Soft-start unit FUTURA BFMCL014-115VAC - 115 V AC, G 1/4" 1,300 l/min · 115 V AC · size 0
Code: BFMCL014-115VAC
Related products
Product detailed description
The soft-start unit combines a soft-start valve and an electrically operated 3/2 valve. The coil switches the filling on, the machine then fills gradually and gets full flow at about half the inlet pressure.
Specifications
| BFMCL014-115VAC — specifications | |
|---|---|
| Type | Soft-start unit |
| Connection | G 1/4" female thread |
| Size | 0 (module width 43 mm) |
| Inlet pressure | 2.5–10 bar |
| Flow | 1,300 l/min |
| Function | gradual filling through a throttle orifice |
| Full flow from | about 50 % of inlet pressure |
| Actuation | electric, pilot valve with coil |
| Coil voltage | 115 V AC |
| Coil | 2.5 W (DC), 3 VA (AC), IP 65 |
| Outlet exhaust port | G 1/4" |
| Width × height | 86 × 138 mm |
| Material | glass-fibre reinforced polyamide body, NBR seals |
| Working temperature | −10 to +50 °C |
| Medium | lubricated or non-lubricated compressed air and neutral gases |
| Potentially explosive atmospheres | no |
What it is for
It suits places where the machine should only be pressurised on a command from the control system, for example after the start button is pressed. Size 0 is suitable for individual machines and tools with lower air consumption.
Parts for this size: spare pilot valve MCL-F24VDC, MCL-F230VAC, MCL-F115VAC · mounting bracket W0F · connection kit KP0F · connection kit with wall bracket KPW0F · threaded wall brackets WK0-14F.
Potentially explosive atmospheres
An electrically operated component is not for use in potentially explosive atmospheres: its pilot valve with coil would need its own design for explosive atmospheres. For the zones, choose the air-operated version.
Ventilek’s tip
Switching on and gradual filling in one. You do not need a separate 3/2 valve and soft-start valve.
Additional parameters
| Category: | FUTURA soft-start valves, check valves and manifold modules for ATEX up to 16 bar |
|---|---|
| Version: | Filling valve |
| Pressure: | 10 bars |
| Dimensions: | 138 × 86 mm |
| Electric voltage: | 115 V AC |
| Medium: | Compressed air |
| Working temperature: | -10 / 50 °C |
| Flow: | 1,300 l/min |
| Thread: | G 1/4" |
Product rating
Be the first who will post an article to this item!
Discussion
Be the first who will post an article to this item!
From the basement to the worldThe German company KNOCKS FLUID Technik was founded as a family business in 1970. The company, which in its early days was run by its founder in the basement of his house, has grown into one of the leaders in the compressed air industry in less than 50 years. But the company continues to keep pace, and year after year its ranks have grown, while the development of new technologies has not been overlooked. But it wasn't just the desire for expansion, but also the desire for excellence that kept the company going. In 2004, the certification according to ISO 9001: 2000 came quite logically. The complete production of the entire product range is carried out at the company's headquarters in Selm, where, for example, proportional regulators, various types of couplings, pressure regulators, as well as silent blocks are produced. |
 |
 |
Modern technologies sanctify qualityFrom a one-man enterprise, it is now a company of 140 employees who are responsible for the quality of its products. This is helped by state-of-the-art tools and technologies such as production machines and QA systems, electronic test benches or 3D CAD systems. The KNOCKS brand is now an internationally sought-after brand with sales offices all over the world. Kompresory vzduchotechnika s.r.o. is one of them. A wide range of products from this popular brand can be found below. |