Filtration, regulation and treatment of compressed air, Page 11
-hankison-susicka-vzduch-kompresor-tllak-kondenzace-rosny-bod.jpg)
Product sorting
List of products
The BFM pre-filter insert is used to remove mechanical impurities and oil from the compressed air. Borosilicate microfibre insert with a filtration capacity of up to 0.1 μm....
The HFS filter insert removes mechanical impurities and oil from the compressed air. Borosilicate microfibre insert with a filtration capacity of up to 0.01 μm. Working pressure...
Replacement cartridge WOS-35A for water-oil separators. Active carbon filtration. Residual oil less than 10 ppm. The maximum flow rate is 35 000 l/min.
Replacement filter with activated carbon AAFA2 for OMEGA AIR AAFA2-78. Use as a filter to remove residual oil content of oil vapours and aerosols with < 0.005 mg/m3from...
Air treatment units A1. Air lubrication for pneumatic tools and automation technology. Oil in the air extends the life of pneumatic components. Lubricator design 1/4" with air...
AAFM pre-filter in 3/4" design for removal of fine impurities up to 0.1 um from compressed air according to ISO 8573-1 class 2. Body with easily removable container and designed...
The ADRY-105 Series Adsorption Dryer was designed for continuous separation of water vapor from compressed air at flow rates up to 1,750 l/min. Reduces the pressure dew point...
The ADRY-150 Series Adsorption Dryer was designed for continuous separation of water vapor from compressed air at flow rates up to 2,500 l/min. Reduces the pressure dew point...
Complete air treatment units are used wherever compressed air needs to be regulated, filtered and lubricated. With the complete units, we can obtain compressed air treated to 5...
Condensing compressed air dryer for dew point +5°C. Maximum inlet pressure is 13 bar with a flow rate of up to 75 m³/hr (1,250 l/min) and connection via G 3/4" male thread. The...
Condensation dryer for compressed air to +3°C dew point. Maximum input pressure is 14 bar with a flow rate of up to 950 m³/h (15,833 l/min) and connection via external thread...
Air treatment units A1. Simple air filtration at 5 um. Filter design 1/4" with air flow 800 l/min. Semi-automatic condensate discharge in the flask.
Float-operated condensate drain valve for compressed air systems up to 13 bar. Version AOK13PA for external mounting on the filter body with 1/2" thread.
Float-operated condensate drain valve for compressed air systems up to 20 bar. Version AOK20B for external mounting on the filter body with 1/2" thread.
Compressed air treatment unit in metal design up to 18 bar. Comprehensive treatment in one 1/2" unit with flow rates up to 2,500 l/min. All the benefits of separate parts....
Compressed air treatment unit in metal design up to 18 bar. Comprehensive treatment in one 3/8" unit with flow rates up to 2,500 l/min. All the benefits of separate parts....
Hankison 's NGF series NGF type PF basic ISO compressed air filtration. Filter size F07 with 3/4" female thread connection. The filter is equipped with a clogging indicator and...
Hankison 's NGF series NGF type PF basic ISO compressed air filtration. Filter size F06 with 3/4" female thread connection. The filter is equipped with a clogging indicator and...
Electronic IEDs are primarily designed to drain condensed water from filter vessels. Equipped with LED indicator and test button. Operating temperature +1,5 °C to +65 °C,...
The BFS microfiltration insert is used to remove mechanical impurities and oil from compressed air. Borosilicate microfibre insert with a filtration capacity of up to 0.01 μm....
Size 1 mounting nut for FUTURA air treatment units such as pressure regulator or pressure regulator with filter. For mounting the angle for fixing the unit.
Standard connection set for FUTURA size 1 air handling units without wall bracket. The kit can be used to connect any 2 modules of a given size together without the need for...
Metal filter for filtration of compressed air from a compressor at 20 um to 18 bar with a maximum flow rate of 4,100 l/min. Connection 1/2" pipe thread. Possibility to change...
Metal filter for filtration of compressed air from a compressor at 20 um to 18 bar with a maximum flow rate of 9,100 l/min. Connection 3/4" pipe thread. Possibility to change...
Compressed air treatment units in metal design up to 18 bar. Compressed air control with a flow rate of 650 l/min in 1/4" size. Application mainly in industry, laboratory,...
Fixing angle for air treatment units A2R-14, A2S-14. Attachment by means of a lock nut on the pressure regulator.
Accessories and spare parts for METAL WORK air treatment units. Mounting angle for mounting units in sizes 3/8"-1/2".
Hankison 's NGF series SF type basic ISO filter for compressed air. Filter size F02 with 1/4" female thread connection. The filter is equipped with a clogging indicator and an...
Hankison 's NGF series SF type basic ISO filter for compressed air. Filter size F06 with 3/4" female thread connection. The filter is equipped with a clogging indicator and an...
Pressure regulator with 5 um air filtration for compressed air with or without oil and for neutral gases up to 16 bar. Design according to ATEX II 2G2D. The adjusting pin can be...
Compressed air treatment units in metal design up to 18 bar. Compressed air control with 700 l/min flow rate in 1/4" size. Application mainly in industry, laboratory, measuring...
Replacement basic filter cartridge with 3 µm filtration capacity for OMEGA AIR AAFP-35 and AAFP-60 filters. Recommended replacement 12 months or every 4,000 MH and when clogging...
Replacement filter with activated carbon AAFA for OMEGA AIR AAFA-510. Absorption of residual oil, oil vapours and aerosols with a content of < 0.005 mg/m³ from compressed air...
Replacement microfiltration cartridge with filtration capacity 0,01 µm for OMEGA AIR AAFS-780 microfilters. Recommended replacement 12 months or every 4,000 MH and when clogging...
AFSS silicone-free microfilter with G3/8" connection thread designed for industrial painting applications, eliminates paint deteriorating contaminants. Filtration capacity 0,01...
Water-oil separators chemically separate oil and solid impurities from the condensate from the water, which can then be discharged into the waste. They contribute to a high...
Air pressure regulator in metal design up to 18 bar. Compressed air regulator with a flow rate of 2,600 l/min in size 2 1/2" thread. Regulation range 0 - 12 bar. Application...
The WDF-1800 condensing air dryer provides high-capacity compressed air drying with a flow rate of 1,800 m³/h (30,000 l/min) and a pressure dew point of +3 °C. Integrated...
The WDF-1388 condensing air dryer provides highly efficient compressed air drying with a flow rate of 1,388 m³/h (23,133 l/min) and a pressure dew point of +3 °C. Thanks to the...
The WDF-1200 condensing air dryer provides high-capacity compressed air drying with a flow rate of 1,200 m³/h (20,000 l/min) and a pressure dew point of +3 °C. Integrated...