Manifold module with pressure switch FUTURA VBCL12-F-PE - G 1/2" 7,250 l/min · size 2
Code: VBCL12-F-PE
Related products
Product detailed description
A manifold module with a pressure switch on the top port. The switch, with a range of 0.2–16 bar and a changeover contact, gives a signal when the air line pressure falls below or rises above the set value.
Specifications
| VBCL12-F-PE — specifications | |
|---|---|
| Type | Manifold module with pressure switch |
| Connection | G 1/2" female thread |
| Size | 2 (module width 63 mm) |
| Inlet pressure | 0–16 bar |
| Flow | 7,250 l/min |
| Side ports | top G 1/4", bottom G 1/2", front and rear G 3/8" |
| Pressure switch | 0.2–16 bar, changeover contact, 12–30 V DC up to 3 A, 12–250 V AC up to 5 A |
| Width × height | 63 × 81 mm |
| Material | glass-fibre reinforced polyamide body, NBR seals |
| Working temperature | −10 to +50 °C |
| Medium | lubricated or non-lubricated compressed air and neutral gases |
| Potentially explosive atmospheres | no |
What it is for
It suits monitoring the pressure before a machine, for example so that the machine does not start without pressure. Size 2 is suitable for machines and larger air lines.
Parts for this size: mounting bracket W2F · connection kit KP2F · connection kit with wall bracket KPW2F · threaded wall brackets WK2-12F.
Potentially explosive atmospheres
The manifold module with pressure switch is not for use in potentially explosive atmospheres.
Ventilek’s tip
Four-pin connector. The switch handles both DC and AC voltage.
Additional parameters
| Category: | FUTURA soft-start valves, check valves and manifold modules for ATEX up to 16 bar |
|---|---|
| Version: | Manifold module |
| Pressure: | 16 bar |
| Dimensions: | 81 × 63 mm |
| Medium: | Compressed air |
| Working temperature: | -10 / 50 °C |
| Flow: | 7,250 l/min |
| Thread: | G 1/2" |
| In stock: | External warehouse |
Product rating
Be the first who will post an article to this item!
From the basement to the worldThe German company KNOCKS FLUID Technik was founded as a family business in 1970. The company, which in its early days was run by its founder in the basement of his house, has grown into one of the leaders in the compressed air industry in less than 50 years. But the company continues to keep pace, and year after year its ranks have grown, while the development of new technologies has not been overlooked. But it wasn't just the desire for expansion, but also the desire for excellence that kept the company going. In 2004, the certification according to ISO 9001: 2000 came quite logically. The complete production of the entire product range is carried out at the company's headquarters in Selm, where, for example, proportional regulators, various types of couplings, pressure regulators, as well as silent blocks are produced. |
 |
 |
Modern technologies sanctify qualityFrom a one-man enterprise, it is now a company of 140 employees who are responsible for the quality of its products. This is helped by state-of-the-art tools and technologies such as production machines and QA systems, electronic test benches or 3D CAD systems. The KNOCKS brand is now an internationally sought-after brand with sales offices all over the world. Kompresory vzduchotechnika s.r.o. is one of them. A wide range of products from this popular brand can be found below. |