Filtration, regulation and treatment of compressed air, Page 12
-hankison-susicka-vzduch-kompresor-tllak-kondenzace-rosny-bod.jpg)
Product sorting
List of products
The WDF-100 condensing air dryer provides efficient compressed air drying with a flow rate of 100 m³/h (1 667 l/min) and a pressure dew point of +3 °C. Integrated filters of 1...
Replacement basic filter cartridge with 3 µm filtration capacity for OMEGA AIR AAFP-2160 filter. Recommended replacement 12 months or every 4,000 MH and when clogging of the...
Replacement basic filter cartridge with 3 µm filtration capacity for OMEGA AIR AAFP-35 and AAFP-60 filters. Recommended replacement 12 months or every 4,000 MH and when clogging...
Replacement basic filter cartridge with 3 µm filtration capacity for OMEGA AIR AAFP-510 filter. Recommended replacement 12 months or every 4,000 MH and when clogging of the...
Replacement catalytic filters (hopcalite) for OMEGA AIR - AAFH2-120. Suitable for removing CO andCO2 to the level of breathable air from compressed air according to ISO 8573-1...
Replacement catalytic filters (hopcalite) for OMEGA AIR - AAFH2-335. Suitable for removing CO andCO2 to the level of breathable air from compressed air according to ISO 8573-1...
Replacement dust filter cartridge with 1 µm filtration capacity for OMEGA AIR AAFR-78 filter. Recommended replacement 12 months or every 4,000 MH and when clogging of the filter...
Replacement filter with activated carbon AAFA2 for OMEGA AIR AAFA2-120. Use as a filter to remove residual oil content of oil vapours and aerosols with < 0.005 mg/m3from...
Replacement filter with activated carbon AAFA2 for OMEGA AIR AAFA2-198. Use as a filter to remove residual oil content of oil vapours and aerosols with < 0.005 mg/m3from...
Replacement filter with activated carbon AAFA2 for OMEGA AIR AAFA2-335. Use as a filter to remove residual oil content of oil vapours and aerosols with < 0.005 mg/m3from...
Service KIT after 4 years of operation Omega Air adsorption dryer ADRY-60 series includes replacement filter cartridges, silencers, check valve, gaskets, valve kit, adsorbent...
AFSS silicone-free microfilter with G3/8" connection thread designed for industrial painting applications, eliminates paint deteriorating contaminants. Filtration capacity 0,01...
Complete three-piece assembly with 1/2" connection and maximum flow rate of 3,500 l/min. Inlet pressure up to 16 bar with control range : 0,5 - 8 bar. It consists of a pressure...
Water-oil separators chemically separate oil and solid impurities from the condensate from the water, which can then be discharged into the waste. They contribute to a high...
Water-oil separators chemically separate oil and solid impurities from the condensate from the water, which can then be discharged into the waste. They contribute to a high...
Water-oil separators chemically separate oil and solid impurities from the condensate from the water, which can then be discharged into the waste. They contribute to a high...
The IEDC electronic skimmers with alarm output for remote monitoring and with the possibility of service connection for obtaining operating data from the device are primarily...
Adsorption dryer BDRY-600 designed for continuous separation of water vapour from compressed air with a flow rate of up to 7,708 l/min at a maximum pressure of 16 bar and...
Replacement filter cartridge PFI20 for filter with filtration capacity up to 20 um and working pressure 16 bar. Operating temperature up to 150°C.
The FDRY-1200 Adsorption Dryer is designed for continuous separation of water vapour from compressed air with a flow rate of up to 15,600 l/min at a maximum pressure of 16 bar...
Adsorption dryer BDRY-150 designed for permanent separation of water vapour from compressed air with a flow rate of up to 1 958 l/min at a maximum pressure of 16 bar and...
The BDRY-200 adsorption dryer is designed for continuous separation of water vapour from compressed air with a flow rate of up to 2,617 l/min at a maximum pressure of 16 bar and...
The BDRY-250 Adsorption Dryer is designed for continuous separation of water vapour from compressed air with a flow rate of up to 3,400 l/min at a maximum pressure of 16 bar and...
Adsorption dryer BDRY-400 designed for permanent separation of water vapour from compressed air with a flow rate of up to 5 358 l/min at a maximum pressure of 16 bar and...
Adsorption dryer BDRY-110 designed for permanent separation of water vapour from compressed air with a flow rate of up to 1 433 l/min at a maximum pressure of 16 bar and...
The BDRY-1000 Adsorption Dryer is designed for continuous separation of water vapour from compressed air with a flow rate of up to 13,067 l/min at a maximum pressure of 16 bar...
Water-oil separators chemically separate oil and solid impurities from the condensate from the water, which can then be discharged into the waste. They contribute to a high...
The FDRY-5000 Adsorption Dryer is designed for continuous separation of water vapour from compressed air with a flow rate of up to 65,000 l/min at a maximum pressure of 16 bar...
Replacement filter with activated carbon AAFA for OMEGA AIR AAFA-25 and AAFA-30. Absorption of residual oil, oil vapours and aerosols with a content of < 0.005 mg/m³ from...
AAFA activated carbon filter in 1/4" version for absorption of residual oil, oil vapours and aerosols with < 0,005 mg/m3 from compressed air according to ISO 8573-1 class 1....
Replacement dust filter cartridge with 1 µm filtration capacity for OMEGA AIR AAFR-335. Recommended replacement 12 months or every 4,000 MH and when clogging of the filter...
Replacement sintered bronze filter cartridge 15 µm for OMEGA AIR filter AAFB-198. Recommended replacement 12 months or every 4,000 MH and when clogging of the filter cartridge...
The BFP basic filter cartridge is used to remove mechanical impurities from compressed air. Acrylic fibre and cellulose liner with a filtration capacity of up to 3 μm. Working...
The BFA microfiltration insert is used to remove mechanical impurities and oil from compressed air. Borosilicate microfibre and activated carbon liner with filtration capacity...
AAFM pre-filter in 3" design for removal of fine impurities up to 0.1 um from compressed air according to ISO 8573-1 class 2. Body with easily removable container and designed...
AAFS microfilter in 3" design to remove micro impurities up to 0.01 um from compressed air according to ISO 8573-1 class 1. Body with easily removable container and designed for...
The B-AIR breathable air filter with G1/2" connection thread is designed for a flawless supply of breathable atmosphere. The microfilter removes impurities down to 0.01 um....
Replacement catalytic filters (hopcalite) for OMEGA AIR - AAFH2-78. Suitable for removing CO andCO2 to the level of breathable air from compressed air according to ISO 8573-1...
The FDRY-2000 Adsorption Dryer is designed for continuous separation of water vapour from compressed air with a flow rate of up to 26,000 l/min at a maximum pressure of 16 bar...
AAFM pre-filter in 1/4" design for removal of fine impurities up to 0.1 um from compressed air according to ISO 8573-1 class 2. Body with easily removable container and designed...