Customer support:311 532 091info@kompresory-vzduchotechnika.cz
    Currency
    EUR
    Language
    English
    Home / Air treatment

    Filtration, regulation and treatment of compressed air

    Treatment of compressed air is an absolutely indispensable part of every professional compressor system. Why is it so important? Compressed air naturally concentrates dust particles from its surroundings, oil residues from the unit, and a huge amount of moisture that condenses into water. This combination forms an aggressive emulsion that is extremely harmful to any equipment connected downstream of the compressor.

    • ✅ Corrosion protection: Prevents rusting of pipes and clogging of expensive pneumatic tools.
    • ✅ Failure prevention: Clean and dry air eliminates seizing of moving parts and valves in automated lines.
    • ✅ Cost savings: Thanks to our comprehensive air treatment program, you will multiply the lifespan of the entire system and avoid costly servicing or unplanned production downtimes.

    We offer you everything from air dryers and filters to pressure regulators, separators, and cyclone separators. Find out more about how to properly filter and treat air in the text below.

    #ShowMore#

    Basic pillars of compressed air treatment

    🔹 1. Drying (Moisture Removal)

    Removes water from compressed air and eliminates condensation in the distribution system.

    🔹 2. Filtration (Removal of solid particles)

    Ensures top air purity precisely according to ISO 8573 standard.

    🔹 3. Pressure regulation

    Ensures safe and constant output pressure for every application.

    🔹 4. Condensate and oil separation

    Efficient and ecological separation of residual hazardous liquids.

    ISO 8573-1 Standard: What Quality Do You Need?

    How to determine the compressed air purity required for your application? The main guide is the international ISO 8573-1 standard. It divides the quality of produced air into seven classes (0 to 6). Each class has a strictly defined maximum content of solid particles, water, and oil.

    While for general workshop air, class 4-4-5 (order: particles – water – oil) is usually sufficient, the pharmaceutical, food, or chemical industries require absolute purity. We discuss this topic in detail in the article: How to Filter Compressed Air.

    Step-by-step air treatment

    The correct sequence of components is key! Immediately after the compressor, it is best to install an air dryer supplemented with pre-filtration (e.g., a cyclone separator) to capture coarse condensate. This is followed by fine filtration, the micron purity of which depends on your needs (different for a paint shop, different for a dentist).

    At the very end of the line, the air is regulated to the required pressure. Don't forget that filter cartridges and granules have a limited lifespan. For measuring wear in professional filters, we therefore use clogging indicators or differential pressure gauges.

    Maskot Ventilek radí s úpravou stlačeného vzduchu

    Ventilek advises: Folks, saving on air treatment simply doesn't pay off! Compressed air straight from the compressor is like rainwater mixed with oil and sand. Imagine sending this into a brand-new pneumatic wrench or a plasma cutter worth tens of thousands. After a few months, your machine is ruined! Investing in a condensate dryer and a few smart filters is only a tiny fraction of what constant repairs of rusted pistons and clogged nozzles would cost you. And for peace of mind – choose filters with a differential pressure gauge, they will "tell" you themselves when it's time to replace the cartridge.

    Bestsellers

    Pressure regulator up to 12 bar - 1/4"
    Stock (24 pcs)
    Code: P2R-14
    Was: €26,58  (–5 %)
    €25,25
    (€20,87 excl. VAT)
    Fixing bracket B2UR - 1/4"
    Stock (4 pcs)
    Code: B2UR-1
    Was: €3,65  (–4 %)
    €3,47
    (€2,87 excl. VAT)
    Pressure regulator with filter up to 12 bar - 1/4"
    Stock (13 pcs)
    Code: P2S-14
    Was: €46,54  (–5 %)
    €44,21
    (€36,54 excl. VAT)

    Product sorting

    20 items total

    List of products

    AWL silencer - 3/8"
    Low noise
    €33,75 –10 %
    AWL silencer - 3/8"
    Stock (500 pcs)
    €25,10 excl. VAT
    €30,37 / pcs

    High-flow silencer with external pipe thread G 3/8" designed especially for compressed air expansion during regeneration and ventilation of adsorption dryer production columns....

    Code: AWL-38
    Filling valve 1/2", 4,500 l/min
    €79,49 –5 %
    Filling valve 1/2", 4,500 l/min
    Stock (20 pcs)
    €62,40 excl. VAT
    €75,51 / pcs

    Treatment units FUTURA, Shut-off, switching, filling, check valves, Designed for compressed air and for neutral gases, