100 mm
100 mm compressed air piping is designed for the most demanding industrial applications, where large volumes of air have to be distributed over long distances. This diameter forms the backbone of the network for extensive production halls, technology centres or plants with centrally controlled pneumatic systems.
#ShowMore#
For maximum performance without compromise
The 100 mm system offers extreme flow capacity and exceptionally low pressure losses. It serves as the main line from which smaller-diameter branches such as 80 mm, 63 mm or 50 mm run off. It is ideal wherever compressed air must travel long routes without any drop in performance.
🔹 Advantages of the 100 mm system:
- Maximised compressed air flow
- Minimal pressure losses even over tens of metres
- Top mechanical and chemical resistance
- Designed for plants in continuous, demanding operation
The system consists of durable aluminium tubes, robust couplings, transition fittings and complete mounting accessories. It allows fast, reliable installation that holds up even under high pressure loads.
Smart networks save money
With networks this large, correct planning is especially important – both in calculating flow and in the efficiency of the route. You will find everything essential in our expert article Compressed air networks – how to design an efficient system, which also covers dimensions above 80 mm.
🔗 Take a look at the other sizes too:
🧩 The complete offer is in the main compressed air network category.
.png)
Product sorting
List of products
Powder-coated blue aluminium pipe with a dimension of 100 / 94 mm for piping of compressed air and inert gases up to 16 bar. Pipe material - AW-6060 T6 alloy.
big AIRnet 90° elbow with 100 mm clearance. The couplings are characterised by their simple assembly. Operating pressure 13 bar, operating temperature -20 to +70 °C. UV, oil...
Flange support for 100 mm dimension. The system is characterised by its simple and quick installation. Operating pressure 13 bar, operating temperature -20 to +70 °C.
Manual deburring scraper for air ductwork. Easy and fast installation, low pressure gradient, resistant to mechanical damage, UV radiation and corrosion. Operating temperature...
Gasket for Airnet flange DN100. The system is characterised by its simple and quick installation. Operating pressure 13 bar, operating temperature -20 to +70 °C. UV, oil and...
Airnet pipe clamp 100 mm. The entire Airnet system is easy to install. Operating pressure 13 bar, operating temperature -20 to +70 °C. UV, oil and corrosion resistant.
AIRnet tap with thread G1" - 100 mm. The couplings are characterised by their simple and quick assembly. Operating pressure 13 bar, operating temperature -20 to +70 °C. UV, oil...
Airnet flange coupling DN 100. The system is characterised by its simple and quick installation. Operating pressure 13 bar, operating temperature -20 to +70 °C. UV, oil and...
Airnet clamp base for 100 mm pipes. The entire Airnet system is easy to install. Operating pressure 13 bar, operating temperature -20 to +70 °C. UV, oil and corrosion resistant.
Big AIRnet series T-coupling with G1" thread and 100 mm coupling. The couplings are characterised by their simple and quick assembly. Operating pressure 13 bar, operating...
Shut-off flap with 100 mm coupling. The system is characterised by its simple and quick installation. Operating pressure 13 bar, operating temperature -20 to +70 °C. UV, oil...
AIRnet Big straight coupling with 100 mm clearance. The couplings are characterised by their simple assembly. Operating pressure 13 bar, operating temperature -20 to +70 °C....
45° elbow of the Big AIRnet series with a clearance of 100 mm. The couplings are characterised by their simple assembly. Operating pressure 13 bar, operating temperature -20 to...
Pipe cutter 50 - 100 mm for installation of the Airnet pipe system
AIRnet Big 100 mm series plug. The couplings are characterised by their simple and quick assembly. Operating pressure 13 bar, operating temperature -20 to +70 °C. UV, oil and...
Reduced T-coupling Big AIRnet series with 100 - 50 mm clearance. The couplings are characterised by their simple and quick assembly. Operating pressure 13 bar, operating...
Reduced T-coupling Big AIRnet series with 100 - 63 mm clearance. The couplings are characterised by their simple and quick assembly. Operating pressure 13 bar, operating...
Reduced T-coupling Big AIRnet series with 100 - 80 mm clearance. The couplings are characterised by their simple and quick assembly. Operating pressure 13 bar, operating...
Reduced T-coupling Big AIRnet series with 158 - 100 mm clearance. The couplings are characterised by their simple and quick assembly. Operating pressure 13 bar, operating...
AIRnet Big series reducers with 100 - 158 mm clearance. The reducers are characterised by their simple assembly. Operating pressure 13 bar, operating temperature -20 to +70 °C....
AIRnet Big series reducers with 80 - 100 mm clearance. The reducers are characterised by their simple assembly. Operating pressure 13 bar, operating temperature -20 to +70 °C....
Screw set for Airnet flange DN100. The system is characterised by its simple and quick installation. Operating pressure 13 bar, operating temperature -20 to +70 °C.
T-coupling of the Big AIRnet series with a clearance of 100 mm. The couplings are characterised by their simple and quick assembly. Operating pressure 13 bar, operating...