PA12 Longlife polyamide tubing for compressed air

PA12 Longlife polyamide tubing is rigid plastic tubing for compressed air made to the requirements of DIN 73378 / 74324. It is designed for joints with extreme demands on tube service life and has excellent dimensional stability at higher temperatures.
It works from −40 to +80 °C, and the material hardness is 72 °Sh. The series has ten sizes from 4/2 to 12/10 mm and seven colours. The working pressure at 20 °C is 13 to 50 bar depending on the size.
Sizes, pressures and order codes
The size is given as outer / inner diameter in millimetres. The outer diameter must match the fitting. For the 4, 8 and 12 mm diameters you also choose the wall thickness: a thicker wall withstands higher pressure and bends into a smaller arc, a thinner one lets through more air. The picture shows all ten sizes to the same scale.

| PA12 Longlife tubing — sizes and colours | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Diameter D/d | Wall | Working pressure | Burst pressure | Bend radius | Weight | Azure | Blue | Clear | Black | Red | Yellow | Green |
| 4/2 mm | 1 mm | 50 bar | 150 bar | 15 mm | 10 g/m | PL42A | PL42B | PL42N | PL42S | PL42R | PL42Y | PL42G |
| 4/2.5 mm | 0.75 mm | 34 bar | 104 bar | 20 mm | 8 g/m | PL425A | PL425B | PL425N | PL425S | PL425R | PL425Y | PL425G |
| 4/2.7 mm | 0.65 mm | 29 bar | 87 bar | 20 mm | 7 g/m | PL427A | PL427B | PL427N | PL427S | PL427R | PL427Y | PL427G |
| 5/3 mm | 1 mm | 23 bar | 69 bar | 20 mm | 13 g/m | PL53A | PL53B | PL53N | PL53S | PL53R | PL53Y | PL53G |
| 6/4 mm | 1 mm | 30 bar | 90 bar | 30 mm | 16 g/m | PL64A | PL64B | PL64N | PL64S | PL64R | PL64Y | PL64G |
| 8/5 mm | 1.5 mm | 34 bar | 104 bar | 35 mm | 32 g/m | – | PL85B | PL85N | PL85S | – | – | – |
| 8/6 mm | 1 mm | 21 bar | 64 bar | 55 mm | 23 g/m | PL86A | PL86B | PL86N | PL86S | PL86R | PL86Y | PL86G |
| 10/8 mm | 1 mm | 16 bar | 50 bar | 85 mm | 30 g/m | PL108A | PL108B | PL108N | PL108S | PL108R | PL108Y | PL108G |
| 12/9 mm | 1.5 mm | 21 bar | 64 bar | 80 mm | 52 g/m | – | PL129B | PL129N | PL129S | PL129R | PL129Y | – |
| 12/10 mm | 1 mm | 13 bar | 40 bar | 120 mm | 36 g/m | PL1210A | PL1210B | PL1210N | PL1210S | PL1210R | PL1210Y | – |
A full roll is 100 m for all sizes. Some tubes are also sold by the metre, the others only as full rolls; you will find this in the specification table on each product page. The working pressure applies at 20 °C, and the burst pressure is roughly three times higher. The outer diameter tolerance is ±0.07 mm up to 10 mm and ±0.1 mm for 12 mm, the wall thickness tolerance ±0.07 mm.
#showmore#
Thicker wall, higher pressure

The working pressure depends on the ratio of wall to diameter. The highest pressure of 50 bar is withstood by the thin 4/2 mm tube with a 1 mm wall, the lowest of 13 bar by the large 12/10 mm.
The same outer diameter can offer a different reserve. The 8/5 mm tube with a 1.5 mm wall withstands 34 bar, the thin-walled 8/6 mm 21 bar. For 12 mm it is 21 bar for 12/9 mm and 13 bar for 12/10 mm.
Which wall to choose
For three diameters the series offers several wall thicknesses. The fitting is the same for all of them; what differs is pressure, flow and the smallest bend.

4 mm: three walls
The 4/2 mm tube withstands 50 bar and bends to a radius of 15 mm. The 4/2.5 and 4/2.7 mm versions have more flow and pressures of 34 and 29 bar. More 4 mm tubes are compared in the overview 4 mm tubing.

8 mm: 8/5 or 8/6
The thick-walled 8/5 mm withstands 34 bar and a 35 mm bend. The thin-walled 8/6 mm lets through more air but has 21 bar and needs a bend of at least 55 mm. Other materials are shown in the overview 8 mm tubing.

