Filtration, regulation and treatment of compressed air, Page 2
-hankison-susicka-vzduch-kompresor-tllak-kondenzace-rosny-bod.jpg)
Product sorting
List of products
Stainless steel cyclone separator IHP2 with 1" threaded connection. It enables inexpensive and efficient removal of water and impurities from compressed air. Working pressure...
Stainless steel cyclone separator IHP4 with 1" threaded connection. It enables inexpensive and efficient removal of water and impurities from compressed air. Working pressure...
Stainless steel cyclone separator IHP1 with 1" threaded connection. It enables inexpensive and efficient removal of water and impurities from compressed air. Working pressure...
Cyclone separator CHP2 with 1" threaded connection. It enables inexpensive and efficient removal of water and impurities from compressed air. Working pressure 250 bar, working...
Adsorption filter with activated carbon AAFA2 in 1" version for absorption of residual oil, oil vapours and aerosols with < 0,005 mg/m3 from compressed air according to ISO...
Dry separation TAC-110 designed for separation of oil vapours from compressed air by activated carbon from the compressor up to a flow rate of 1 833 l/min at a maximum pressure...
Dry separation TAC-150 designed for separation of oil vapours from compressed air by activated carbon from the compressor up to a flow rate of 2 500 l/min at a maximum pressure...
The TAC-200 dry separator is designed to separate oil vapours from compressed air using activated carbon from the compressor up to a flow rate of 3,333 l/min at a maximum...
PFM microfilter with G1" connection thread for use in areas with high corrosive environments. Filtration capacity up to 0.1 um. Maximum working pressure is 16 bar, maximum flow...
Filter insert for PVACM vacuum microfilter designed to protect vacuum pumps and vacuum pumps from solid impurities. Filtration capacity up to 0.01 um. Working pressure 20 to...
Filter insert for PVACM vacuum microfilter designed to protect vacuum pumps and vacuum pumps from solid impurities. Filtration capacity up to 0.01 um. Working pressure 20 to...
Removes mechanical dirt up to 0.01 um and oil according to ISO 8573-1 class 1. Connection by internal pipe threads 1". The design allows a flow rate of up to 3400 l/min. Special...
CHP1A activated carbon filter with G1" connection thread designed for effective removal of solid impurities, oil, water and other impurities from compressed air up to 0.005 um....
CHP2A activated carbon filter with G1" connection thread designed for effective removal of solid impurities, oil, water and other impurities from compressed air up to 0.005 um....
CHP4A activated carbon filter with G1" connection thread designed to effectively remove solid impurities, oil, water and other impurities from compressed air up to 0.005 um....
HFPA activated carbon filter with G1" connection thread for use in areas with high corrosive environments. Filtration capacity up to 0.01 um. Maximum working pressure up to 50...
Adsorption filter with activated carbon for compressed air from Hankison NGF series type CF according to ISO. Filter size F08 with 1" female thread connection. The filter is not...
The ADRY-150 Series Adsorption Dryer was designed for continuous separation of water vapor from compressed air at flow rates up to 2,500 l/min. Reduces the pressure dew point...
The ADRY-200 Series Adsorption Dryer was designed for continuous separation of water vapor from compressed air at flow rates up to 3,333 l/min. Reduces the pressure dew point...
The AFA2-60V filter cartridge provides superior breathable air treatment. Filtration provided through activated carbon. Working pressure up to 16 bar, maximum flow 5583 l/min.
The AFA2-33V filter cartridge provides superior breathable air treatment. Filtration provided through activated carbon. Working pressure up to 16 bar, maximum flow 3300 l/min.
Condensing compressed air dryer for dew point +5°C. The maximum inlet pressure is 13 bar with a flow rate of up to 180 m³/hr (3,000 l/min) and connection via a G 1" male thread....
Condensing compressed air dryer for dew point +5°C. The maximum inlet pressure is 13 bar with a flow rate of up to 235 m³/hr (3 916 l/min) and connection via a G 1" male thread....
Condensation dryer for compressed air to +3°C dew point. Maximum input pressure is 14 bar with a flow rate of up to 75 m³/hr (1,250 l/min) and connection via external thread...
Removes mechanical contaminants up to 3 um in size according to ISO 8573-1 class 6. Connection by internal pipe threads 1". The design allows flow rates up to 3400 l/min....
CHP1P basic filter with G1" connection thread designed for effective removal of solid impurities, oil, water and other impurities from compressed air up to 3 um. Maximum working...
CHP4P basic filter with G1" connection thread designed to effectively remove solid impurities, oil, water and other impurities from compressed air up to 3 um. Maximum working...
Basic stainless steel filter IHP1N5 with G1" connection thread for effective removal of solid impurities, oil, water and other impurities from compressed air up to 5 um. Maximum...
Basic stainless steel filter IHP2N5 with G1" connection thread for effective removal of solid impurities, oil, water and other impurities from compressed air up to 5 um. Maximum...
Basic stainless steel filter IHP4N5 with G1" connection thread designed to effectively remove solid impurities, oil, water and other impurities from compressed air up to 5 um....
Catalytic filters (hopcalite) AAFH2 in 1" design for removal of CO andCO2 to breathable air level according to ISO 8573-1 class 1. Body with easily removable container and...
Removes the coarsest mechanical dirt up to 15 um in size according to ISO 8573-1 class 7. Connection by internal pipe threads 1". The design allows flow rates up to 3400 l/min....
Cyclone separator CHP4 with 1" threaded connection. It enables inexpensive and efficient removal of water and impurities from compressed air. Working pressure 400 bar, working...
Dry separation TAC-250 designed for separation of oil vapours from compressed air by activated carbon from the compressor up to a flow rate of 5 333 l/min at a maximum pressure...
The TACM-150 small dry separator is designed for separation of oil vapours from compressed air using activated carbon from the compressor up to a flow rate of 2,500 l/min at a...
The TACM-200 small dry separator is designed to separate oil vapours from compressed air using activated carbon from the compressor up to a flow rate of 3,333 l/min at a maximum...
Removes mechanical contaminants up to 1 um in size according to ISO 8573-1 class 3. Connection by internal pipe threads 1". The design allows a flow rate of up to 3400 l/min....
Dust filter CHP1R with G1" connection thread designed for effective removal of dust, oil, water and other impurities from compressed air up to 1 um. Maximum working pressure up...
Dust filter CHP2R with G1" connection thread designed for effective removal of dust, oil, water and other impurities from compressed air up to 1 um. Maximum working pressure up...
Dust filter CHP4R with G1" connection thread designed to effectively remove dust, oil, water and other impurities from compressed air up to 1 um. Maximum working pressure up to...