Compressed air treatment: filtration, drying and pressure regulation, Page 26
-
Treatment units
-
Industrial filtration
-
Air dryers
-
Pressure regulators
-
Cyclone separators
-
Oil-water separators
-
Pressure boosters
Bestsellers
Product sorting
List of products
With a G 2" thread and a flow of 16,667 l/min at 7 bar, the AAFP-1000 basic filter traps solid contaminants and dust particles larger than 3 µm. Working pressure up to 16 bar.
With a G 2" thread and a flow of 25,000 l/min at 7 bar, the AAFP-1500 basic filter traps solid contaminants and dust particles larger than 3 µm. Working pressure up to 16 bar.
WALTER WDF-100 refrigeration dryer for compressed air with a built-in 1 µm pre-filter and 0.01 µm fine filter. Pressure dew point +3 °C (water class 4), flow rate 100 m³/h...
Replacement polycarbonate lubricator bowl for A2 units with a 1/2" thread: lubricator A2L-12 and air treatment unit A2U-12.
Spare element AAFS-1500V for microfilters AAFS-1500 and AAFS-1680. Recommended replacement every 12 months or 4,000 operating hours.
Spare element AAFS-2760V for microfilter AAFS-2760. Recommended replacement every 12 months or 4,000 operating hours.
Seal kit for the DRV225-10 pressure reducing valve – version DRV 225, size G 1".for valve DRV225-10 (DRV 225 G 1")each version and size has its own kitreplacement of worn seals
A replacement sintered 5 µm filter element for FUTURA filters and filter regulators, and also for the filters in units. The element gradually clogs. Replace it when the pressure...
With a G 3/4" thread and a flow of 2,000 l/min at 7 bar, the AAFR-120 dust filter traps smaller solid contaminants and dust particles larger than 1 µm. Working pressure up to 16...
With a G 3/8" thread and a flow of 500 l/min at 7 bar, the AAFR-30 dust filter traps smaller solid contaminants and dust particles larger than 1 µm. Working pressure up to 16 bar.
With a G 1/4" thread and a flow of 583 l/min at 7 bar, the AAFR-35 dust filter traps smaller solid contaminants and dust particles larger than 1 µm. Working pressure up to 16 bar.
Two-piece B2 compressed air treatment unit with a G 1" thread: pressure regulator with 20 µm filter and lubricator. Inlet pressure up to 18 bar, setting 0 to 12 bar, flow 4600...
Manifold module B2T-3 in size 3 for B2 units with 3/4" and 1" threads: four G 1/2" branch ports, dimensions 30 × 80 × 80 mm. It takes air from within the assembly, for example...
With a G 1/4" thread and a flow of 583 l/min at 7 bar, the AAFA-35 activated carbon filter removes residual oil, oil vapours, hydrocarbons and odours; residual oil is below...
Spare element PFI1-200V for PF, HPF, WFIT, WFIF, WFIW, WHFIT and SPF sintered pre-filters of size 200 — sintered stainless steel 1.4404. Replace it at least once every 12...
Metal B2 compressed air lubricator (air line oiler) with a G 3/8" thread, inlet pressure up to 18 bar and a flow of 4500 l/min. The oil dose is set with the screw on top;...
With a G 3/8" thread and a flow of 500 l/min at 7 bar, the AAFS-30 microfilter traps particles larger than 0.01 µm, water and oil; residual oil is below 0.01 mg/m³. Working...
With a G 2" thread and a flow of 16,667 l/min at 7 bar, the AAFM-1000 fine pre-filter traps fine solid particles larger than 0.1 µm, water and oil; residual oil is below 0.1...
With a G 1/4" thread and a flow of 583 l/min at 7 bar, the AAFP-35 basic filter traps solid contaminants and dust particles larger than 3 µm. Working pressure up to 16 bar.
With a G 2" thread and a flow of 16,667 l/min at 7 bar, the AAFA-1000 activated carbon filter removes residual oil, oil vapours, hydrocarbons and odours; residual oil is below...
With a G 1" thread and a flow of 3,300 l/min at 7 bar, the AAFA-198 activated carbon filter removes residual oil, oil vapours, hydrocarbons and odours; residual oil is below...
With a G 1" thread and a flow of 5,583 l/min at 7 bar, the AAFA-335 activated carbon filter removes residual oil, oil vapours, hydrocarbons and odours; residual oil is below...
With a G 1 1/2" thread and a flow of 8,500 l/min at 7 bar, the AAFA-510 activated carbon filter removes residual oil, oil vapours, hydrocarbons and odours; residual oil is below...
With a G 1 1/2" thread and a flow of 13,000 l/min at 7 bar, the AAFA-780 activated carbon filter removes residual oil, oil vapours, hydrocarbons and odours; residual oil is...
The TD16MR timed drain with a solenoid valve opens at a set interval (0.5–45 min) for a set time (0–10 s). Stainless steel body, 230 V AC, up to 16 bar.
With a G 2" thread and a flow of 16,667 l/min at 7 bar, the AAFR-1000 dust filter traps smaller solid contaminants and dust particles larger than 1 µm. Working pressure up to 16...
With a G 2" thread and a flow of 25,000 l/min at 7 bar, the AAFR-1500 dust filter traps smaller solid contaminants and dust particles larger than 1 µm. Working pressure up to 16...
With a G 1" thread and a flow of 3,300 l/min at 7 bar, the AAFR-198 dust filter traps smaller solid contaminants and dust particles larger than 1 µm. Working pressure up to 16 bar.
With a G 1" thread and a flow of 5,583 l/min at 7 bar, the AAFR-335 dust filter traps smaller solid contaminants and dust particles larger than 1 µm. Working pressure up to 16 bar.
With a G 1 1/2" thread and a flow of 8,500 l/min at 7 bar, the AAFR-510 dust filter traps smaller solid contaminants and dust particles larger than 1 µm. Working pressure up to...
With a G 2" thread and a flow of 25,000 l/min at 7 bar, the AAFM-1500 fine pre-filter traps fine solid particles larger than 0.1 µm, water and oil; residual oil is below 0.1...
With a G 2 1/2" thread and a flow of 28,000 l/min at 7 bar, the AAFM-1680 fine pre-filter traps fine solid particles larger than 0.1 µm, water and oil; residual oil is below 0.1...
With a G 1" thread and a flow of 5,583 l/min at 7 bar, the AAFM-335 fine pre-filter traps fine solid particles larger than 0.1 µm, water and oil; residual oil is below 0.1...
With a G 1 1/2" thread and a flow of 13,000 l/min at 7 bar, the AAFM-780 fine pre-filter traps fine solid particles larger than 0.1 µm, water and oil; residual oil is below 0.1...
Metal B2 compressed air filter with a G 3/8" thread and 20 µm filtration for pressure up to 18 bar. Flow 4300 l/min, manual condensate drain that can be replaced with the B2FD...
A replacement double polycarbonate bowl for a size 1 COMBIBLOC unit: 25 cm³ filter bowl, inner 75 cm³ lubricator bowl, manual condensate drain. A replacement for a damaged or...
A 5 µm sintered bronze filter element for a size 2 COMBIBLOC unit — finer than the 40 µm element fitted as standard. It suits places where you need cleaner air, for example...
EWO diaphragm pressure regulator with a brass body and secondary venting for compressed air and neutral gases.connection G 1 1/2"control range 0.5–16 bar, inlet pressure up to...
EWO diaphragm pressure regulator with a brass body and secondary venting for compressed air and neutral gases.connection G 1 1/4" (reduced inlet and outlet)control range 0.5–25...