Compressed air treatment: filtration, drying and pressure regulation, Page 27
-
Treatment units
-
Industrial filtration
-
Air dryers
-
Pressure regulators
-
Cyclone separators
-
Oil-water separators
-
Pressure boosters
Bestsellers
Product sorting
List of products
EWO diaphragm pressure regulator with a brass body and secondary venting for compressed air and neutral gases.connection G 1 1/4" (reduced inlet and outlet)control range 0.5–3...
With a G 3/4" thread and a flow of 2,000 l/min at 7 bar, the AAFS-120 microfilter traps particles larger than 0.01 µm, water and oil; residual oil is below 0.01 mg/m³. Working...
With a G 1/4" thread and a flow of 417 l/min at 7 bar, the AAFS-25 microfilter traps particles larger than 0.01 µm, water and oil; residual oil is below 0.01 mg/m³. Working...
Metal B2 compressed air lubricator (air line oiler) with a G 1" thread, inlet pressure up to 18 bar and a flow of 16000 l/min. The oil dose is set with the screw on top; painted...
Connection kit B2CK-1 for two components of B2 air treatment units in size 1 with 1/4" threads: two screws and a sealing ring. It joins a filter, regulator, lubricator or...
EWO piston pressure regulator with secondary venting for compressed air and neutral gases with inlet pressure up to 60 bar.connection G 3/8"control range 1–20 bar, inlet...
Finer filter element VFK35 5 µm made of sintered bronze for metal I8 units with thread 3/4" and 1": FWA34, FWA10.
Mounting bracket by KNOCKS for fixing pressure regulators DR 11 and DR 12 (size BG 1) to a wall, column or machine frame.for regulators DR 11 and DR 12 (size BG 1)fixing the...
Stainless steel mounting bracket by KNOCKS for precision regulators FDR-2, FDR-3 and FDR-5.for precision regulators FDR-2, FDR-3 and FDR-5stainless steelincluding two M5 × 10...
DRPE proportional pressure regulator: you set the outlet pressure by a 4–20 mA electrical signal from the control system.control range 0–10 bar, inlet pressure max. 13.8...
WALTER WDF-155 refrigeration dryer for compressed air with a built-in 1 µm pre-filter and 0.01 µm fine filter. Pressure dew point +3 °C (water class 4), flow rate 155 m³/h...
With a G 2" thread and a flow of 16,667 l/min at 7 bar, the AAFS-1000 microfilter traps particles larger than 0.01 µm, water and oil; residual oil is below 0.01 mg/m³. Working...
With a G 2" thread and a flow of 25,000 l/min at 7 bar, the AAFS-1500 microfilter traps particles larger than 0.01 µm, water and oil; residual oil is below 0.01 mg/m³. Working...
With a G 2 1/2" thread and a flow of 28,000 l/min at 7 bar, the AAFS-1680 microfilter traps particles larger than 0.01 µm, water and oil; residual oil is below 0.01 mg/m³....
With a G 1" thread and a flow of 5,583 l/min at 7 bar, the AAFS-335 microfilter traps particles larger than 0.01 µm, water and oil; residual oil is below 0.01 mg/m³. Working...
With a G 1 1/2" thread and a flow of 8,500 l/min at 7 bar, the AAFS-510 microfilter traps particles larger than 0.01 µm, water and oil; residual oil is below 0.01 mg/m³. Working...
With a G 1 1/2" thread and a flow of 13,000 l/min at 7 bar, the AAFS-780 microfilter traps particles larger than 0.01 µm, water and oil; residual oil is below 0.01 mg/m³....
High-flow silencer with external pipe thread G 1 1/4" designed especially for compressed air expansion during regeneration and ventilation of production columns of adsorption...
ABAC DRY-45 refrigeration dryer for compressed air with a pressure dew point of +4 °C. Flow rate 36 m³/h (600 l/min) at 7 bar, working pressure up to 16 bar, connection G 3/4"...
ABAC DRY-85 refrigeration dryer for compressed air with a pressure dew point of +4 °C. Flow rate 72 m³/h (1,200 l/min) at 7 bar, working pressure up to 16 bar, connection G 3/4"...
