PA12 polyamide tube red 5/3 mm Outer diameter 5 mm, inner 3 mm, working pressure 23 bar

Code: PL53R
Not rated Rating details
€1,44 –5 %
Role červené polyamidové hadičky PA12 Longlife 5/3 mm
€1,44 –5 % €1,36 / m €1,12 excl. VAT Measure price:
up to 20 days
Delivery to:
21.12.2026
Delivery options

Red PA12 Longlife polyamide tube 5/3 mm for clear circuit marking. Working pressure 23 bar at 20 °C, full 100 m roll.

Detailed information

Free shipping
Free shipping
For purchases over 5,000 CZK
We guarantee
We guarantee
Extended warranty and service
Discount voucher
Discount voucher
For every purchase
Return of goods within 14 days
Return of goods within 14 days
Completely at our expense

Product detailed description

5/3 mmRoll of red PA12 Longlife polyamide tubing 5/3 mm

The red 5 mm tube draws attention to an important branch, for example the supply to a safety or measuring component with a 5 mm connection.

5 mmouter diameter D
3 mminner diameter d
23 barworking pressure at 20 °C
20 mmminimum bend radius

Dimensions and specifications

Cross-section of a PA12 Longlife tube 5/3 mm with dimensions for outer diameter D, inner diameter d and wall thickness s, other walls of the same outer diameter dashed
PL53R — specifications
Order codePL53R
Colourred
Outer diameter D5 mm
Inner diameter d3 mm
Wall thickness s1 mm
Working pressure at 20 °C23 bar
Working pressure at 60 / 80 °C12.7 / 10.4 bar
Burst pressure69 bar
Minimum bend radius20 mm
Working temperature−40 to +80 °C
Hardness72 °Sh
Weight13 g/m
Salefull 100 m roll only
Materialpolyamide PA12 Longlife
StandardsDIN 73378 / 74324
Mediumcompressed air

Typical uses

Use it to mark a branch that must not be touched, or a circuit that operators should find quickly. The 23 bar working pressure applies at 20 °C; at 80 °C allow for 10.4 bar.

A firm joint for the 5/3 mm size is offered by compression fittings with union nut. The smaller red tube is PL427R, the larger PL64R. Red tubes in other materials are shown in the overview red tubing.

Ventilek’s tip

Red says careful. Then nobody forgets the important branch during a repair.

Additional parameters

Category: PA12 Longlife polyamide tubing for compressed air
Pressure: 23 bar
Barva: Red
Material: Polyamide PA12-Longlife
Medium: Air
Bend radius: 20 mm
Working temperature: -40 / 80 °C
Hardness: 72 °Sh
Outer diameter: 5 mm
Inner diameter: 3 mm

Product rating

Be the first who will post an article to this item!

Do not fill out this field

How would you rate this product? Choose 1 to 5 stars, where 1 is the worst and 5 is the best rating.

Security check

By submitting your review you agree to the privacy policy

Mebra Plastik tubing is made by the Italian family company Mebra Plastik Italia. Mario Metti founded it in 1972 in a 100 m² garage, and today the second and third generations of the family run it. All production is in Busto Arsizio: four buildings with 33,500 m² turn out more than 65 million metres of tubing a year.

We offer tubing for pneumatics and automation in polyurethane and polyamide, fluoropolymer tubing for chemicals and high temperatures, spiral hoses for tools and tube cutters. It is used by large industrial plants, agriculture and workshops. Choose the material by pressure, temperature and how flexible the tube needs to be.

Mebra Plastik polyamide, polyurethane and PTFE tubing, a spiral hose and a tube cutterMade in Italy
1972the year Mebra Plastik Italia was founded
65 million mof tubing a year from Busto Arsizio
33,500 m²of production and storage in four buildings
+260 °CPTFE and PFA tubing can take

Mebra Plastik tubing by material

Blue Mebra Plastik PUJ polyurethane tubing in a coil

Polyurethane tubing

A flexible tube for pneumatics. Flexible tubing resistant to oxygen, ozone, vibration and ageing, for automation and measuring equipment.

  • PUJ, Elastollan C98, UV-resistant and twin
  • for mechanically stressed lines
  • temperature up to +60 °C
View tubing
Black Mebra Plastik PA11 polyamide tubing in a coil

Polyamide tubing

Rigid, pressure-resistant, for long runs. PA11 Rilsan polyamide tubing resistant to moisture, salt water, oils, chemicals and ageing.

