Compressed air treatment: filtration, drying and pressure regulation, Page 21
-
Treatment units
-
Industrial filtration
-
Air dryers
-
Pressure regulators
-
Cyclone separators
-
Oil-water separators
-
Pressure boosters
Bestsellers
Product sorting
List of products
EWO piston pressure regulator with secondary venting for compressed air and neutral gases with inlet pressure up to 60 bar.connection G 3/8"control range 3–50 bar, inlet...
2 brackets and parts for wall mounting one AAF filter, sizes 25 and 30.
Spare element AAFA-25V for activated carbon filters AAFA-25 and AAFA-30. Recommended replacement within 6 months at the latest, earlier if the oil content is higher.
Spare element AAFA-35V for activated carbon filters AAFA-35 and AAFA-60. Recommended replacement within 6 months at the latest, earlier if the oil content is higher.
Spare element AAFP-35V for basic filters AAFP-35 and AAFP-60. Recommended replacement every 12 months or 4,000 operating hours.
Spare element AAFP-78V for basic filter AAFP-78. Recommended replacement every 12 months or 4,000 operating hours.
Spare element AAFR-78V for dust filter AAFR-78. Recommended replacement every 12 months or 4,000 operating hours.
Spare element HF-04 with a green end cap for the Hankison F04-B-HF microfilter. Replacement: 3,000 h / 12 months.
EWO piston pressure regulator with secondary venting for compressed air and neutral gases with inlet pressure up to 60 bar.connection G 1"control range 1–20 bar, inlet pressure...
Pressure regulator FUTURA R382-4F, size 2: G 3/8" thread, setting range 0.2–4 bar, flow 4,500 l/min, inlet pressure up to 16 bar, 50 mm pressure gauge included, for ATEX...
Activated carbon filter FUTURA FA34-F, size 4: G 3/4" thread, residual oil 0.005 mg/m³, flow 2,500 l/min, inlet pressure up to 16 bar, for ATEX environments.
Pressure regulator FUTURA R38-10F, size 1: G 3/8" thread, setting range 0.5–10 bar, flow 2,500 l/min, inlet pressure up to 16 bar, 50 mm pressure gauge included, for ATEX...
A replacement bowl for FUTURA lubricators and units. It serves as a replacement for a damaged lubricator bowl.
EWO piston pressure regulator with secondary venting for compressed air and neutral gases with inlet pressure up to 60 bar.connection G 1"control range 0.5–12 bar, inlet...
With a G 1" thread and a flow of 3,300 l/min at 7 bar, the AAFC-198 cyclone separator removes liquid water directly after the compressor. Working pressure up to 16 bar.
3/2 valve FUTURA MCL34-F230VAC, size 4: G 3/4" thread, flow 12,500 l/min, 230 V AC coil, inlet pressure up to 10 bar.
Air-operated 3/2 valve FUTURA PCL34-F, size 4: G 3/4" thread, flow 12,500 l/min, inlet pressure up to 16 bar, for ATEX environments.
An indicator of the pressure difference before and after the element for FUTURA pre-filters and microfilters in sizes 1 to 4. It is mounted on the filter cap. It shows that the...
DRPE proportional pressure regulator: you set the outlet pressure by a 4–20 mA electrical signal from the control system.control range 0–4 bar, inlet pressure max. 11.4...
Spare element HF-02 with a green end cap for the Hankison F02-B-HF microfilter. Replacement: 3,000 h / 12 months.
Spare element PF-04 with a white end cap for the Hankison F04-B-PF dust filter. Replacement: 6,000 h / 12 months.
Spare element HF-06 with a green end cap for the Hankison F06-B-HF microfilter. Replacement: 3,000 h / 12 months.
Spare element HF-07 with a green end cap for the Hankison F07-B-HF microfilter. Replacement: 3,000 h / 12 months.
EWO diaphragm pressure regulator with a brass body and secondary venting for compressed air and neutral gases.connection G 1 1/2"control range 0.5–10 bar, inlet pressure up to...
A replacement bowl for FUTURA lubricators and units. It serves as a replacement for a damaged lubricator bowl.
Pressure regulator FUTURA R382-10F, size 2: G 3/8" thread, setting range 0.5–10 bar, flow 4,500 l/min, inlet pressure up to 16 bar, 50 mm pressure gauge included, for ATEX...
Pressure regulator FUTURA R382-16F, size 2: G 3/8" thread, setting range 0.5–16 bar, flow 4,500 l/min, inlet pressure up to 16 bar, 50 mm pressure gauge included, for ATEX...
Pressure regulator FUTURA R382-2F, size 2: G 3/8" thread, setting range 0.1–2 bar, flow 4,500 l/min, inlet pressure up to 16 bar, 50 mm pressure gauge included, for ATEX...
Spare element AAFS-35V for microfilters AAFS-35 and AAFS-60. Recommended replacement every 12 months or 4,000 operating hours.
Spare element AAFP-120V for basic filter AAFP-120. Recommended replacement every 12 months or 4,000 operating hours.
Spare element CF-06 with a black end cap for the Hankison F06-B-CF activated carbon filter. Replacement: 1,000 h / 12 months.
A replacement plastic bowl for a size 2 COMBIBLOC unit with a built-in float drain that releases the condensate by itself as soon as it rises. It suits continuous operation,...
Pressure regulator FUTURA R12-8F, size 2: G 1/2" thread, setting range 0.5–8 bar, flow 5,200 l/min, inlet pressure up to 16 bar, 50 mm pressure gauge included, for ATEX...
Check valve FUTURA RCL382-F, size 2: G 3/8" thread, flow 4,500 l/min, side ports top G 1/4", bottom G 1/2", front and rear G 3/8", inlet pressure up to 16 bar, for ATEX...
Soft-start valve FUTURA BF12-F, size 2: G 1/2" thread, flow 4,500 l/min, inlet pressure up to 16 bar, for ATEX environments.
Soft-start valve FUTURA BF14-F, size 1: G 1/4" thread, flow 2,000 l/min, inlet pressure up to 16 bar, for ATEX environments.
Soft-start valve FUTURA BF382-F, size 2: G 3/8" thread, flow 4,500 l/min, inlet pressure up to 16 bar, for ATEX environments.
Soft-start unit FUTURA BFMCL12-230VAC, size 2: G 1/2" thread, flow 3,400 l/min, 230 V AC coil, inlet pressure up to 10 bar.
An adapter for connecting the AMR add-on drain to a bowl with a 14 mm mounting hole. It lets you retrofit the AMR drain even to a bowl that has no G 1/8" thread.