ATMOS ST 55 Vario+ Screw Compressor input 55 kW, capacity 8.9 m³/min, 7.5 bar, Vario Danfoss, Plus (higher discharge), LOGIK 26-S, 7-year warranty
Code: ST55VARIOPLUSProduct detailed description

ATMOS ST 55 Vario+ Screw Compressor
The ATMOS SmartTronic ST 55 Vario+ is a premium 55 kW Vario compressor with a Danfoss VLT inverter. Discharge rate of 8.9 m³/min at 7.5 bar (up to 7.6 m³/min at 13 bar). Plus version = higher discharge rate than the standard ST 55.
The Danfoss VLT inverter ensures smooth speed regulation of the screw block according to current consumption. Typical savings of 20–30% of electrical energy in operations with intermittent or variable consumption. Modulating valve for even higher efficiency. Weight 1230 kg.
ST 55 Vario+ Configuration
Specifically, this variant consists of:

✓ Screw block A 150
A150 5th generation — N-profile rotors (City University)

✓ Danfoss VLT inverter
Continuous regulation — saving 20–30% energy

— External dryer
Dryer as an external unit (optional)

✓ Plus configuration (+)
Higher air delivery with the same motor (+10–15%)
Main features
Block A 150
A150 5th generation with N-profile rotors — highest efficiency on the market (City University).
IE3 Motor 55 kW
High-efficiency IE3 motor with 2-pole construction, multi-V belt drive. 94% efficiency.
71 dB(A) Noise Level
Noise-reducing housing with laminar cooling air flow. Suitable for operations with human attendance.
Danfoss VLT drive
Variable speed control — 20–30% energy savings. + modulating valve.
Optional Fusion Dryer
Same machine in FD version = integrated fusion dryer.
7-year UNLIMITED warranty
Standard. Optional ATMOS Plus = extension up to 48 months with professional care.
ST 55 Vario+ Construction and Screw Block
Screw compressor block A150 + 55 kW IE3 motor + Danfoss VLT inverter. Multi-V belt drive. High-efficiency 3-stage oil circuit with MANN+HUMMEL filters. Integrated cooling with laminar airflow for low noise.

Danfoss VLT Drive + Modulating Valve

Danfoss VLT industrial frequency drive precisely adapted for oil-injected screw compressors. Variable speed control according to current consumption. Slow start-up protects the block and motor from hydraulic shock. Elimination of starting currents.
Modulating valve allows for continuous power regulation of the compressor based on the current compressed air consumption at the outlet. This leads to electricity savings and reduced machine load. The modulating valve is a simple and effective solution for saving energy, reducing mechanical and electrical stress, and extending lifespan. Together with the VLT drive, achievable savings of 20–30% electricity.

Technical data ST 55 Vario+
BASIC DATA | |
|---|---|
| Nominal motor power | 55 kW (IE3, 94% efficiency) |
| Operating pressure (variants) | 7.5 / 8.5 / 10 / 13 bar |
| Discharge (FAD at 7.5 / 8.5 / 10 / 13 bar) | 8.9 / 8.7 / 8.1 / 7.6 m³/min |
| Rated voltage | 400 V / 50 Hz |
| Motor protection class | IP 55 / ISO F |
| Noise level | 71 dB(A) |
| Compressed air outlet | G 1 1/4" |
| The temperature of the working environment | +5 ÷ +40 °C |
| Weight | 1230 kg |
| Dimensions (L × W × H) | 1876×1288×1761 mm |
EXECUTION | |
| Screw block | A 150 V. generation (N-profile rotors, City University) |
| Drive | Multi-V belt (with gearbox) |
| Inverter | Danfoss VLT — smooth regulation |
| Fusion dryer | Optional as FD version, or external |
| Control unit | LOGIK 26-S (MODBUS/RTU, ATMOS Care) |
| Guarantee | 7-year UNLIMITED + optional ATMOS Plus 48 months |
| Manufacturer | ATMOS Chrást, CZ (tradition since 1899) |
Who is ST 55 Vario+ suitable for

ST 55 Vario+ is purchased by large production facilities with irregular consumption. Typical customer: Forges with pneumatic hammers in cycles, large-capacity plastic injection molding machines, automotive stamping plants, paint shops with multiple rotating cabins.
Typical applications
- Large automotive stamping plants (bonnet, injection molding)
- Large-capacity plastic injection molding lines
- Foundries with pneumatic hammers in cycles
- Central pressure stations of industrial parks
- Printers with sheet-fed machines and helio-gravure
- Paint shops with multiple cabins and central distribution

7-year UNLIMITED warranty ATMOS PLUS 48 months
We simply believe in our machines.
- No flat fees, no service contracts
- ATMOS Plus extends the warranty up to 4 years beyond the standard
- Original parts and timely professional service
- Remote management via ATMOS Plus application
Optional Equipment — Heat recovery up to 72%
Using ATMOS heat recovery exchangers, it is possible to reuse up to 72% of the electrical energy consumed during compressed air production. The energy is recovered in the form of heat from the oil circuit. Investment return typically under 1 year.
ATMOS heat recovery exchangers are supplied as a compact external unit for connection to the compressor's oil circuit and the water circuit (heating, domestic hot water heating).
ST 55 Vario+ Construction Details






