Compressed air pressure hoses made of PVC
Polyvinyl chloride, commonly known by the abbreviation PVC, is the third most used plastic on Earth, right after polyethylene and polypropylene. Its traditional use is in construction, for example – PVC flooring says it all. Who would not know it…
PVC is, however, also a widely used plastic in the compressed air field. PVC hoses carry various kinds of media.
-
RWG water hose
-
RW water hose
-
HVX air hose
-
HV air hose
-
HVPU air hose
-
PLE oil hose
-
Flat air hoses
-
Oxygen hose GOX
-
Acetylene hose GAC
-
GWPB hose
-
TWIN double hoses
-
FKE water hose
-
Hose for petrol FUP
-
TU25 oil hose
-
HVSE air hose
-
RWC cooling hoses
-
Air Pro 10L/H hose
-
Air Pro 20L/H hose
-
Aqua Profi 10S Hose
-
Hose Multi Profi 10L
-
Hose Multi Profi MP
-
Lock Profi hoses
-
Hose Heat Profi 120
-
Steam Hose Profi 165
-
Fuel Profi PVC hose
-
Lock Profi ELP
Product sorting
List of products
HVX 14/9 mm hose set, 5 m, with DN 7.2 quick coupling and nipple. The most common workshop diameter, ready to connect, 16 bar.
HVX 18.5/13 mm hose with DN 7.2 quick coupling and nipple, 10 m long. For higher air consumption and a longer run, 16 bar.
HLA lay-flat compressed air hose 38 mm (1 1/2"), working pressure 20 bar, −30 to +100 °C, ribbed abrasion-resistant surface. Sold by the metre.
HVX 11/6 mm hose with DN 7.2 quick coupling and nipple, 10 m long. A light set for tools with low air consumption, 16 bar.
The longest ready-made set in the series: HVX 18.5/13 mm hose, 20 m, with DN 7.2 quick coupling and nipple. Working pressure 16 bar.
HVX 14/9 mm hose with DN 7.2 fittings, 10 m long. Quick coupling and nipple fitted at the factory, working pressure 16 bar.
HLA lay-flat hose 25 mm (1") for compressed air to hammers, working pressure 20 bar, burst pressure 60 bar, temperature −30 to +100 °C. By the metre.
HVX 18.5/13 mm hose set, 5 m, with DN 7.2 quick coupling and nipple. A large diameter for tools with high air consumption, 16 bar.
Ready-made set: HVX 11/6 mm hose, 5 m, with DN 7.2 quick coupling and nipple. Working pressure 16 bar, ready to connect straight away.
HLA lay-flat compressed air hose with a 19 mm inner diameter, working pressure 20 bar, −30 to +100 °C. Polyester yarn braid, sold by the metre.