Šroubové kompresory Atmos Albert

ATMOS — Czech manufacturer of screw compressors since 1899

ATMOS Chrást near Pilsen is a traditional Czech manufacturer of screw compressors with more than 120 years of experience. In-house production of screw blocks, top quality and a unique service approach with a 7-year UNLIMITED warranty — unique in the Czech Republic.

For industrial, trade and specialised applications, ATMOS offers three product lines of screw compressors covering the power range from 4 to 110 kW.

7-year UNLIMITED warranty — unique in the Czech Republic

"We simply trust our machines! The best way to express confidence in the quality of our machines is to provide a SEVEN-YEAR UNLIMITED WARRANTY."

No flat-rate payments
No service contracts
7 years without worries
7 years of operating certainty
Online management via the ATMOS Plus app

Three product lines — choose according to your power range

ALBERT — 4 – 22 kW

The most efficient in its class. Slow-running screw blocks for craft workshops and small to medium-sized industrial companies. 60+ models, Standard / Komfort / Vario / Vertikál variants.

59 products + 8 accessories
Blok B100 / B150 — 1455 min⁻¹
Air tank 270 / 500 / 900 l
Integrated FRIULAIR dryer

View the ALBERT line →

SEC — 15 – 37 kW

Simply reliable. Stationary compressors with design reserves in the key components. Exceptionally low noise thanks to the sound-insulated steel enclosure.

10 models in the 15-37 kW power range
LOGIK 26-S + ATMOS Care
Vario variants with a Danfoss frequency converter
Multi V belt drive

View the SEC line →

SMARTRONIC — 30 – 110 kW

The flagship of ATMOS. Oil-lubricated, air-cooled screw compressors with a power reserve in all important components.

21 models in the 30-110 kW power range
Integrated Fusion dryer
Remote management via ATMOS Plus
Heat recovery exchangers (waste heat)

View the SMARTRONIC line →

Key advantages of ATMOS screw compressors

7-year UNLIMITED warranty — unique in the Czech Republic

ATMOS is the only Czech manufacturer to provide a SEVEN-YEAR UNLIMITED warranty on the Albert line regardless of operating hours. No flat-rate payments, no service contracts.

Slow-running screw block B100 / B150

The B100 / B150 screw block, rotating at 1455 min⁻¹ (models up to 7,5 kW), is 2-3× slower than the competition. A design proven over years and manufactured in the Czech Republic — fewer revolutions = less wear = longer service life.

ATMOS Care monitoring + LOGIK 26-S

A microprocessor control unit with automatic diagnostics of service intervals. Online management via the ATMOS Plus app, remote machine monitoring, alerts.

Czech manufacturer from Chrást near Pilsen

Traditional ATMOS production since 1899. In-house production of screw blocks, inspection of every machine, service and spare parts directly in the Czech Republic — without long waiting for spare parts from abroad.

What applications are ATMOS compressors intended for

Large craft workshops
Small and medium-sized industrial companies
Mechanical engineering and metalworking
Body shops and car repair shops
Construction and maintenance
Joinery and woodworking
Plastics industry
Paint shops and surface finishing
Air tools
Agriculture and the food industry

Frequently asked questions

What does the Standard vs Komfort version mean?: Standard = open version without an enclosure. Komfort = machine in a sound-insulating steel enclosure that opens towards the front. The Komfort version achieves significantly lower noise levels and is more suitable for workshops and for locations close to workplaces.
What is the difference between the standard and the Vario version?: The Vario version is equipped with a Danfoss frequency converter that continuously regulates the speed of the screw block and thus the output of the machine according to the current consumption. The main advantage: significant electricity savings by eliminating idle running.
What do the letters K, V, S in the model code mean (e.g. E.50 KVS)?: K = Komfort (steel enclosure), V = air tank (270 l as standard), S = integrated refrigeration dryer for compressed air. Example: E.50 KVS = E.50 in the Komfort version with an air tank and a dryer.
What is ATMOS Care and why do I need it?: ATMOS Care is an add-on electronic unit that monitors the condition of the filter elements and indicates the need for service. If no replacement takes place, the unit modifies the output of the machine so that it can safely keep working — thus protecting it against damage caused by clogged filters.
What is anti-condensation management (ATM) and when should you choose it?: ATM is a system that keeps the compressor permanently warm and separates water vapour from the inside of the machine. It is suitable where the machine runs with short operating times and long downtimes — without ATM there would be a risk of condensate formation and internal corrosion.

