goal of the ABAC brand is to become a world leader in the development, production and sale of piston compressors.
Production at company ABAC
ABAC compressors are manufactured in 5 production centers around the world, with an annual production of almost 2 million compressors. The brand's parent plant ABAC in Turin, Italy employs around 250 employees and is primarily focused on the design and production of professional V-belt compressors with a daily production capacity of over 600 machines. The ABAC plant also has extensive warehouse facilities with several thousand compressors available for immediate delivery.
Innovative concept
ABAC does not only mean compressor production. We are directly involved in the development of key innovations and advanced solutions and set trends in the compressor market. The efforts of our designers have resulted in, for example, an aerodynamic pulley housing for temperature reduction of up to 35°C, the revolutionary XPAND hose reel compressor or the PRO LINE ZERO oil-free compressors with V-belts. In the ABAC program you will always find the most modern and unique solution for compressed air production on the market.
A modern solution
We are a modern company that is aware of the current trends around us. We are bringing advanced technologies to the compressor industry, such as the use of QR codes and the AIR TUBE app to make it easier for the user of our compressor to access the information they need. We use social media, chat and multimedia instead of traditional marketing and documentation formats. With compressors ABAC you will always have convenient access to all the necessary information.
Compressor program
In the supplier program of the ABAC brand you will find 100%. The basic range includes 100% from small portable compressors for home applications to larger stationary compressors for permanent deployment.
