Filtration, regulation and treatment of compressed air, Page 9
-hankison-susicka-vzduch-kompresor-tllak-kondenzace-rosny-bod.jpg)
Product sorting
List of products
AAFM pre-filter in 3" design for removal of fine impurities up to 0.1 um from compressed air according to ISO 8573-1 class 2. Body with easily removable container and designed...
AAFM pre-filter in 3" design for removal of fine impurities up to 0.1 um from compressed air according to ISO 8573-1 class 2. Body with easily removable container and designed...
AAFB coarse filter in 3/8" design to remove the largest mechanical impurities up to 15 um from compressed air according to ISO 8573-1 class 7. Body with easily removable...
Water oil FOD separatorsDischarging condensate directly into the sewer is illegal and the condensate must be disposed of as oilWater oil FOD separators separate water and...
Replacement fine filter cartridge with 0.1 µm filtration capacity for OMEGA AIR AAFM-25 and AAFM-30 pre-filters. Recommended replacement 12 months or every 4,000 MH and when...
Hankison 's NGF series NGF type PF basic ISO compressed air filtration. Filter size F03 with 3/8" female threads. The filter is equipped with a clogging indicator and an...
Absorption filter with 0.005 um activated carbon, 3/8" connection, for compressed air and neutral gases with a flow rate of 700 l/min. Design according to ATEX II 2G2D. Maximum...
AAFR dust filter in 1" design to remove dust impurities up to 1 um from compressed air according to ISO 8573-1 class 3. Body with easily removable container and designed for a...
AAFA activated carbon filter in 1/4" version for absorption of residual oil, oil vapours and aerosols with < 0,005 mg/m3 from compressed air according to ISO 8573-1 class 1....
Replacement basic filter cartridge with 3 µm filtration capacity for OMEGA AIR AAFP-335 filter. Recommended replacement 12 months or every 4,000 MH and when clogging of the...
Futura Treatment Units - Compressed Air Pressure Regulators, Designed for compressed air with or without oil and for neutral gases, Designed according to ATEX II 2G2D, Maximum...
AAFP basic filter in 3/8" design to remove basic mechanical impurities up to 3 um from compressed air according to ISO 8573-1 class 6. Body with easily removable container and...
AAFP basic filter in 1/4" design for removal of basic mechanical impurities up to 3 um from compressed air according to ISO 8573-1 class 6. Body with easily removable container...
AAFP basic filter in 3/8" design to remove basic mechanical impurities up to 3 um from compressed air according to ISO 8573-1 class 6. Body with easily removable container and...
Water-oil separators chemically separate oil and solid impurities from the condensate from the water, which can then be discharged into the waste. They contribute to a high...
Replacement microfiltration cartridge with filtration capacity 0,01 µm for OMEGA AIR AAFS-510 microfilters. Recommended replacement 12 months or every 4,000 MH and when clogging...
AAFA activated carbon filter in 1 1/2" version for absorption of residual oil, oil vapours and aerosols with < 0,005 mg/m3 from compressed air according to ISO 8573-1 class 1....
The BFM pre-filter insert is used to remove mechanical impurities and oil from the compressed air. Borosilicate microfibre insert with a filtration capacity of up to 0.1 μm....
The BFS microfiltration insert is used to remove mechanical impurities and oil from compressed air. Borosilicate microfibre insert with a filtration capacity of up to 0.01 μm....
The HFS filter insert removes mechanical impurities and oil from the compressed air. Borosilicate microfibre insert with a filtration capacity of up to 0.01 μm. Working pressure...
Air pressure regulator in metal design up to 18 bar. Compressed air control with a flow rate of 4,600 l/min in size 3 thread 1". Regulation range 0 - 12 bar. Application mainly...
Replacement basic filter cartridge with 3 µm filtration capacity for OMEGA AIR AAFP-2160 filter. Recommended replacement 12 months or every 4,000 MH and when clogging of the...
AAFP 1" basic filter for removal of basic mechanical impurities up to 3 um from compressed air according to ISO 8573-1 class 6. Body with easily removable container and designed...
AAFP basic filter in 3" design to remove basic mechanical impurities up to 3 um from compressed air according to ISO 8573-1 class 6. Body with easily removable container and...
Kit for wall mounting and connecting filters. The set consists of two angles that are attached to the edges of the filter and allow subsequent mounting on the wall. Connecting...
Replacement filter with capsule and molecular sieve for OMEGA AIR - AAFH2-120. Designed as a fuse against moisture leakage into the air during shutdown of ISO 8573-1 class 1...
AAFP basic filter in 1 1/2" design for removal of basic mechanical impurities up to 3 um from compressed air according to ISO 8573-1 class 6. Body with easily removable...
AAFC cyclone separator in 1" design with a flow rate of 3,300 l/min for partial removal of condensate from compressed air. Here the flow changes to rotational and due to the...
Kit for wall mounting and connecting filters. The set consists of two angles that are attached to the edges of the filter and allow subsequent mounting on the wall. Connecting...
Futura Treatment Units - Compressed Air Pressure Regulators, Designed for compressed air with or without oil and for neutral gases, Designed according to ATEX II 2G2D, Maximum...
Hankison filter cartridge for the PF series air filter type F02. The filter insert is suitable for easy replacement by means of a thread in the filter. The maximum pressure of...
AAFM pre-filter in 2" design for removal of fine impurities up to 0.1 um from compressed air according to ISO 8573-1 class 2. Body with easily removable container and designed...
Replacement dust filter cartridge with 1 µm filtration capacity for OMEGA AIR AAFR-510 filter. Recommended replacement 12 months or every 4,000 MH and when clogging of the...
Replacement fine filter cartridge with 0.1 µm filtration capacity for OMEGA AIR AAFM-1500 and AAFM-1680 pre-filters. Recommended replacement 12 months or every 4,000 MH and when...
AAFS microfilter in 3/8" design to remove micro impurities up to 0.01 um from compressed air according to ISO 8573-1 class 1. Body with easily removable container and designed...
Hankison 's NGF series NGF type PF basic ISO compressed air filtration. Filter size F06 with 3/4" female thread connection. The filter is equipped with a clogging indicator and...
Replacement filter with activated carbon AAFA for OMEGA AIR AAFA-335. Absorption of residual oil, oil vapours and aerosols with a content of < 0.005 mg/m³ from compressed air...
Hankison 's NGF series NGF type PF basic ISO compressed air filtration. Filter size F07 with 3/4" female thread connection. The filter is equipped with a clogging indicator and...
Replacement microfiltration cartridge with filtration capacity of 0.01 µm for OMEGA AIR AAFS-335 microfilters. Recommended replacement 12 months or every 4,000 MH and when...
Kit for wall mounting and connecting filters. The set consists of two angles that are attached to the edges of the filter and allow subsequent mounting on the wall. Connecting...