Industrial compressed air filters Omega Air (pressure 16 to 64 bar)
Ensure your operation has absolutely clean and safe compressed air. The industrial series of filters from the renowned European manufacturer Omega Air is designed for reliable filtration even in the most demanding conditions with high pressures from 16 to 64 bar.
Key features and filtration parameters:
- ✅ Maximum efficiency: Filters are used for perfect removal of solid mechanical impurities, condensed water, oil aerosols, hydrocarbons, and unpleasant odors.
- ✅ Extreme purity: We offer various filtration levels covering the requirements of the ISO 8573-1 standard. The accuracy of filter cartridges starts from coarser 15 µm and reaches absolute microfiltration and activated carbon at the level of 0.005 µm.
- 🔹 High durability: Reliable operation guaranteed for the operating temperature of the passing medium in the range of +1.5 °C to +65 °C.
- ✔ Wide selection of models and connections: You can choose from top model series AF / AAF (classic threaded design), BF (robust flanged filters), HF (high-pressure cast iron), and CF. Connection is optional via thread or flange precisely according to your piping parameters.
Product sorting
List of products
The simplest way to drain condensate from pressure vessels and filter vessels. Connection by thread, control of the firing by a rotary pin.
Wall mounting kit. The set consists of angles that are attached to the edges of the filter and allow subsequent mounting on the wall. Fast and elegant installation that everyone...
AAFC cyclone separator in 1 1/2" design with a flow rate of 8,500 l/min for partial removal of condensate from compressed air. Here the flow changes to rotational and due to the...
AAFC cyclone separator in 1" design with a flow rate of 3,300 l/min for partial removal of condensate from compressed air. Here the flow changes to rotational and due to the...
The set allows the combination of 2 filters with different filtration capabilities into one block. Reduction of space required for installation. For filtration sizes AF-33 to...
The set allows the combination of 3 filters with different filtration capabilities into one block. Reduction of space required for installation. For filtration sizes AF-33 to...
AAFP basic filter in 3/8" design to remove basic mechanical impurities up to 3 um from compressed air according to ISO 8573-1 class 6. Body with easily removable container and...
AAFC cyclone separator in 3" design with a flow rate of 36,000 l/min for partial removal of condensate from compressed air. Here the flow changes to rotational and due to the...
AAFM 1/2" pre-filter for removing fine impurities up to 0.1 um from compressed air according to ISO 8573-1 class 2. Body with easily removable container and designed for a flow...
Replacement cyclone cartridge for liquid water filtration AAFC-198V. Recommended replacement 12 months or every 4,000 MH and upon indication of clogging of the filter element by...
Connection set for easy connection of two or more filters into one block in 1/2" threaded design. Universal design allowing the connection of filters from different...
AAFS 1/2" microfilter to remove micro impurities up to 0.01 um from compressed air according to ISO 8573-1 class 1. Body with easily removable container and designed for a flow...
AAFP basic filter in 1 1/2" design for removal of basic mechanical impurities up to 3 um from compressed air according to ISO 8573-1 class 6. Body with easily removable...
Replacement cyclone cartridge for liquid water filtration AAFC-60V. Recommended replacement 12 months or every 4,000 MH and upon indication of clogging of the filter element by...
AAFM pre-filter in 3/4" design for removal of fine impurities up to 0.1 um from compressed air according to ISO 8573-1 class 2. Body with easily removable container and designed...
MDM40 - basic version. Magnetic differential pressure gauges for displaying the orientation state of the filter cartridge. Fitted with dial with indicative scale and green/red...
Replacement cyclone insert for liquid water filtration AAFC-120V. Recommended replacement 12 months or every 4,000 MH and upon indication of clogging of the filter element by...
Replacement filter with activated carbon AAFA for OMEGA AIR AAFA-78. Use as a filter to remove residual oil content of oil vapours and aerosols with < 0.005 mg/m3from compressed...
AAFC cyclone separator in 3/4" design with a flow rate of 2,000 l/min for partial removal of condensate from compressed air. Here the flow changes to rotational and due to the...
Replacement basic filter cartridge with 3 µm filtration capacity for OMEGA AIR AAFP-78 filter. Recommended replacement 12 months or every 4,000 MH and when clogging of the...
AAFP 1" basic filter for removal of basic mechanical impurities up to 3 um from compressed air according to ISO 8573-1 class 6. Body with easily removable container and designed...
AAFP basic filter in 1 1/2" design for removal of basic mechanical impurities up to 3 um from compressed air according to ISO 8573-1 class 6. Body with easily removable...
Replacement cyclone cartridge for liquid water filtration AAFC-78V. Recommended replacement 12 months or every 4,000 MH and upon indication of clogging of the filter element by...
AAFC cyclone separator in 1/2" design with a flow rate of 1,300 l/min for partial removal of condensate from compressed air. Here the flow changes to rotational and due to the...
Replacement cyclone cartridge for liquid water filtration AAFC-1500V. Recommended replacement 12 months or every 4,000 MH and upon indication of clogging of the filter element...
Replacement cyclone insert for liquid water filtration AAFC-1000V. Recommended replacement 12 months or every 4,000 MH and upon indication of clogging of the filter element by...
Replacement microfilter cartridge with filtration capacity of 0.01 µm for OMEGA AIR AAFS-25 and AAFS-30 microfilters. Recommended replacement 12 months or every 4,000 MH and...
AAFC cyclone separator in 3/8" design with a flow rate of 1,000 l/min for partial removal of condensate from compressed air. Here the flow changes to rotational and due to the...
AAFC 2" cyclone separator with a flow rate of 25,000 l/min for partial removal of condensate from compressed air. Here the flow changes to rotational and due to the rotation and...
Wall mounting kit. The set consists of angles that are attached to the edges of the filter and allow subsequent mounting on the wall. Fast and elegant installation that everyone...
AAFC 2" cyclone separator with a flow rate of 16,667 l/min for partial removal of condensate from compressed air. Here the flow changes to rotational and due to the rotation and...
AAFP 1" basic filter for removal of basic mechanical impurities up to 3 um from compressed air according to ISO 8573-1 class 6. Body with easily removable container and designed...
Filter cartridge for HFM filter to remove mechanical impurities and oil from compressed air. Borosilicate microfibre insert with a filtration capacity of up to 0.1 μm. Working...
AFM filters are used to remove the largest mechanical impurities from compressed air up to 0.1 um according to ISO 8573-1 class 2. Body with easily removable container and...
Replacement dust filter cartridge with 1 µm filtration capacity for OMEGA AIR AAFR-35 and AAFR-60 filters. Recommended replacement 12 months or every 4,000 MH and when clogging...
AAFP basic filter in 1/2" design for removal of basic mechanical impurities up to 3 um from compressed air according to ISO 8573-1 class 6. Body with easily removable container...
Replacement filter with capsule and molecular sieve for OMEGA AIR - AAFH2-120. Designed as a fuse against moisture leakage into the air during shutdown of ISO 8573-1 class 1...
AAFA activated carbon filter in 3/8" version for absorption of residual oil, oil vapours and aerosols with < 0,005 mg/m3 from compressed air according to ISO 8573-1 class 1....
The filters are used to remove the largest mechanical impurities from compressed air up to 1 um according to ISO 8573-1 class 3. Body with easily removable container and...
AAFM 1" pre-filter for the removal of fine impurities up to 0.1 um from compressed air according to ISO 8573-1 class 2. Body with easily removable container and designed for a...