Desiccant dryer ADRY-105 for 105 Nm³/h (1,750 l/min) of compressed air, G 3/4" connection. Pressure dew point −40 °C, working pressure 4 to 16 bar, inlet microfilter and outlet...
Desiccant dryer ADRY-150 for 150 Nm³/h (2,500 l/min) of compressed air, G 1" connection. Pressure dew point −40 °C, working pressure 4 to 16 bar, inlet microfilter and outlet...
Sell-off (remaining stock). The RDP-35 dryer is the previous version (14 bar, R134a refrigerant, EMD12 drain). Its successor with the same flow rate is the RDS-35.Condensation...
SMC air tank, 5 l for 20 bar, for VBA series pressure boosters.for VBA10A and VBA11A pressure boostersmax. pressure 20 bar, 20 bar safety valve included⌀ 156 × 360 mm, carbon...
SMC air tank, 10 l for 20 bar, for VBA series pressure boosters.for VBA10A, VBA11A, VBA20A and VBA22A pressure boostersmax. pressure 20 bar, 20 bar safety valve included⌀ 180 ×...
SMC air tank, 20 l for 10 bar, for VBA series pressure boosters.for VBA20A, VBA22A and VBA40A pressure boostersmax. pressure 10 bar, 10 bar safety valve included⌀ 206 × 696 mm,...
SMC air tank, 38 l for 10 bar, for VBA series pressure boosters.for VBA20A, VBA22A and VBA40A pressure boostersmax. pressure 10 bar, 10 bar safety valve included⌀ 256 × 846 mm,...
A manual condensate drain with a special G 1/8" mounting, for pressure up to 25 bar. It serves as a replacement for a damaged drain.
The connection kit with bracket joins two FUTURA components of the same size and at the same time fixes the unit to a wall. For an assembly of three to four components, two kits...
GCE ProControl cylinder pressure regulator for acetylene, according to ISO 2503.cylinder pressure 25 bar, connection clampoutlet pressure 0–1.5 bar, outlet G 3/8" LH maletwo...
GCE ProControl cylinder pressure regulator for air, according to ISO 2503.cylinder pressure 200 bar, connection G 5/8" maleoutlet pressure 0–10 bar, outlet G 1/4" maletwo...
GCE ProControl cylinder pressure regulator for air, according to ISO 2503.cylinder pressure 200 bar, connection G 5/8" maleoutlet pressure 0–20 bar, outlet G 1/4" maletwo...
GCE ProControl cylinder pressure regulator for air, according to ISO 2503.cylinder pressure 300 bar, connection W 30 × 2 female (⌀ 16.6/19.4)outlet pressure 0–10 bar, outlet G...
GCE ProControl cylinder pressure regulator for argon and carbon dioxide (CO₂), according to ISO 2503.cylinder pressure 200 bar, connection W 21.8 × 1/14" femaleflow rate 0–30...
GCE ProControl cylinder pressure regulator for argon and carbon dioxide (CO₂), according to ISO 2503.cylinder pressure 200 bar, connection W 21.8 × 1/14" femaleflow rate 0–24...
GCE ProControl cylinder pressure regulator for carbon dioxide (CO₂), helium and argon, according to ISO 2503.cylinder pressure 200 bar, connection W 21.8 × 1/14" femaleoutlet...
GCE ProControl cylinder pressure regulator for carbon dioxide (CO₂), helium and argon, according to ISO 2503.cylinder pressure 200 bar, connection W 21.8 × 1/14" femaleoutlet...
GCE ProControl cylinder pressure regulator for forming gas, according to ISO 2503.cylinder pressure 200 bar, connection W 21.8 × 1/14" LH femaleflow rate 0–50 l/min, outlet G...
GCE ProControl cylinder pressure regulator for hydrogen, methane, natural gas and town gas, according to ISO 2503.cylinder pressure 200 bar, connection W 21.8 × 1/14" LH...
GCE ProControl cylinder pressure regulator for hydrogen, methane, natural gas and town gas, according to ISO 2503.cylinder pressure 200 bar, connection W 21.8 × 1/14" LH...