IHP1 stainless steel high-pressure filters up to 100 bar

Up to 100 bar IHP1 stainless steel high-pressure filter and six filter elements from stainless steel mesh to activated carbon

IHP1 stainless steel filters from the manufacturer Omega Air clean compressed air at pressures up to 100 bar. The housing is made of stainless steel 1.4301, or 1.4404 on request.

Six filtration stages range from the N25 stainless steel mesh to activated carbon A. The range has 8 sizes with G 1/4" to G 2" threads and flows of 667 to 11,917 l/min at 7 bar. It is one of the high-pressure filters up to 420 bar.

6filtration stages

100 barworking pressure

8sizes G 1/4" to 2"

11,917 l/minmaximum flow at 7 bar

Filtration stages

Each tile leads to a stage with a table of sizes and spare elements.

IHP1 high-pressure filter and IHPN25 element

IHP1N25 coarse filters

The 25 µm stainless steel mesh traps coarse contaminants.

IHP1 high-pressure filter and IHPN5 element

IHP1N5 basic filters

The 5 µm stainless steel mesh traps solid contaminants.

IHP1 high-pressure filter and IHPR element

IHP1R dust filters

1 µm element for dust and liquid water, class 3.

IHP1 high-pressure filter and IHPM element

IHP1M fine pre-filters

0.1 µm fine pre-filter, residual oil below 0.1 mg/m³, class 2-x-2.

IHP1 high-pressure filter and IHPS element

IHP1S microfilters

0.01 µm microfilter, residual oil below 0.01 mg/m³, class 1-x-1.

IHP1 high-pressure filter and IHPA element

IHP1A activated carbon filters

Oil vapours, hydrocarbons and odours, residual oil below 0.005 mg/m³.

Stages at a glance

The ISO 8573-1 class is written as solid particles – water – oil.

IHP1 filtration stages
Stage	Filtration rating	ISO 8573-1 class	Residual oil	Element replacement	Temperature up to
N25 – coarse filter	25 µm	–	–	at least once a year	+65 °C
N5 – basic filter	5 µm	–	–	at least once a year	+65 °C
R – dust filter	1 µm	3-x-x	–	350 mbar, at least once a year	+65 °C
M – fine pre-filter	0.1 µm	2-x-2	< 0.1 mg/m³	350 mbar, at least once a year	+65 °C
S – microfilter	0.01 µm	1-x-1	< 0.01 mg/m³	350 mbar, at least once a year	+65 °C
A – activated carbon filter	–	1-x-1	< 0.005 mg/m³	every 6 months	+45 °C

Solid particle class 1 for activated carbon A only applies when an S microfilter is installed before it.

All filters in the range

Each row is a size with its thread, each column a filtration stage. The code leads to the product page of the filter.

IHP1 filters by size and stage
Size (thread)	N25	N5	R	M	S	A
003 (G 1/4")	IHP1N25-003	IHP1N5-003	IHP1R-003	IHP1M-003	IHP1S-003	IHP1A-003
005 (G 3/8")	IHP1N25-005	IHP1N5-005	IHP1R-005	IHP1M-005	IHP1S-005	IHP1A-005
007 (G 1/2")	IHP1N25-007	IHP1N5-007	IHP1R-007	IHP1M-007	IHP1S-007	IHP1A-007
010 (G 3/4")	IHP1N25-010	IHP1N5-010	IHP1R-010	IHP1M-010	IHP1S-010	IHP1A-010
018 (G 1")	IHP1N25-018	IHP1N5-018	IHP1R-018	IHP1M-018	IHP1S-018	IHP1A-018
030 (G 1 1/4")	IHP1N25-030	IHP1N5-030	IHP1R-030	IHP1M-030	IHP1S-030	IHP1A-030
047 (G 1 1/2")	IHP1N25-047	IHP1N5-047	IHP1R-047	IHP1M-047	IHP1S-047	IHP1A-047
094 (G 2")	IHP1N25-094	IHP1N5-094	IHP1R-094	IHP1M-094	IHP1S-094	IHP1A-094

#showmore#

How to put the filtration together

IHP range elements lined up in the direction of flow, numbered 1 to 6, with an arrow — In the direction of flow: 1 coarse filter N25, 2 basic filter N5, 3 dust filter R, 4 fine pre-filter M, 5 microfilter S, 6 activated carbon filter A.

The stages are arranged from coarse to fine in the direction of flow. Each stage protects the finer stages after it, so their elements last longer.

The fine pre-filter M goes before the microfilter S. An S microfilter always goes before activated carbon A — only with it does solid particle class 1 apply. Activated carbon must not work in an oil-saturated environment.

