Manifold module FUTURA VBCL382-F - G 3/8" 7,250 l/min · size 2 · ATEX
Code: VBCL382-F
Related products
Product detailed description
The manifold module is a through-flow module without a valve. All side ports have the supply pressure, so you can take air from the unit at several points.
Specifications
| VBCL382-F — specifications | |
|---|---|
| Type | Manifold module |
| Connection | G 3/8" female thread |
| Size | 2 (module width 63 mm) |
| Inlet pressure | 0–16 bar |
| Flow | 7,250 l/min |
| Side ports | top G 1/4", bottom G 1/2", front and rear G 3/8" |
| Width × height | 63 × 81 mm |
| Material | glass-fibre reinforced polyamide body, NBR seals |
| Working temperature | −10 to +50 °C |
| Medium | lubricated or non-lubricated compressed air and neutral gases |
| Potentially explosive atmospheres | yes, zones 1, 2, 21 and 22, T4 |
What it is for
An oil-free branch is made with a manifold module before the lubricator, for example for a spray gun or blow-off. Size 2 is suitable for machines and larger air lines.
Parts for this size: mounting bracket W2F · connection kit KP2F · connection kit with wall bracket KPW2F · threaded wall brackets WK2-38F.
Potentially explosive atmospheres
A mechanical device with no ignition source of its own. According to the declaration regarding Directive 2014/34/EU, you can use it in zones 1 and 2 (gases IIA, IIB, IIC) and 21 and 22 (dust IIIA, IIIB), temperature class T4, under the conditions described for the FUTURA range. We will send you the declaration on request.
Ventilek’s tip
Same pressure as the supply. The manifold module does not change the pressure. After a regulator, the ports have the set pressure.
Additional parameters
| Category: | FUTURA soft-start valves, check valves and manifold modules for ATEX up to 16 bar |
|---|---|
| Version: | Manifold module |
| Pressure: | 16 bar |
| Dimensions: | 81 × 63 mm |
| Certification: | ATEX |
| Top exit: | 2 × 3/8" |
| Medium: | Compressed air |
| Working temperature: | -10 / 50 °C |
| Flow: | 7,250 l/min |
| Bottom exit: | 3/8" |
| Thread: | G 3/8" |
| In stock: | External warehouse |
Product rating
Be the first who will post an article to this item!
From the basement to the worldThe German company KNOCKS FLUID Technik was founded as a family business in 1970. The company, which in its early days was run by its founder in the basement of his house, has grown into one of the leaders in the compressed air industry in less than 50 years. But the company continues to keep pace, and year after year its ranks have grown, while the development of new technologies has not been overlooked. But it wasn't just the desire for expansion, but also the desire for excellence that kept the company going. In 2004, the certification according to ISO 9001: 2000 came quite logically. The complete production of the entire product range is carried out at the company's headquarters in Selm, where, for example, proportional regulators, various types of couplings, pressure regulators, as well as silent blocks are produced. |
 |
 |
Modern technologies sanctify qualityFrom a one-man enterprise, it is now a company of 140 employees who are responsible for the quality of its products. This is helped by state-of-the-art tools and technologies such as production machines and QA systems, electronic test benches or 3D CAD systems. The KNOCKS brand is now an internationally sought-after brand with sales offices all over the world. Kompresory vzduchotechnika s.r.o. is one of them. A wide range of products from this popular brand can be found below. |