LOGIK 26-S + ATMOS Care Control

LOGIK 26-S controls the compressor operation and monitors all main functions. Monitors operating hours, time under load, % load, number of starts/hour. The controller menu includes a fault log, maintenance log, and the ATMOS Care function — electronic protection against a clogged separator. Remote communication via MODBUS/RTU. Up to 3 daily schedules for each day of the week. Master-Slave mode for 2 compressors.
Accessories — option: ARCHON Supervisory System

For compressor stations with 3, 5, or 9 compressors, we offer the ARCHON supervisory control system based on SIEMENS Simatic S7-1200. Up to 10 weekly schedules, 3 control methods (priority / operating hours / highest efficiency), 3 independent pressure schedules. Communication via Profinet or Modbus.
Related models and alternatives
If the SmartTronic ST 55 Vario+ doesn't precisely match your operation, consider these alternatives:
Frequently asked questions
- What is the difference between ST 30, ST 30+, and ST 30 Vario+?
- ST 30+ is a higher performance version (higher output with the same 30 kW motor).
- ST 30 Vario+ adds a Danfoss VLT inverter — smooth performance regulation, 20–30% energy savings for variable consumption. ST 30 (without +) is not in the current price list.
- What does FD mean in the ST xx + FD version?
- FD = Fusion Dryer integrated directly into the compressor housing.
- Adsorption dryer utilizing waste compression heat for regeneration. Achievable pressure dew point +5 °C to -20 °C (up to -40 °C with additional equipment). Energy savings compared to a standalone dryer.
- What is the difference between the A150 block and the SCA-14/SCA-20?
- The A150 is an ATMOS 5th generation block with an N-profile rotor, developed with London City University – it is used in ST 30-55 kW models. SCA-14-G-R and SCA-20-G-R are blocks for higher outputs of 75-110 kW (larger rotors, higher air delivery). All three blocks are oil-lubricated with high efficiency.
- Can I choose a different working pressure than 7.5 bar?
- Yes.
- The SmartTronic is available in 4 pressure variants: 7.5 / 8.5 / 10 / 13 bar (selected at production). At higher pressures, the air delivery decreases in m³/min. For higher pressures of 14-25 bar, please inquire – ATMOS also supplies special variants.
- How does remote management ATMOS Plus work?
- ATMOS Plus is a cloud application for remote monitoring of compressors. Using a communication unit, the compressor connects to the internet (Profinet / Modbus). You can monitor pressure, operating hours, temperatures, and service intervals. It is possible to remotely set pressures and alarms.
- Included free with SmartTronic.
- What is 72% heat recovery and how is it suitable for production?
- The compressor produces heat (94% of the input electrical energy) during air compression. The ATMOS heat recovery exchanger captures this heat from the oil circuit and transfers it to the water circuit (heating, hot water preparation). Up to 72% of the input electrical energy is usable again.
- Investment payback typically within 1 year.
- What is ARCHON and when is it suitable?
- ARCHON is a master control system based on Siemens Simatic S7-1200 for coordinating 3, 5, or 9 compressors as a single source. Up to 10 weekly schedules, 3 control methods (priorities / operating hours / highest efficiency). Profinet / Modbus communication. It is suitable for central compressor stations with multiple units.
Additional parameters
| Category: | SMARTRONIC |
|---|---|
| Warranty: | 7 let |
| Compressor type: | Screw compressor |
| Version: | Screw compressor |
| Pressure: | 13 bar |
| Air delivery: | 8 900 l/min |
| Pressure vessel volume: | It isn't |
| Connecting: | 1 1/4" |
| Motor power: | 55 kW |
| Mains voltage: | 400/50 V/Hz |
| Lubrication: | Oleic |
| Noise: | 71 dB(A) |
| Engine: | Electric |
| Soundproofed: | Yes |
| Drive: | Direct |
| Air dryer: | No |
| Retrieved from: | Professional |
| Development: | Stationary |
| Inverter: | Yes |
Jak vznikají české kompresory ATMOS: Pohled do výroby!
Product rating
Be the first who will post an article to this item!
ATMOS is a Czech family-owned compressor manufacturer, the company ATMOS Chrást s.r.o. from Chrást near Pilsen. It makes screw and piston compressors, its own screw blocks and generator sets, and besides stationary machines also mobile and locomotive compressors. It makes the blocks and air receivers itself, assembles and tests the machines in Chrást and exports them to more than 100 countries.
Engineering production in Chrást began in 1899, compressors have been made here for more than 70 years, and in 2024 the company celebrated its 125th anniversary. In the socialist era the works belonged to the state enterprise Škoda Plzeň; screw compressors arrived in the 1980s, at first under licence, and more than 25 new types have been added since. With us you will find the Perfect piston series for the workshop and the Albert, SEC and SmartTronic screw series for continuous operation.
Made in the Czech RepublicATMOS compressor series