Sizes and dimensions

CHP and IHP filter sizes
Size	Thread	Nm³/h at 7 bar	l/min at 7 bar	A	B	C	D	Weight
003	G 1/4"	40	667	182 mm	98 mm	104 mm	30 mm	7.9 kg
005	G 3/8"	70	1,167	182 mm	98 mm	104 mm	30 mm	7.9 kg
007	G 1/2"	130	2,167	230 mm	118 mm	129 mm	36 mm	15.7 kg
010	G 3/4"	195	3,250	254 mm	118 mm	129 mm	36 mm	16.6 kg
018	G 1"	275	4,583	276 mm	145 mm	158 mm	46 mm	27.3 kg
030	G 1 1/4"	380	6,333	328 mm	145 mm	158 mm	46 mm	29.6 kg
047	G 1 1/2"	495	8,250	385 mm	195 mm	216 mm	65 mm	67.8 kg
094	G 2"	715	11,917	460 mm	195 mm	216 mm	65 mm	73.5 kg

A height, B head width, C maximum width of the housing, D from the top edge. Dimensions and weights according to the manufacturer.

Flow at a higher pressure

Graph of the flow correction factor by pressure from 7 to 420 bar; from 100 bar the factor is 12 — Flow correction factor by working pressure.

The flows apply to a pressure of 7 bar and a temperature of +20 °C. At a higher pressure the filter passes more air: the flow is multiplied by the correction factor, which rises up to 100 bar and stays at 12 above that.

IHP1 filter flow in l/min by pressure
Size (thread)	7 bar	25 bar	40 bar	64 bar	100 bar
003 (G 1/4")	667	2,001	3,335	5,336	8,004
005 (G 3/8")	1,167	3,501	5,835	9,336	14,004
007 (G 1/2")	2,167	6,501	10,835	17,336	26,004
010 (G 3/4")	3,250	9,750	16,250	26,000	39,000
018 (G 1")	4,583	13,749	22,915	36,664	54,996
030 (G 1 1/4")	6,333	18,999	31,665	50,664	75,996
047 (G 1 1/2")	8,250	24,750	41,250	66,000	99,000
094 (G 2")	11,917	35,751	59,585	95,336	143,004

Housing and connection

Drawing of a high-pressure filter with dimensions A, B, C and D — A height, B head width, C maximum width of the housing, D from the top edge.

Housing: stainless steel 1.4301, 1.4404 on request. Working temperature +1.5 to +65 °C, with activated carbon up to +45 °C.

The air is connected through female pipe threads in the filter head; the condensate leaves through a G 1/4" opening in the bottom. The filter is supplied with an element, without a condensate drain.

Accessories

TD420M 230 V timed drain

Timed condensate drain up to 420 bar, G 1/4".

TD420M 24 V timed drain

The same for a 24 V DC supply.

Stainless steel mounting bracket for CHP and IHP filters

CHP-W wall brackets

Stainless steel brackets for sizes 003 to 047.

IHP spare elements

The elements fit IHP1, IHP2 and IHP4 filters.

Condensate drainage and mounting

The condensate is drained by the TD420M timed drain up to 420 bar, which is connected with a G 1/4" thread; for a 24 V DC supply, there is the TD420M-24VDC.

The filter is fixed to the wall with the stainless steel brackets CHP-WS (sizes 003 and 005), CHP-WM (007 and 010), CHP-WL (018 and 030) or CHP-WXL (047). Liquid water before the filters is separated by IHP cyclone separators.

Other ranges

The same stages and sizes are also found in IHP2 stainless steel filters up to 250 bar and IHP4 stainless steel filters up to 420 bar. The nickel-plated carbon steel version for the same pressure is the CHP1 range.

Ventilek’s tip

One element for three pressures. An element of the same stage and size fits the filter for 100, 250 and 420 bar. When replacing it, you only need to know the stage and the size.

What pressure are the IHP1 filters rated for?: The working pressure is up to 100 bar, the temperature +1.5 to +65 °C, with activated carbon up to +45 °C.
How do I choose the size?: By the flow at your pressure. The flows apply to 7 bar; at a higher pressure, multiply them by the correction factor — from 100 bar it is 12.
How often should the elements be replaced?: Elements R, M and S at a pressure drop of 350 mbar, at least once every 12 months; the N25 and N5 stainless steel meshes at least once every 12 months. Activated carbon elements every 6 months.
Is a condensate drain included with the filter?: No. The filter is supplied with an element; the condensate drain is ordered separately. The TD420M timed drain up to 420 bar is suitable.