Compressed air filtration pressure 16 to 64 bar, Page 4
Product sorting
List of products
AAFR dust filter in 3/8" design to remove dust impurities up to 1 um from compressed air according to ISO 8573-1 class 3. Body with easily removable container and designed for a...
AAFR dust filter in 3/8" design to remove dust impurities up to 1 um from compressed air according to ISO 8573-1 class 3. Body with easily removable container and designed for a...
The filters are used to remove the largest mechanical impurities from compressed air up to 1 um according to ISO 8573-1 class 3. Body with easily removable container and...
Electronic IEDs are primarily designed to drain condensed water from filter vessels. Equipped with LED indicator and test button. Operating temperature +1,5 °C to +65 °C,...
The BFM pre-filter insert is used to remove mechanical impurities and oil from the compressed air. Borosilicate microfibre insert with a filtration capacity of up to 0.1 μm....
AAFS 1 1/2" microfilter to remove micro impurities up to 0.01 um from compressed air according to ISO 8573-1 class 1. Body with easily removable container and designed for a...
AAFS 1 1/2" microfilter to remove micro impurities up to 0.01 um from compressed air according to ISO 8573-1 class 1. Body with easily removable container and designed for a...
AAFS 1" microfilter to remove micro impurities up to 0.01 um from compressed air according to ISO 8573-1 class 1. Body with easily removable container and designed for a flow...
AAFS 1" microfilter to remove micro impurities up to 0.01 um from compressed air according to ISO 8573-1 class 1. Body with easily removable container and designed for a flow...
AAFS 1/4" microfilter for removal of micro impurities up to 0.01 um from compressed air according to ISO 8573-1 class 1. Body with easily removable container and designed for a...
AAFS 2 1/2" microfilter for removal of micro impurities up to 0.01 um from compressed air according to ISO 8573-1 class 1. Body with easily removable container and designed for...
AAFS microfilter in 3" design to remove micro impurities up to 0.01 um from compressed air according to ISO 8573-1 class 1. Body with easily removable container and designed for...
AAFS microfilter in 3" design to remove micro impurities up to 0.01 um from compressed air according to ISO 8573-1 class 1. Body with easily removable container and designed for...
Microfilter AAFS in 1/2" design to remove micro impurities down to 0.01 um from compressed air according to ISO 8573-1 class 1. Body with easily removable bowl and designed for...
AAFS microfilter in 3/8" design to remove micro impurities up to 0.01 um from compressed air according to ISO 8573-1 class 1. Body with easily removable container and designed...
AAFS microfilter in 3/8" design to remove micro impurities up to 0.01 um from compressed air according to ISO 8573-1 class 1. Body with easily removable container and designed...
The AFS microfilter is used to remove the largest mechanical impurities from compressed air up to 0.01 um according to ISO 8573-1 class 1. Body with easily removable container...
AFM filters are used to remove the largest mechanical impurities from compressed air up to 0.1 um according to ISO 8573-1 class 2. Body with easily removable container and...
Replacement basic filter cartridge with 3 µm filtration capacity for OMEGA AIR AAFP-1500 and AAFP-1680. Recommended replacement 12 months or every 4,000 MH and when clogging of...
Replacement catalytic filters (hopcalite) for OMEGA AIR - AAFH2-198. Suitable for removing CO andCO2 to the level of breathable air from compressed air according to ISO 8573-1...
Replacement dust filter cartridge with 1 µm filtration capacity for OMEGA AIR AAFR-2160. Recommended replacement 12 months or every 4,000 MH and when clogging of the filter...
Replacement dust filter cartridge with 1 µm filtration capacity for OMEGA AIR AAFR-1000. Recommended replacement 12 months or every 4,000 MH and when clogging of the filter...
Replacement fine filter cartridge with 0.1 µm filtration capacity for OMEGA AIR AAFM-335 pre-filter. Recommended replacement 12 months or every 4,000 MH and when clogging of the...
Replacement microfilter cartridge with filtration capacity of 0.01 µm for OMEGA AIR AAFS-35 and AAFS-60 microfilters. Recommended replacement 12 months or every 4,000 MH and...
Replacement filter with activated carbon AAFA for OMEGA AIR AAFA-780. Absorption of residual oil, oil vapours and aerosols with a content of < 0.005 mg/m³ from compressed air...
Service kit for condensate evacuator IED for eelectronic IED triggers. The devices are primarily designed to drain condensed water from the filter vessels.
AAFC cyclone separator in 3" design with a flow rate of 36,000 l/min for partial removal of condensate from compressed air. Here the flow changes to rotational and due to the...
AAFC 2" cyclone separator with a flow rate of 25,000 l/min for partial removal of condensate from compressed air. Here the flow changes to rotational and due to the rotation and...
Replacement cyclone insert for liquid water filtration AAFC-1000V. Recommended replacement 12 months or every 4,000 MH and upon indication of clogging of the filter element by...
AAFM pre-filter in 1/4" design for removal of fine impurities up to 0.1 um from compressed air according to ISO 8573-1 class 2. Body with easily removable container and designed...
Replacement catalytic filters (hopcalite) for OMEGA AIR - AAFH2-78. Suitable for removing CO andCO2 to the level of breathable air from compressed air according to ISO 8573-1...
AAFS 2" microfilter for removal of micro impurities up to 0.01 um from compressed air according to ISO 8573-1 class 1. Body with easily removable container and designed for a...
Replacement fine filter cartridge with 0.1 µm filtration capacity for OMEGA AIR AAFM-1000 pre-filter. Recommended replacement 12 months or every 4,000 MH and when clogging of...
The IEDC electronic skimmers with alarm output for remote monitoring and with the possibility of service connection for obtaining operating data from the device are primarily...
AAFP basic filter in 3/4" design for removal of basic mechanical impurities up to 3 um from compressed air according to ISO 8573-1 class 6. Body with easily removable container...
Catalytic filters (hopcalite) AAFH2 in 1/2" design for removal of CO andCO2 to breathable air level according to ISO 8573-1 class 1. Body with easily removable container and...
The filters are used to remove the largest mechanical impurities from compressed air up to 15 um according to ISO 8573-1 class 7. Connection by flange with DN80 clearance....
Replacement filter with capsule and molecular sieve for OMEGA AIR - AAFH2-198. Designed as a fuse against moisture leakage into the air during shutdown of ISO 8573-1 class 1...
Replacement filter with capsule and molecular sieve for OMEGA AIR - AAFH2-335. Designed as a fuse against moisture leakage into the air during shutdown of ISO 8573-1 class 1...
Replacement filter with capsule and molecular sieve for OMEGA AIR - AAFH2-510. Designed as a fuse against moisture leakage into the air during shutdown of ISO 8573-1 class 1...