12 mm: 12/9 or 12/10
The 12/9 mm tube withstands 21 bar with a bend radius of 80 mm. The 12/10 mm version has the highest flow in the series, but only 13 bar and a 120 mm bend. Other materials are in the overview 12 mm tubing.
Working pressure by temperature
The pressures given apply at 20 °C. As the temperature rises, polyamide softens and the working pressure drops: to 72 % at 40 °C, to 55 % at 60 °C and to 45 % at 80 °C. A 6/4 mm tube with a working pressure of 30 bar therefore withstands 13.5 bar at 80 °C.

| Temperature | Share of pressure | Example 6/4 mm | Example 12/10 mm |
|---|---|---|---|
| 20 °C | 100 % | 30 bar | 13 bar |
| 40 °C | 72 % | 21.6 bar | 9.4 bar |
| 60 °C | 55 % | 16.5 bar | 7.2 bar |
| 80 °C | 45 % | 13.5 bar | 5.9 bar |
With large diameters, watch the temperature: the 12/10 mm tube has a working pressure of only 5.9 bar at 80 °C. Do not use these tubes above +80 °C; for temperatures up to +260 °C there is PTFE Teflon tubing.
Seven colours to tell circuits apart
The colour does not change the properties of the tube; pressure, temperature and bend radius are the same for all colours. It does help to tell branches apart on the machine and shortens the search during repairs. Not every size comes in all colours: 8/5 mm is only blue, clear and black, green ends at 10/8 mm, and azure has no 8/5 or 12/9 mm.
Fittings, cutters and routing
Cut the rigid tube square with sharp cutters so the cut is straight, and push it into the fitting as far as it will go. When routing, keep the minimum bend radius from the table. With the thin-walled 8/6 and 12/10 mm sizes the bend is large, 55 and 120 mm.

Plastic push-in fittings
Straight, T, L, Y and threaded versions for outer diameters of 4, 6, 8, 10 and 12 mm.
View
Brass push-in fittings
More robust metal fittings for outer diameters from 4 to 12 mm, including the 5/3 mm tube.
View
Compression fittings with union nut
A firm joint for the exact tube size 4/2.5, 5/3, 6/4, 8/6, 10/8 and 12/10 mm.
View
Tube cutters
A square cut without burrs, so the fitting seals all the way round.
ViewWhen to choose a different tube

Moving machine parts
Where the tube bends constantly with the machine’s movement, the soft polyurethane series is better: PUJ.

More flexible polyamide
When you need polyamide with greater flexibility, choose the series PA12 Extraflex.