  • PA11 Rilsan, PA12, PA6
  • PA12 Longlife to DIN 73378 and 74324
  • antistatic PA12 ATEX
View tubing
White Mebra Plastik TEF PTFE tubing in a coil

Fluoropolymer tubing

Chemicals and high temperatures. PTFE, FEP, PFA and PVDF tubing with excellent resistance to chemicals, ozone and UV light.

  • PTFE and PFA up to +260 °C
  • FEP very clear, up to +200 °C
  • PVDF for aggressive media
View tubing
Blue Mebra Plastik spiral hose with quick couplings

Spiral hoses for tools

A springy air line to blow guns and screwdrivers. Elastollan 1190 polyurethane with a spiral that springs back to shape, and extended straight ends.

  • with DN 7.2 quick couplings or plain ends
  • working length 1 to 13 m
  • temperature −40 to +60 °C
View hoses
Red Mebra Plastik PTP tube cutter

Tube cutters

A straight cut on plastic tubing. Special tools for easily cutting plastic tubes and pipes, in plastic and all-metal versions.

  • PTM and PTP plastic cutters
  • all-metal KTM and KTV for pipes
  • spare blades for the cutters
View cutters

Looking for soft PE tubing, food-grade silicone tubing or a protective spiral for hose bundles? All plastic hoses are sorted by material in one category.

All plastic hoses

Mebra Plastik tubing side by side

Material, medium, temperature and pressure
RangeMaterialMediumTemperaturePressure (example)
PUJpolyurethanecompressed air−20 to +60 °C10 bar (6/4 mm)
Elastollan C98, UV-resistant PUElastollan polyurethanecompressed air−40 to +60 °C10 bar (8/6 mm)
PA11 Rilsanpolyamide PA11air, oils, chemicals−40 to +80 °C27 bar (3/2 mm)
PA12 Longlifepolyamide PA12compressed air−40 to +100 °C33 bar (4/2.7 mm)
PA12 Extraflex, PA12 ATEXpolyamide PA12compressed air−30 to +80 °C15 bar (8/6 mm)
PA6polyamide PA6 (nylon)compressed air−20 to +60 °C19 bar (10/8 mm)
PEpolyethylenecompressed air−10 to +60 °C9 bar (8/6 mm)
PTFE (TEF)PTFEaggressive media−98 to +260 °C17 bar (4/2.5 mm)
PFA, FEPfluoropolymersaggressive media−60 to +260 / +200 °C9 / 7 bar (12/10 mm)
PVDFKynar HD4000aggressive media−40 to +100 °C47 bar (6/4 mm)
SILsiliconefood, beverages−60 to +200 °C1 bar (10/7 mm)
PUBM spiral hosesElastollan 1190 polyurethaneair to tools−40 to +60 °C10–11 bar

The pressure rating of a tube falls as its diameter grows. The pressure for each size is listed in the parameters of the individual tube.

How to choose and connect tubing

1. Material

For moving lines to cylinders and tools choose flexible polyurethane, for long fixed runs the more rigid polyamide. For chemicals and temperatures above +100 °C go for fluoropolymers.

2. Size

The outer diameter of the tube must match the push-in fitting or connector. Choose the inner diameter by the flow you need.

3. Cut

Shorten the tube with a cutter, square and without burrs. A slanted or frayed end will not seal in a push-in fitting.

4. Push in

Push the tube fully into the fitting and pull it back gently. To release it, press the collet of the fitting and pull the tube out.

Frequently asked questions

Polyurethane or polyamide?
Polyurethane is flexible and suits moving and mechanically stressed lines. Polyamide is more rigid, takes higher pressure and temperature and suits longer straight runs.
Which tube can take the highest temperature?
PTFE tubing works from −98 to +260 °C and PFA from −60 to +260 °C. For food up to +200 °C there is the SIL silicone tube.
My tubing runs outdoors – will it stand the sun?
For outdoor use there is UV-resistant polyurethane tubing made from Elastollan 1198 granulate. Fluoropolymers and PVDF also resist UV well.
Where does antistatic tubing belong?
In potentially explosive atmospheres. PA12 ATEX tubing is certified to ATEX II 2 G/D and rated at 15 bar in the 6/4 mm size.
Is Mebra Plastik the same as Membra Plastic?
Yes. We used to list the brand as Membra Plastic, but its correct name is Mebra Plastik, after the maker, the Italian company Mebra Plastik Italia of Busto Arsizio. The tubing and its web addresses have stayed the same.

The material, pressure and temperature of each tube are listed in its parameters. ELASTOLLAN® is a registered trademark of BASF; RILSAN® and KYNAR® are registered trademarks of Arkema.