Filtration, regulation and treatment of compressed air, Page 22
-hankison-susicka-vzduch-kompresor-tllak-kondenzace-rosny-bod.jpg)
Product sorting
List of products
The BFP basic filter cartridge is used to remove mechanical impurities from compressed air. Acrylic fibre and cellulose liner with a filtration capacity of up to 3 μm. Working...
The BFA microfiltration insert is used to remove mechanical impurities and oil from compressed air. Borosilicate microfibre and activated carbon liner with filtration capacity...
Kit for wall mounting and connecting filters. The set consists of two angles that are attached to the edges of the filter and allow subsequent mounting on the wall. Connecting...
AAFM pre-filter in 3" design for removal of fine impurities up to 0.1 um from compressed air according to ISO 8573-1 class 2. Body with easily removable container and designed...
AAFS microfilter in 3" design to remove micro impurities up to 0.01 um from compressed air according to ISO 8573-1 class 1. Body with easily removable container and designed for...
The B-AIR breathable air filter with G1/2" connection thread is designed for a flawless supply of breathable atmosphere. The microfilter removes impurities down to 0.01 um....
Removes the coarsest mechanical dirt up to 15 um in size according to ISO 8573-1 class 7. Connection by internal pipe threads 1". The design allows flow rates up to 3400 l/min....
Replacement catalytic filters (hopcalite) for OMEGA AIR - AAFH2-78. Suitable for removing CO andCO2 to the level of breathable air from compressed air according to ISO 8573-1...
Replacement filter element CHPC-018V for cyclone separator CHP. It enables inexpensive and efficient removal of water and impurities from compressed air. Working pressure up to...
Condensation dryer for compressed air to +3°C dew point. Maximum input pressure is 14 bar with a flow rate of up to 235 m³/h (3,916 l/min) and connection via external thread G1...
The FDRY-2000 Adsorption Dryer is designed for continuous separation of water vapour from compressed air with a flow rate of up to 26,000 l/min at a maximum pressure of 16 bar...
Removes the coarsest mechanical dirt up to 15 um in size according to ISO 8573-1 class 7. Connection by internal pipe threads 1/2". Designed to allow flow rates up to 1187...
AAFM pre-filter in 1/4" design for removal of fine impurities up to 0.1 um from compressed air according to ISO 8573-1 class 2. Body with easily removable container and designed...
Stainless steel cyclone separator IHP4 with 3/8" threaded connection. It enables inexpensive and efficient removal of water and impurities from compressed air. Working pressure...
The ADRY-60 series adsorption dryer was designed for continuous separation of water vapour from compressed air at flow rates up to 1,000 l/min. Reduces the pressure dew point...
Regulator with inlet up to 25 bar 3/8" thread for pressure reduction of compressed air and other non-volatile and non-toxic gases. Control range 0.5 to 16 bar up to a flow rate...
Replacement filter with capsule and molecular sieve for OMEGA AIR - AAFH2-198. Designed as a fuse against moisture leakage into the air during shutdown of ISO 8573-1 class 1...
Adsorption dryer BDRY-300 designed for permanent separation of water vapour from compressed air with a flow rate of up to 4,183 l/min at a maximum pressure of 16 bar and...
Replacement filter with capsule and molecular sieve for OMEGA AIR - AAFH2-335. Designed as a fuse against moisture leakage into the air during shutdown of ISO 8573-1 class 1...
Stainless steel cyclone separator IHP1 with threaded connection 1/2". It enables inexpensive and efficient removal of water and impurities from compressed air. Working pressure...
Replacement filter with capsule and molecular sieve for OMEGA AIR - AAFH2-510. Designed as a fuse against moisture leakage into the air during shutdown of ISO 8573-1 class 1...
Replacement filter with capsule and molecular sieve for OMEGA AIR - AAFH2-780. Designed as a fuse against moisture leakage into the air during shutdown of ISO 8573-1 class 1...
Refrigeration dryer for compressed air down to a dew point of +3°C. Maximum inlet pressure is 14 bar, with a flow rate of up to 100 m³/h (1 666 l/min) and connection via a G1"...
Connection cable 5 m - with straight connector designed for proportional DRPE controllers. Operating temperature -10 to +60 °C. Electrical protection IP65. Connection - 4-pole...
Connection cable 5 m - with angled connector designed for proportional DRPE controllers. Operating temperature -10 to +60 °C. Electrical protection IP65. Connection - 4-pole M12...
Condensation dryer for compressed air to +3°C dew point. Maximum input pressure is 14 bar with a flow rate of up to 380 m³/h (6,333 l/min) and connection via external thread G1...
Service kit for condensate evacuator IED for eelectronic IED triggers. The devices are primarily designed to drain condensed water from the filter vessels.
Condensation dryer for compressed air to +3°C dew point. Maximum input pressure is 14 bar with a flow rate of up to 180 m³/hour (3,000 l/min) and connection via external thread...
Filter cartridge for medical vacuum filter MVAC-0076V . Applications mainly in medical devices. Working pressure 20 to 2000 mbar, maximum flow up to 163 l/min.
Regulator with inlet up to 25 bar 3/8" thread for pressure reduction of compressed air and other non-volatile and non-toxic gases. Control range 0.5 to 16 bar up to a flow rate...
The extremely quiet and dust-free operation of the compressed air condensation dryer up to a flow rate of 72 m³/hr from the compressor at a 3°C dew point enables use in...
Cyclone separator CHP2 with 3/4" threaded connection. It enables inexpensive and efficient removal of water and impurities from compressed air. Working pressure 250 bar, working...
Condensation dryer for compressed air to +3°C dew point. Maximum input pressure is 14 bar with a flow rate of up to 1,500 m³/hour (25,000 l/min) and connection via external...
Filter insert for PVACM vacuum microfilter designed to protect vacuum pumps and vacuum pumps from solid impurities. Filtration capacity up to 0.01 um. Working pressure 20 to...
Replacement cyclone cartridge for liquid water filtration AAFC-2160V. Recommended replacement 12 months or every 4,000 MH and upon indication of clogging of the filter element...
HFC-150 cyclone separator with 2" threaded connection. It enables inexpensive and effective removal of water and impurities from compressed air. Working pressure 50 bar, working...
Replacement dust filter cartridge with 1 µm filtration capacity for OMEGA AIR AAFR-25 and AAFR-30 filters. Recommended replacement 12 months or every 4,000 MH and when clogging...
Filter insert for PVACM vacuum microfilter designed to protect vacuum pumps and vacuum pumps from solid impurities. Filtration capacity up to 0.01 um. Working pressure 20 to...
Replacement sintered bronze 15 µm filter cartridge for OMEGA AIR AAFB-120 filter. Recommended replacement 12 months or every 4,000 MH and when clogging of the filter cartridge...
The extremely quiet and dust-free operation of the compressed air condensation dryer up to a flow rate of 260 m³/hr from the compressor at a 3°C dew point enables use in...