BFB flanged compressed air coarse filters with sintered element

The BFB coarse filter has sintered brass elements and traps solid particles larger than 15 µm. It is a coarse pre-filter: it removes larger contaminants before they reach the finer stages, which then last longer.
The BFB filter comes in 10 sizes with DN80 to DN300 flanges and flows of 28,000 to 523,333 l/min at 7 bar. It is one of the stages of the BF flanged filters — the housing is the same for all stages, only the elements differ.
BFB filters by size
The size determines the flange, the flow and the number of elements. The element is the same for all sizes.
| BFB filters and spare elements by size | |||||
|---|---|---|---|---|---|
| Filter | Flange | l/min at 7 bar | Nm³/h at 7 bar | Number of elements | Spare element |
| BFB-0240 | DN80 | 28,000 | 1,680 | 1 | BFB-0240V |
| BFB-0300 | DN100 | 52,500 | 3,150 | 2 | BFB-0240V |
| BFB-0450 | DN125 | 78,333 | 4,700 | 3 | BFB-0240V |
| BFB-0600 | DN150 | 105,000 | 6,300 | 4 | BFB-0240V |
| BFB-0900 | DN150 | 156,667 | 9,400 | 6 | BFB-0240V |
| BFB-1200 | DN200 | 209,167 | 12,550 | 8 | BFB-0240V |
| BFB-1500 | DN200 | 261,667 | 15,700 | 10 | BFB-0240V |
| BFB-1800 | DN250 | 314,167 | 18,850 | 12 | BFB-0240V |
| BFB-2500 | DN250 | 418,333 | 25,100 | 16 | BFB-0240V |
| BFB-3000 | DN300 | 523,333 | 31,400 | 20 | BFB-0240V |
The flows apply to a pressure of 7 bar and a temperature of +20 °C. You will find the dimensions and weight on the product page of each filter.
#showmore#
When to use it
A coarse filter suits the start of the filtration, where larger contaminants from the air line enter the air. On its own it achieves solid particle class 7; it does not trap oil or vapours.
The sintered element can be cleaned in an ultrasonic bath or by back-flushing; how often depends on the operation. When cleaning is no longer enough, it is replaced with a new one.
Where to place it

At the start of the filtration, before the BFP basic filter or BFR dust filter.
Flow by pressure
The catalogue flows apply to a pressure of 7 bar and a temperature of +20 °C. At a different pressure, the flow changes according to the correction factor.
| BFB filter flow in l/min by pressure | ||||||
|---|---|---|---|---|---|---|
| Size (flange) | 4 bar | 6 bar | 7 bar | 10 bar | 12 bar | 16 bar |
| 0240 (DN80) | 17,640 | 24,640 | 28,000 | 38,640 | 45,640 | 59,640 |
| 0300 (DN100) | 33,075 | 46,200 | 52,500 | 72,450 | 85,575 | 111,825 |
| 0450 (DN125) | 49,350 | 68,933 | 78,333 | 108,100 | 127,683 | 166,849 |
| 0600 (DN150) | 66,150 | 92,400 | 105,000 | 144,900 | 171,150 | 223,650 |
| 0900 (DN150) | 98,700 | 137,867 | 156,667 | 216,200 | 255,367 | 333,701 |
| 1200 (DN200) | 131,775 | 184,067 | 209,167 | 288,650 | 340,942 | 445,526 |
| 1500 (DN200) | 164,850 | 230,267 | 261,667 | 361,100 | 426,517 | 557,351 |
| 1800 (DN250) | 197,925 | 276,467 | 314,167 | 433,550 | 512,092 | 669,176 |
| 2500 (DN250) | 263,550 | 368,133 | 418,333 | 577,300 | 681,883 | 891,049 |
| 3000 (DN300) | 329,700 | 460,533 | 523,333 | 722,200 | 853,033 | 1,114,699 |
Elements, drain and maintenance

Element: sintered brass, pressure drop of a new element 20 mbar. The air flows through it from the inside out. Working temperature +1.5 to +65 °C, pressure up to 16 bar.
The filter is supplied without a condensate drain. You will find float, timed and electronic drains among the condensate drains for filters.
Replace the elements once a year or at a pressure drop of 350 mbar. The pressure drop is shown by the MDA 60 differential pressure gauge.
Spare elements BFB-0240V, drains and the gauge are in the accessories for BF filters.
Elements and accessories for BFB filters
Ventilek’s tip
A coarse filter spares the fine ones. When larger contaminants break loose in the air line, the B sintered element traps them, and the fine elements after it do not clog so quickly.
- What rating does the BFB coarse filter have?
- 15 µm, solid particle class 7 according to ISO 8573-1.
- What is the element made of?
- Sintered brass. It can be cleaned in an ultrasonic bath or by back-flushing.
- How many elements are in the filter?
- Depending on the size, 1 to 20 — the same BFB-0240V element in all sizes.
Product sorting
List of products
With a DN150 flange and a flow of 105,000 l/min at 7 bar, the BFB-0600 coarse filter traps coarse solid contaminants larger than 15 µm and protects the finer stages after it....
With a DN150 flange and a flow of 156,667 l/min at 7 bar, the BFB-0900 coarse filter traps coarse solid contaminants larger than 15 µm and protects the finer stages after it....
With a DN200 flange and a flow of 209,167 l/min at 7 bar, the BFB-1200 coarse filter traps coarse solid contaminants larger than 15 µm and protects the finer stages after it....
With a DN200 flange and a flow of 261,667 l/min at 7 bar, the BFB-1500 coarse filter traps coarse solid contaminants larger than 15 µm and protects the finer stages after it....
With a DN250 flange and a flow of 314,167 l/min at 7 bar, the BFB-1800 coarse filter traps coarse solid contaminants larger than 15 µm and protects the finer stages after it....
With a DN250 flange and a flow of 418,333 l/min at 7 bar, the BFB-2500 coarse filter traps coarse solid contaminants larger than 15 µm and protects the finer stages after it....
With a DN300 flange and a flow of 523,333 l/min at 7 bar, the BFB-3000 coarse filter traps coarse solid contaminants larger than 15 µm and protects the finer stages after it....
Spare element BFB-0240V for BFB coarse filters of all sizes, diameter 90 mm, height 760 mm. Recommended replacement once a year or at a pressure drop of 350 mbar.



