Sterile filter SPFSF-175 – 14 bar, G 2 1/2", 28,000 l/min 0.01 micron sterile element · 14 bar
Code: SPFSF-175
Related products
Product detailed description
The SPFSF-175 stainless steel sterile filter has a 0.01 µm sterile element (solid particle class 1) for the end of the filtration. It has a G 2 1/2" connection, a flow of 28,000 l/min at 7 bar and a working pressure of up to 14 bar.
It is the sterile stage of the SPF filters: the housing is the same for all stages, only the element differs.
Specifications
| Parameter | Value |
|---|---|
| Connection | G 2 1/2" (pipe thread) |
| Flow at 7 bar | 28,000 l/min (1,680 Nm³/h) |
| Working pressure | 14 bar |
| Element temperature | −20 to +150 °C |
| Filtration rating | 0.01 µm |
| ISO 8573-1 class | 1-x-x |
| Element replacement | at least once every 12 months |
| Element | PFSF-175V |
| Element material | borosilicate microfibres |
| Element design | wrapped |
| Housing | stainless steel 1.4404, polished |
| Height A | 743 mm |
| Width across the connections B | 226 mm |
| Housing diameter C | 139.7 mm |
| Weight | 11.4 kg |
| Drain E | G 1/4" thread in the bottom |
Housing and dimensions
The housing is made of stainless steel 1.4404, or 1.4301 on request, with the outer surface polished to Ra 0.8 and EPDM seals (FKM or silicone on request). It withstands up to +150 °C; the actual limit depends on the element.
According to the manufacturer: height A 743 mm, width across the connections B 226 mm, housing diameter C 139.7 mm. Weight 11.4 kg.
Flow by pressure
The flow applies to a pressure of 7 bar and a temperature of +20 °C. At a different pressure, it is multiplied by the correction factor; at 14 bar it is 1.88:
| Pressure (bar) | 4 | 7 | 10 | 14 |
|---|---|---|---|---|
| Flow (l/min) | 17,640 | 28,000 | 38,640 | 52,640 |
Spare element
Where to place it
It goes at the end of the filtration, after the SPFM fine pre-filter and the SPFS microfilter. They trap the oil and most of the particles, so the sterile element works with clean air.
You will find other sizes and stages among the SPF filters.
Additional parameters
| Category: | SPF stainless steel filters up to 14 bar – mesh to sterile element |
|---|---|
| Version: | Sterile filter |
| Pressure: | 14 bar |
| Connecting: | 2 1/2" |
| Dimensions: | 743 × 226 × 139.7 mm |
| Filtration: | 0.01 µm |
| Filter insert: | PFSF-175V |
| Material: | Stainless steel |
| Number of inserts: | 1 |
| Working temperature: | -20 / +150°C |
| Flow: | 28,000 l/min |
| Quality class - solid impurities: | 1 |
Product rating
Be the first who will post an article to this item!
Alfa and Omega from SloveniaIn the Slovenian capital, Ljubljana, there is a company specialized in compressed air treatment, production of industrial filters and filter inserts, separators or special membrane dryers and other products. Omega Air was founded in 1988 as a family business and soon secured a place in the industry. Over the years, Omega Air's workforce has also grown with increasing production and today the company employs more than 250 people. |
 |
 |
Omega products are used everywhereA wide range of applications is typical for Omega Air products. Its products are used in heavy industry as well as by private entities. Slovenia's footprint is thus noticeable in industrial sectors such as electrical, gastronomy, pharmaceuticals, moto and also in the chemical-industrial sector. However, the company's main product is special filters, which are exported all over the world. |
No greenhorn in the industryOmega Air also boasts several proprietary innovations and patents that originate in the development department. The company has also been awarded several times for its innovative solutions at the International Engineering Fair itself, which is traditionally held in Hannover, Germany. The Omega Air product range is brought to you by our air compressors company below. |
What Omega Air produces:
|