Screw Compressor ATMOS ST 110 Vario input power 110 kW, capacity 19.1 m³/min, 7.5 bar, Vario Danfoss, LOGIK 26-S, 7-year warranty

Code: ST110VARIO

€0,04

(€0,03 excl. VAT)

Screw Compressor ATMOS ST 110 input 110 kW, capacity 19.1 m³/min, 7.5 bar, LOGIK 26-S, 7-year warranty

Code: ST110

€0,04

(€0,03 excl. VAT)

ATMOS ST 90 Vario screw compressor input power 90 kW, capacity 16.8 m³/min, 7.5 bar, Vario Danfoss, LOGIK 26-S, 7-year warranty

Code: ST90VARIO

€0,04

(€0,03 excl. VAT)

ATMOS ST 90 Screw Compressor input power 90 kW, capacity 16.8 m³/min, 7.5 bar, LOGIK 26-S, 7-year warranty

Code: ST90

€0,04

(€0,03 excl. VAT)

Screw Compressor ATMOS ST 75 Vario+ input 75 kW, output 13.4 m³/min, 7.5 bar, Vario Danfoss, Plus (higher discharge), LOGIK 26-S, 7-year warranty

Code: ST75VARIOPLUS

€0,04

(€0,03 excl. VAT)

Screw Compressor ATMOS ST 75 Vario FD input 75 kW, capacity 12.7 m³/min, 7.5 bar, Vario Danfoss, FD integrated dryer, LOGIK 26-S, 7-year warranty

Code: ST75VARIOFD

€0,04

(€0,03 excl. VAT)

ATMOS ST 75 Vario Screw Compressor input 75 kW, capacity 12.7 m³/min, 7.5 bar, Vario Danfoss, LOGIK 26-S, 7-year warranty

Code: ST75VARIO

€0,04

(€0,03 excl. VAT)

Screw Compressor ATMOS ST 75 FD input power 75 kW, capacity 12.7 m³/min, 7.5 bar, FD integrated dryer, LOGIK 26-S, 7-year warranty

Code: ST75FD

€0,04

(€0,03 excl. VAT)

Screw Compressor ATMOS ST 75 input 75 kW, capacity 12.7 m³/min, 7.5 bar, LOGIK 26-S, 7-year warranty

Code: ST75

€0,04

(€0,03 excl. VAT)

Screw Compressor ATMOS ST 55 Vario+ FD input power 55 kW, capacity 8.9 m³/min, 7.5 bar, Vario Danfoss, FD integrated dryer, Plus (higher discharge), LOGIK 26-S, 7-year warranty

Code: ST55VARIOPLUSFD

€0,04

(€0,03 excl. VAT)

41 items total

Šroubové kompresory Atmos Albert

ATMOS — Czech manufacturer of screw compressors since 1899

7-year UNLIMITED warranty — unique in the Czech Republic

Three product lines — choose according to your power range

ALBERT — 4 – 22 kW

SEC — 15 – 37 kW

SMARTRONIC — 30 – 110 kW

Key advantages of ATMOS screw compressors

7-year UNLIMITED warranty — unique in the Czech Republic

Slow-running screw block B100 / B150

ATMOS Care monitoring + LOGIK 26-S

Czech manufacturer from Chrást near Pilsen

What applications are ATMOS compressors intended for

Frequently asked questions

Bestsellers

Product sorting

List of products

Listing controls

News Overload

We select articles from our advice room