Air brakes
For air brake systems of trucks and commercial vehicles, there is the series PA12 for air brakes.
Ventilek’s tip
With PA12 Longlife, choose the wall, not just the diameter. A thicker wall gives higher pressure and a smaller bend, a thinner one more air. And above +80 °C, go for another material.
- What does the Longlife designation mean?
- The tubes are made to the requirements of DIN 73378 / 74324 and are designed for joints with extreme demands on service life. They have excellent dimensional stability at higher temperatures.
- What pressure does a PA12 Longlife tube withstand?
- It depends on the size. At 20 °C the working pressure ranges from 13 bar for 12/10 mm to 50 bar for 4/2 mm, and the burst pressure is roughly three times higher. The pressure drops with temperature, to 45 % at 80 °C.
- Why are there several versions with the same outer diameter?
- They differ in wall thickness. A thicker wall withstands higher pressure and bends into a smaller arc, while a thinner one has a larger inner diameter and lets through more air. The fitting is chosen by the outer diameter.
- How tightly can the tube be bent?
- The minimum bend radius for each size is in the table, from 15 mm for 4/2 mm to 120 mm for 12/10 mm. A smaller bend kinks the tube and restricts the flow.
- Do you also sell shorter lengths than a full roll?
- For some sizes and colours, yes; those are sold by the metre. The others are supplied only as full rolls of 100 m. For a specific tube, see the specification table on its product page.
Data from the series catalogue sheet (page 464): working and burst pressure at 20 °C, bend radius, weight and roll length for each size, working temperature −40 to +80 °C, hardness 72 °Sh, pressure drop with temperature and tolerances. Standards DIN 73378 / 74324.
Product sorting
List of products
Clear PA12 Longlife polyamide tube 12/10 mm, also sold by the metre. Working pressure 13 bar, the highest flow in the series.
Blue PA12 Longlife polyamide tube 6/4 mm for pneumatic valves and cylinders. Working pressure 30 bar, also sold by the metre.
Clear PA12 Longlife polyamide tube 8/6 mm for higher flow, also sold by the metre. Working pressure 21 bar.
Clear thin-walled PA12 Longlife tube 4/2.7 mm. Working pressure 29 bar, also sold by the metre, and you can see condensate in it.
Clear PA12 Longlife polyamide tube 10/8 mm, also sold by the metre. Working pressure 16 bar, and you can see condensate in the clear wall.
Azure PA12 Longlife polyamide tube 4/2 mm with a 1 mm wall and a working pressure of 50 bar, the highest in the whole series. The light blue colour sets a second circuit apart...
Blue PA12 Longlife tube 8/5 mm with a thick 1.5 mm wall. Working pressure 34 bar, higher than for the 6 mm tube.
Clear PA12 Longlife polyamide tube 4/2.5 mm, also sold by the metre. Working pressure 34 bar, and you can see condensate through the wall.
Blue PA12 Longlife polyamide tube 10/8 mm, also sold by the metre. Working pressure 16 bar, burst pressure 50 bar.
Clear PA12 Longlife polyamide tube 6/4 mm. Working pressure 30 bar, you can see condensate in it, also sold by the metre.
Blue PA12 Longlife polyamide tube 8/6 mm with a large inner diameter. Working pressure 21 bar, burst pressure 64 bar.
Clear PA12 Longlife polyamide tube 4/2 mm in which you can see condensate droplets. Working pressure 50 bar, also sold by the metre.
Green thin-walled PA12 Longlife polyamide tube 4/2.7 mm. Working pressure 29 bar, bend radius 20 mm.
Azure PA12 Longlife polyamide tube 4/2.7 mm with the thinnest wall in the series. Working pressure 29 bar and the highest flow among the 4 mm tubes.
Blue PA12 Longlife polyamide tube 12/10 mm, also sold by the metre. The largest inner diameter in the series, working pressure 13 bar.
Black PA12 Longlife polyamide tube 12/10 mm, also sold by the metre. Working pressure 13 bar, weight 36 g/m.
Blue thick-walled PA12 Longlife polyamide tube 12/9 mm. Working pressure 21 bar, bend radius 80 mm.
Azure PA12 Longlife polyamide tube 8/6 mm for higher flow. Working pressure 21 bar, bend radius 55 mm.
Yellow PA12 Longlife polyamide tube 8/6 mm. Working pressure 21 bar, 6 mm inner diameter for higher air consumption.
Clear thick-walled PA12 Longlife polyamide tube 8/5 mm. Working pressure 34 bar, bend radius 35 mm.
Yellow PA12 Longlife polyamide tube 4/2.5 mm, wall 0.75 mm. Working pressure 34 bar, an easy-to-see colour.
Black PA12 Longlife polyamide tube 8/5 mm, wall 1.5 mm. Working pressure 34 bar, also sold by the metre.
Red thick-walled PA12 Longlife polyamide tube 12/9 mm. Working pressure 21 bar for a clearly marked supply.
Red PA12 Longlife polyamide tube 6/4 mm with a working pressure of 30 bar. It clearly marks an important circuit in the standard diameter.
Red PA12 Longlife polyamide tube 10/8 mm with a working pressure of 16 bar. High flow for a clearly marked supply.
Green PA12 Longlife polyamide tube 6/4 mm. The standard pneumatic diameter, working pressure 30 bar and bend radius 30 mm.
Blue PA12 Longlife polyamide tube 4/2.5 mm for control air with higher flow. Working pressure 34 bar, burst pressure 104 bar.
Clear PA12 Longlife polyamide tube 12/9 mm with a 1.5 mm wall. Working pressure 21 bar, and you can see condensate in it.
Red PA12 Longlife polyamide tube 4/2 mm. It clearly marks an important branch and withstands a working pressure of 50 bar.
Blue PA12 Longlife polyamide tube 4/2 mm for control and measuring air. Working pressure 50 bar, bend radius 15 mm, also sold by the metre.
Green PA12 Longlife polyamide tube 4/2 mm for colour-separated circuits. Wall 1 mm, working pressure 50 bar, bend radius 15 mm.
Red PA12 Longlife polyamide tube 8/6 mm with a working pressure of 21 bar. High flow and clear circuit marking.
Black PA12 Longlife polyamide tube 12/9 mm for main machine supplies. Wall 1.5 mm, working pressure 21 bar.
Red PA12 Longlife polyamide tube 4/2.5 mm with a working pressure of 34 bar. It sets a circuit apart and lets through more air than 4/2 mm.
Azure PA12 Longlife polyamide tube 10/8 mm for high flow. Working pressure 16 bar, bend radius 85 mm.
Azure PA12 Longlife polyamide tube 12/10 mm, the highest flow in the series. Working pressure 13 bar, bend radius 120 mm.
Azure PA12 Longlife tube 4/2.5 mm with a 0.75 mm wall and a working pressure of 34 bar. Compared with the thick-walled 4 mm tube it lets through more air.
Azure PA12 Longlife polyamide tube 6/4 mm, the most common pneumatic size. Working pressure 30 bar, bend radius 30 mm.
Black PA12 Longlife polyamide tube 10/8 mm for supplies with higher consumption. Working pressure 16 bar, weight 30 g/m.
Black PA12 Longlife polyamide tube 4/2 mm for thin control lines on machines. Thick 1 mm wall, working pressure 50 bar and temperatures up to +80 °C.

