Compressed air treatment: filtration, drying and pressure regulation, Page 35
-
Treatment units
-
Industrial filtration
-
Air dryers
-
Pressure regulators
-
Cyclone separators
-
Oil-water separators
-
Pressure boosters
Bestsellers
Product sorting
List of products
Service kit ADRY-TAC-105-4R for maintaining the ADRY-TAC-105 desiccant dryer with activated carbon tower after 4 years of operation. It contains filter elements, silencers,...
Service kit ADRY-B-60-1R for maintaining the ADRY-BM-60 desiccant dryer for breathing air after 1 year of operation. It contains filter elements, silencers and desiccant.
Service kit ADRY-B-75-1R for maintaining the ADRY-BM-75 desiccant dryer for breathing air after 1 year of operation. It contains filter elements, silencers and desiccant.
Service kit ADRY-B-60-2R for maintaining the ADRY-BM-60 desiccant dryer for breathing air after 2 years of operation. It contains filter elements, silencers, non-return valve,...
Service kit ADRY-B-75-2R for maintaining the ADRY-BM-75 desiccant dryer for breathing air after 2 years of operation. It contains filter elements, silencers, non-return valve,...
Service kit ADRY-B-36-4R for maintaining the ADRY-BM-36 desiccant dryer for breathing air after 4 years of operation. It contains filter elements, silencers, valve set,...
Service kit ADRY-TAC-60-4R for maintaining the ADRY-TAC-60 desiccant dryer with activated carbon tower after 4 years of operation. It contains filter elements, silencers, valve...
Service kit ADRY-TAC-75-4R for maintaining the ADRY-TAC-75 desiccant dryer with activated carbon tower after 4 years of operation. It contains filter elements, silencers, valve...
Desiccant dryer ADRY-TAC-06 with activated carbon tower for 6 Nm³/h (100 l/min), G 3/8" connection. Pressure dew point −40 °C, removal of oil vapours and odours, working...
Desiccant dryer ADRY-TAC-12 with activated carbon tower for 12 Nm³/h (200 l/min), G 3/8" connection. Pressure dew point −40 °C, removal of oil vapours and odours, working...
Desiccant dryer ADRY-TAC-24 with activated carbon tower for 24 Nm³/h (400 l/min), G 3/8" connection. Pressure dew point −40 °C, removal of oil vapours and odours, working...
Pressure regulator of the 417 series by EWO for high flow rates up to 25,000 l/min and inlet pressure up to 40 bar, in a lockable version: the set pressure can be locked so that...
Pressure regulator of the 417 series by EWO for high flow rates up to 25,000 l/min and inlet pressure up to 40 bar, in a lockable version: the set pressure can be locked so that...
AirCom proportional pressure regulator of the DRPA series with digital control: you set the outlet pressure by a 4–20 mA electrical signal.control range 0–10 bar, inlet pressure...
FDRY-3570-VA valve and actuator service kit for the FDRY-3750 and FDRY-5000 desiccant dryers. Genuine part from the manufacturer Omega Air.
FDRY-6500-VA valve and actuator service kit for the FDRY-6500 desiccant dryer. Genuine part from the manufacturer Omega Air.
Omega Air RDS-300 refrigeration dryer for compressed air with a pressure dew point of +3 °C (water class 4). Flow rate 300 m³/h (5,000 l/min) at 7 bar, working pressure up to 16...
Sell-off (remaining stock). The RDP-180 dryer is the previous version (14 bar, R134a refrigerant, EMD12 drain). Its successor with the same flow rate is the RDS-180.Condensation...
Sell-off (remaining stock). The RDP-380 dryer is the previous version (14 bar, R134a refrigerant, EMD12 drain). Its successor with the same flow rate is the RDS-380.Condensation...
Sell-off (remaining stock). The RDP-235 dryer is the previous version (14 bar, R134a refrigerant, EMD12 drain). Its successor with the same flow rate is the RDS-235.Refrigerated...
3/2 valve FUTURA MCL12-F230VAC, size 2: G 1/2" thread, flow 4,300 l/min, 230 V AC coil, inlet pressure up to 10 bar.
EWO diaphragm pressure regulator with secondary venting for compressed air and neutral gases.connection G 1"control range 0.5–10 bar, inlet pressure up to 25 barflow rate 5,330...
Spare element AAFM-780V for fine pre-filter AAFM-780. Recommended replacement every 12 months or 4,000 operating hours.
Parts for joining the filters and 2 brackets for wall mounting, for 3 AAF filters, sizes 25 and 30.
Sell-off (remaining stock). The RDP-300 dryer is the previous version (14 bar, R134a refrigerant, EMD12 drain). Its successor with the same flow rate is the RDS-300.Refrigerant...
Service kit ADRY-6-1R for maintaining ADRY-6 to ADRY-36 desiccant dryers after 1 year of operation. It contains filter elements and silencers.
Soft-start valve FUTURA BF38-F, size 1: G 3/8" thread, flow 2,000 l/min, inlet pressure up to 16 bar, for ATEX environments.
WALTER WDF-210 refrigeration dryer for compressed air with a built-in 1 µm pre-filter and 0.01 µm fine filter. Pressure dew point +3 °C (water class 4), flow rate 210 m³/h...
Spare element AAFS-780V for microfilter AAFS-780. Recommended replacement every 12 months or 4,000 operating hours.
Spare element AAFR-120V for dust filter AAFR-120. Recommended replacement every 12 months or 4,000 operating hours.
ABAC DRY-360 refrigeration dryer for compressed air with a pressure dew point of +4 °C. Flow rate 312 m³/h (5,200 l/min) at 7 bar, working pressure up to 14 bar, connection G 1...
ABAC DRY-250 refrigeration dryer for compressed air with a pressure dew point of +4 °C. Flow rate 216 m³/h (3,600 l/min) at 7 bar, working pressure up to 14 bar, connection G 1...
ABAC DRY-290 refrigeration dryer for compressed air with a pressure dew point of +4 °C. Flow rate 246 m³/h (4,100 l/min) at 7 bar, working pressure up to 14 bar, connection G 1...
Spare element AAFR-198V for dust filter AAFR-198. Recommended replacement every 12 months or 4,000 operating hours.
Refrigeration dryer for compressed air Omega Air RDL-380 for a pressure dew point of +5 °C (water class 5). Flow rate 380 m³/h (6,333 l/min) at 7 bar, working pressure up to 13...
Refrigeration dryer for compressed air Omega Air RDL-480 for a pressure dew point of +5 °C (water class 5). Flow rate 480 m³/h (8,000 l/min) at 7 bar, working pressure up to 13...