OMEGA AIR, Page 70
Omega Air is a Slovenian manufacturer of compressed air treatment equipment based in Ljubljana. Founded in 1988, the company now has 370 employees and exports to more than 80 countries. It has its own development team and patents and carries out almost all production in its own facilities.
We mainly offer industrial filters up to 420 bar with replacement elements, stainless steel process and sterile filters, refrigeration, desiccant and membrane dryers, activated carbon columns, oil-water separators and condensate drains. They are used in workshops and large plants, in food, pharmaceuticals, chemicals and paint shops.
Slovenian manufacturerOmega Air filters, dryers and separators
Industrial filters up to 50 bar
Filters for standard air lines. AAF and BF ranges up to 16 bar, BFHP up to 25 bar and HF up to 50 bar. The element sets the filtration grade.
- from coarse filter to activated carbon
- G 1/8" to 3" thread or DN80 to DN300 flanges
- AAFHT for hot air up to +120 °C
CHP and IHP high-pressure filters
For 100, 250 and 420 bar. CHP housings are nickel-plated carbon steel, IHP housings stainless steel.
- 8 sizes with G 1/4" to 2" thread
- flow 667 to 11,917 l/min at 7 bar
- six grades up to activated carbon
Stainless steel process filters
1.4404 stainless steel for food and pharma. Six ranges up to 14 and 50 bar with thread, flanges or welding ends.
- 12 filtration grades in each range
- sterile element in the PF and HPF ranges
- flow 1,250 to 352,000 l/min at 7 bar
RDS refrigeration dryers
Dew point +3 °C for most plants. The air cools down in the dryer, water condenses and the drain removes it without losing air.
- 18 sizes, 333 to 31,667 l/min
- working pressure up to 16 bar
- controller shows the dew point
ADRY desiccant dryers
Very dry air, dew point −40 °C. Moisture is captured by desiccant in two alternating columns.
- 9 sizes, 6 to 200 Nm³/h
- dew point −25 or −70 °C on request
- inlet and outlet filter included
MADRY membrane dryers
They dry without electricity. Water vapour passes through the wall of hollow fibres, dry air stays inside.
- 12 sizes, 50 to 3,000 l/min
- dew point down to −40 °C, up to 12 bar
- fine pre-filter and microfilter included
TAC activated carbon columns
They capture oil vapours that filters let through. The air flows through a bed of granular activated carbon.
- outlet oil below 0.003 mg/m³
- 19 sizes, 6 to 1,200 Nm³/h
- up to 16 bar, high-pressure TACHP up to 420 bar
WOS oil-water separators
They separate oil from condensate. Oil stays in the polypropylene fibre and activated carbon fills, water flows out.
- residual oil below 10 ppm
- 4 sizes for compressors up to 35.5 m³/min
- fills are replaced once a year
Not sure which filtration grades you need? The calculator in industrial filtration puts them together by application, pressure and flow, including condensate drainage.
Filtration calculatorOmega Air range side by side
| Group, series, rating and use | |||
|---|---|---|---|
| Group | Series | Rating | Use |
| Industrial filters | AAF, AAFHT, BF, BFHP, HF | up to 16, 25 and 50 bar | compressed air lines, hot air up to +120 °C |
| High-pressure filters | CHP, IHP | 100, 250 and 420 bar | high-pressure lines |
| Stainless steel process filters | PF, HPF, WFIT, WFIF, WFIW, WHFIT | up to 14 and 50 bar | food, pharmaceuticals, chemicals |
| Sterile filters | SF, SPF | up to 10 and 14 bar | sterile air, they also retain bacteria |
| Filters for special applications | AAFS, PPA, B-AIR, AAFO2, HFO2, P-VAC, M-VAC | up to 16 and 50 bar, vacuum from 20 mbar | paint shops, breathing air, oxygen, vacuum pumps |
| Cyclone separators | AAFC, HFC, CHP, IHP, CS, SFH | up to 16, 50 and 420 bar | liquid water and oil right after the compressor |
| Refrigeration dryers | RDS, RDL | up to 16 and 13 bar | dew point +3 and +5 °C |
| Desiccant dryers | ADRY, B-DRY, F-DRY | 4 to 16 bar | dew point −40 °C, −25 or −70 °C on request |
| Membrane dryers | MADRY | up to 12 bar | dew point down to −40 °C without electricity |
| Activated carbon columns | TACM, TAC, TACF, TACHP | up to 16 bar, TACHP up to 420 bar | oil vapours, oil below 0.003 mg/m³ |
| Oil-water separators | WOS, WOSM | compressors up to 35.5 m³/min | oil from condensate below 10 and 20 ppm |
| Condensate drains | MCD, AOK, TD, AD20 | up to 420 bar | manual, float, timed and electronic |
The manufacturer states filter and dryer flows at 7 bar. All sizes and grades are on the page of each group.
