63 kW
Screw and piston compressors with a 63 kW input rating. Input power is a useful first filter but not the whole story — what decides the choice is the free air delivered in litres per minute at your working pressure and how long the machine runs without a break. Continuous demand calls for a screw compressor; intermittent work with idle time is fine on a piston machine. Allow for the receiver, for getting the warm air out of the compressor room, and for an adequately rated electrical supply.
-
Black Wind piston compressors; small 230 V machines
-
Atmos reciprocating compressors; PERFECT cast iron series
-
Walter reciprocating compressors; GK cast iron robust machines
-
ABAC reciprocating compressors; Line series
-
ABAC piston compressors; Extensive and Expert series
-
ABAC reciprocating compressors; Pro Zero oil-free series
-
ABAC reciprocating compressors; Pro Silent series
-
Super Silent compressors; super quiet oil-free design
-
INDUSTRIAL TECH compressors; industrial for continuous operation
-
CLR reciprocating compressors; oil-free dental design
-
Combustion compressors; petrol and diesel engines
-
Screw compressors; 3 brands, 2.2–280 kW
-
Pressure vessels; self-contained and equipped
-
Compressor accessories; oil-drain-valves
.png)
Product sorting
List of products
At ten bar it gives 12,000 l/min, almost what the 55 kW gives at seven. A pressure loss of only 14 %, the least of any ten-bar machine in the range.
The same frame and footprint as the 55 kW, but 1,500 l/min more. 14,000 l/min at seven bar and the smallest pressure penalty in the lower half of the range.
The last machine in the range with a DN 50 outlet — above it the pipework goes to DN 65. 13,000 l/min at eight bar, regulation from 3,600.