Perfect — piston compressors
Cast-iron pump unit for the workshop. The cast-iron pump unit runs at low speed and copes with daily use. Since 2004 it has been working in tens of thousands of installations in the Czech Republic and abroad.
- 2.2 to 7.5 kW, 310 to 1,170 l/min
- horizontal or vertical receiver, 90 to 500 l
- two-stage machines for 12.5 and 14 bar
Albert — screw, 4 to 22 kW
From a small workshop to light production. The slow-running B100 or B150 screw block is coupled directly to the motor, with no belt.
- Komfort in a soundproof steel enclosure
- air receiver and dryer on the machine
- Vario with a frequency inverter
SEC — industrial, 22 to 37 kW
For continuous operation in production. A free-standing machine in a soundproofed steel enclosure, the air receiver is chosen separately.
- pressure 8, 10 or 13 bar
- IE3 motors and ATMOS screw blocks
- Vario with a frequency inverter
SmartTronic — 30 to 110 kW
A compressor station in one cabinet. The ATMOS flagship series for large industrial plants.
- free air delivery up to 19.1 m³/min
- pressure 7.5 to 13 bar
- FD version with a built-in fusion dryer
Service kits and oil
Everything for one service. Original kits for Perfect compressors for the 1st to 4th year, chosen by the machine’s pump unit.
- oil with extractor, filter elements, check valve parts
- for the 2nd and 4th year also valve plates and belt
- ATMOS VDL 100 oil for piston machines
Not sure whether you need a piston or a screw compressor? The selection calculator in the Compressors category will help you find the right output.
Choose a compressorATMOS series side by side
| Design, motor, pressure and equipment | ||||
|---|---|---|---|---|
| Series | Design | Motor | Pressure | Equipment |
| Perfect | piston, cast-iron pump unit | 2.2–7.5 kW | 10 · 12.5 · 14 bar | 90–500 l receiver, PFT version without receiver |
| Albert | screw, block directly on the motor | 4–22 kW | up to 13 bar | Komfort enclosure, receiver, dryer, Vario inverter |
| SEC | screw, free-standing | 22–37 kW | 8 · 10 · 13 bar | soundproofed enclosure, Vario inverter |
| SmartTronic | screw compressor station | 30–110 kW | 7.5–13 bar | FD fusion dryer, Vario inverter |
A piston compressor needs breaks; the air receiver gives it time to cool down. A screw compressor can run continuously.
How to choose an ATMOS compressor
1. Add up consumption
Add up the air consumption of the tools that will run at the same time and allow a reserve of about 30 %. Work with the machine’s free air delivery, not its intake capacity.
2. Piston or screw
For intermittent use in a workshop or garage, a Perfect piston compressor is enough. Where the compressor runs for most of the shift, choose an Albert, SEC or SmartTronic screw compressor.
3. Pressure and receiver
Most tools need 10 bar; the two-stage Perfect machines deliver 12.5 and 14 bar. A large receiver pays off when tools draw air in bursts: the machine then switches on less often.
4. Dry air and maintenance
For dry, clean air add a dryer and filters; on screw machines the dryer can be built into the compressor. Service a Perfect piston compressor once a year with an original service kit.
Frequently asked questions
- Who makes ATMOS compressors?
- The Czech family-owned company ATMOS Chrást s.r.o. at its plant in Chrást near Pilsen, where engineering production has been running since 1899. In the socialist era the plant belonged to the state enterprise Škoda Plzeň; from that time comes, for example, the 1982 PKD12 piston compressor under the ŠKODA brand. ATMOS makes its own screw blocks and air receivers, and assembles and tests the machines in Chrást.
- What does Vario in the name mean?
- A Vario machine has a frequency inverter that smoothly adjusts the speed of the screw block to the current air demand. The compressor does not run idle and, with variable demand, saves 20 to 30 % of electricity.
- What do the letters in the Albert series mean?
- K = Komfort in a soundproof steel enclosure, V = air receiver, S = built-in refrigeration dryer. For example, the E.50 KVS is an E.50 in the enclosure, with a receiver and a dryer.
- Which Perfect can I plug into a 230 V socket?
- The Perfect 2,2/90 EX and the Perfect 2,2/150 EX. The other Perfect compressors need a three-phase 400 V socket.
- Which oil goes into a Perfect compressor?
- ATMOS VDL 100 mineral compressor oil. Depending on the machine, the fill is 1 to 2 litres, and the oil comes with an extractor in every service kit.
- What is the FD fusion dryer in the SmartTronic series?
- A dryer built directly into the compressor that uses the machine’s waste heat for regeneration. You set the pressure dew point on the controller between +5 and −20 °C. The five largest models have no FD version.
The operating manual for Perfect compressors can be downloaded from the machine’s product page. ATMOS is a brand of ATMOS Chrást s.r.o.
| Manufacturing company : | ATMOS Chrást s.r.o. |
|---|---|
| Address : | Plzeňská 149, 330 03 Chrást, Czech Republic |
| E-mail : | info@atmos-chrast.cz |