How to put compressed air treatment together
1. Define the quality
Choose the ISO 8573-1 purity class for the application: three numbers for solid particles, water and oil. A workshop needs 3:4:4, painting 1:4:1 and food in direct contact 1:2:1.
2. Order the grades
A separator or basic filter goes right after the compressor, followed by the dryer and the finer grades. Always place the 0.1 µm fine pre-filter before the 0.01 µm microfilter and activated carbon only after the microfilter.
3. Choose the size
Select the filter and dryer by compressor flow and line pressure. Flows are given at 7 bar; at lower pressure a filter passes less air.
4. Maintain
Replace elements once a year, sooner if the pressure drop rises. Remove condensate with a drain and replace the WOS separator fills once a year.
Frequently asked questions
- What is the difference between a fine pre-filter and a microfilter?
- A fine pre-filter captures particles down to 0.1 µm and oil to 0.1 mg/m³, a microfilter down to 0.01 µm and 0.01 mg/m³. The pre-filter always goes before the microfilter to protect its element.
- How do I find a replacement element for an Omega Air filter?
- The element has the same code as the filter with the letter V at the end: the AAFP-78 filter takes the AAFP-78V element. Most elements are replaced once a year, sooner if the indicator shows a higher pressure drop.
- Which Omega Air dryer should I choose?
- For workshops and most plants an RDS refrigeration dryer with a +3 °C dew point is enough. Very dry air or lines exposed to frost need an ADRY desiccant dryer with a −40 °C dew point. The MADRY membrane dryer needs no electricity and suits small flows right at the machine.
- Where does an activated carbon column go?
- After the dryer and a 0.01 µm microfilter, which captures oil droplets and aerosol. The column then removes oil vapours below 0.003 mg/m³. A 1 µm dust filter goes after it to catch dust from the carbon.
- What is an oil-water separator for?
- Condensate from an oil-lubricated compressor contains oil and must not go into the sewer untreated. The WOS separator captures the oil in its fills and water flows out with less than 10 ppm residual oil. The discharge limit is set by the local sewer regulations.
- Which condensate drains does Omega Air make?
- Manual MCD drains, float AOK drains that work without electricity, timed TD drains up to 420 bar and the electronic AD20. It senses the level with a capacitive sensor and drains condensate without losing air.
Most Omega Air product pages have a technical data sheet or drawing to download; AAF filters and ADRY and MADRY dryers also come with a manual in Czech. Omega Air is a brand of the Slovenian company OMEGA AIR d.o.o. Ljubljana.
Product sorting
List of products
Spare element IHPA-018V for the IHP1A-018, IHP2A-018 and IHP4A-018 activated carbon filters — activated carbon. Replace the activated carbon element every 6 months — it is not...
Spare element IHPA-010V for the IHP1A-010, IHP2A-010 and IHP4A-010 activated carbon filters — activated carbon. Replace the activated carbon element every 6 months — it is not...
Spare element IHPA-007V for the IHP1A-007, IHP2A-007 and IHP4A-007 activated carbon filters — activated carbon. Replace the activated carbon element every 6 months — it is not...
Spare element IHPA-005V for the IHP1A-005, IHP2A-005 and IHP4A-005 activated carbon filters — activated carbon. Replace the activated carbon element every 6 months — it is not...
Spare element IHPA-003V for the IHP1A-003, IHP2A-003 and IHP4A-003 activated carbon filters — activated carbon. Replace the activated carbon element every 6 months — it is not...
Spare element IHPS-094V for the IHP1S-094, IHP2S-094 and IHP4S-094 microfilters — borosilicate microfibres. Replace the element at a pressure drop of 350 mbar, at least once...
Spare element IHPS-047V for the IHP1S-047, IHP2S-047 and IHP4S-047 microfilters — borosilicate microfibres. Replace the element at a pressure drop of 350 mbar, at least once...
Spare element IHPS-030V for the IHP1S-030, IHP2S-030 and IHP4S-030 microfilters — borosilicate microfibres. Replace the element at a pressure drop of 350 mbar, at least once...
Spare element IHPS-018V for the IHP1S-018, IHP2S-018 and IHP4S-018 microfilters — borosilicate microfibres. Replace the element at a pressure drop of 350 mbar, at least once...
Spare element IHPS-010V for the IHP1S-010, IHP2S-010 and IHP4S-010 microfilters — borosilicate microfibres. Replace the element at a pressure drop of 350 mbar, at least once...
Spare element IHPS-007V for the IHP1S-007, IHP2S-007 and IHP4S-007 microfilters — borosilicate microfibres. Replace the element at a pressure drop of 350 mbar, at least once...
Spare element IHPS-005V for the IHP1S-005, IHP2S-005 and IHP4S-005 microfilters — borosilicate microfibres. Replace the element at a pressure drop of 350 mbar, at least once...
