Safety pressure regulator with filter FUTURA FR14-8F-SI - G 1/4", 0.5–8 bar 2,000 l/min · 5 µm · size 1 · ATEX
Code: FR14-8F-SI FR14-8F-AMSI Choose variant
Related products
Product detailed description
A 5 µm filter and a pressure regulator in one body. Centrifugal force separates water droplets and coarse dirt into the bowl, the sintered element traps particles above 5 µm, and the regulator then reduces the pressure to the set value. It relieves excess outlet pressure by itself. The safety version has a ball valve before the regulator, which exhausts the outlet in the closed position and can be locked with a padlock, and a soft-start valve, which fills the air line gradually after start-up.
Specifications
| FR14-8F-SI — specifications | |
|---|---|
| Type | Safety pressure regulator with filter |
| Connection | G 1/4" female thread |
| Size | 1 (module width 52 mm) |
| Inlet pressure | 1.5–16 bar |
| Setting range | 0.5–8 bar |
| Flow | 2,000 l/min |
| Filter rating | 5 µm |
| Max. condensate volume | 28 cm³ |
| Bowl | plastic, metal as a variant |
| Condensate drain | semi-automatic, automatic as a variant |
| Pressure gauge | Ø 50 mm, 0–10 bar, included |
| Gauge port | G 1/4" |
| Setting lock | by pushing the knob in, with VHS 20 padlock |
| Relief flow | 70 l/min |
| Material | glass-fibre reinforced polyamide body, POM spring cover, NBR diaphragm and seals |
| Working temperature | −10 to +50 °C |
| Medium | compressed air and neutral gases |
| Potentially explosive atmospheres | yes, zones 1, 2, 21 and 22, T4 |
Versions
Choose the version at the top of the page. Each version has its own order number.
| Order number | Bowl | Condensate drain |
|---|---|---|
| FR14-8F-SI | plastic with protective guard | semi-automatic |
| FR14-8F-AMSI | plastic with protective guard | automatic |
What it is for
It saves space and one connection where you need clean air at a constant pressure without lubrication. Size 1 is suitable for tools and smaller machines.
Parts for this size: spare filter element FV-1F · replacement bowl BF1F, BFM1F · bowl sealing ring OR1F · spare diaphragm MEMBRANER14F · spring cover FEDERHAUBE1F · knob FEDERHAUBE1F-RAD · padlock for the knob VHS20 · panel mounting nut SM1F · mounting bracket W1F · connection kit KP1F · connection kit with wall bracket KPW1F · threaded wall brackets WK1-14F.
Potentially explosive atmospheres
A mechanical device with no ignition source of its own. According to the declaration regarding Directive 2014/34/EU, you can use it in zones 1 and 2 (gases IIA, IIB, IIC) and 21 and 22 (dust IIIA, IIIB), temperature class T4, under the conditions described for the FUTURA range. We will send you the declaration on request.
Ventilek’s tip
Upright, bowl down. Only then does the condensate run down to the bottom of the bowl instead of being carried on into the air line.
Additional parameters
| Category: | FUTURA pressure regulators with filter for ATEX environments up to 16 bar |
|---|---|
| Version: | Pressure regulator with filter |
| Pressure: | 16 bar |
| Dimensions: | 52 × 225 mm |
| Certification: | ATEX |
| Filtering ability: | 5 µm |
| Filter insert: | Replacement insert 5 µm (FV-1F) |
| Medium: | Compressed air |
| Vessel volume: | 28 cm3 |
| Condensate discharge: | Semi-automatic, Automatic |
| Working temperature: | -10 / 50 °C |
| Flow: | 2000 l/min |
| Regulatory range: | 0.5 - 8 bar |
| Pressure gauge range: | 0 - 10 bar |
| Included in delivery: | Manometer |
| Thread: | G 1/4" |
| Thread for manometer: | 1/4" |
Product rating
Be the first who will post an article to this item!
Discussion
Be the first who will post an article to this item!
From the basement to the worldThe German company KNOCKS FLUID Technik was founded as a family business in 1970. The company, which in its early days was run by its founder in the basement of his house, has grown into one of the leaders in the compressed air industry in less than 50 years. But the company continues to keep pace, and year after year its ranks have grown, while the development of new technologies has not been overlooked. But it wasn't just the desire for expansion, but also the desire for excellence that kept the company going. In 2004, the certification according to ISO 9001: 2000 came quite logically. The complete production of the entire product range is carried out at the company's headquarters in Selm, where, for example, proportional regulators, various types of couplings, pressure regulators, as well as silent blocks are produced. |
 |
 |
Modern technologies sanctify qualityFrom a one-man enterprise, it is now a company of 140 employees who are responsible for the quality of its products. This is helped by state-of-the-art tools and technologies such as production machines and QA systems, electronic test benches or 3D CAD systems. The KNOCKS brand is now an internationally sought-after brand with sales offices all over the world. Kompresory vzduchotechnika s.r.o. is one of them. A wide range of products from this popular brand can be found below. |