Spare element IHPS-003V for the IHP1S-003, IHP2S-003 and IHP4S-003 microfilters — borosilicate microfibres. Replace the element at a pressure drop of 350 mbar, at least once...
Spare element IHPM-094V for the IHP1M-094, IHP2M-094 and IHP4M-094 fine pre-filters — borosilicate microfibres. Replace the element at a pressure drop of 350 mbar, at least once...
Spare element IHPM-047V for the IHP1M-047, IHP2M-047 and IHP4M-047 fine pre-filters — borosilicate microfibres. Replace the element at a pressure drop of 350 mbar, at least once...
Spare element IHPM-030V for the IHP1M-030, IHP2M-030 and IHP4M-030 fine pre-filters — borosilicate microfibres. Replace the element at a pressure drop of 350 mbar, at least once...
Spare element IHPM-018V for the IHP1M-018, IHP2M-018 and IHP4M-018 fine pre-filters — borosilicate microfibres. Replace the element at a pressure drop of 350 mbar, at least once...
Spare element IHPM-010V for the IHP1M-010, IHP2M-010 and IHP4M-010 fine pre-filters — borosilicate microfibres. Replace the element at a pressure drop of 350 mbar, at least once...
Spare element IHPM-007V for the IHP1M-007, IHP2M-007 and IHP4M-007 fine pre-filters — borosilicate microfibres. Replace the element at a pressure drop of 350 mbar, at least once...
Spare element IHPM-005V for the IHP1M-005, IHP2M-005 and IHP4M-005 fine pre-filters — borosilicate microfibres. Replace the element at a pressure drop of 350 mbar, at least once...
Spare element IHPM-003V for the IHP1M-003, IHP2M-003 and IHP4M-003 fine pre-filters — borosilicate microfibres. Replace the element at a pressure drop of 350 mbar, at least once...
Spare element IHPN5-094V for the IHP1N5-094, IHP2N5-094 and IHP4N5-094 basic filters — stainless steel mesh 1.4301. Replace the element at least once every 12 months.
Spare element IHPN5-047V for the IHP1N5-047, IHP2N5-047 and IHP4N5-047 basic filters — stainless steel mesh 1.4301. Replace the element at least once every 12 months.
Spare element IHPN5-030V for the IHP1N5-030, IHP2N5-030 and IHP4N5-030 basic filters — stainless steel mesh 1.4301. Replace the element at least once every 12 months.
Spare element IHPN5-018V for the IHP1N5-018, IHP2N5-018 and IHP4N5-018 basic filters — stainless steel mesh 1.4301. Replace the element at least once every 12 months.
Spare element IHPN5-010V for the IHP1N5-010, IHP2N5-010 and IHP4N5-010 basic filters — stainless steel mesh 1.4301. Replace the element at least once every 12 months.
Spare element IHPN5-007V for the IHP1N5-007, IHP2N5-007 and IHP4N5-007 basic filters — stainless steel mesh 1.4301. Replace the element at least once every 12 months.
Spare element IHPN5-005V for the IHP1N5-005, IHP2N5-005 and IHP4N5-005 basic filters — stainless steel mesh 1.4301. Replace the element at least once every 12 months.
Spare element IHPN5-003V for the IHP1N5-003, IHP2N5-003 and IHP4N5-003 basic filters — stainless steel mesh 1.4301. Replace the element at least once every 12 months.
Spare element IHPN25-094V for the IHP1N25-094, IHP2N25-094 and IHP4N25-094 coarse filters — stainless steel mesh 1.4301. Replace the element at least once every 12 months.
Spare element IHPN25-047V for the IHP1N25-047, IHP2N25-047 and IHP4N25-047 coarse filters — stainless steel mesh 1.4301. Replace the element at least once every 12 months.
Spare element IHPN25-030V for the IHP1N25-030, IHP2N25-030 and IHP4N25-030 coarse filters — stainless steel mesh 1.4301. Replace the element at least once every 12 months.
Spare element IHPN25-018V for the IHP1N25-018, IHP2N25-018 and IHP4N25-018 coarse filters — stainless steel mesh 1.4301. Replace the element at least once every 12 months.
Spare element IHPN25-010V for the IHP1N25-010, IHP2N25-010 and IHP4N25-010 coarse filters — stainless steel mesh 1.4301. Replace the element at least once every 12 months.
Spare element IHPN25-007V for the IHP1N25-007, IHP2N25-007 and IHP4N25-007 coarse filters — stainless steel mesh 1.4301. Replace the element at least once every 12 months.
Spare element IHPN25-005V for the IHP1N25-005, IHP2N25-005 and IHP4N25-005 coarse filters — stainless steel mesh 1.4301. Replace the element at least once every 12 months.
Spare element IHPN25-003V for the IHP1N25-003, IHP2N25-003 and IHP4N25-003 coarse filters — stainless steel mesh 1.4301. Replace the element at least once every 12 months.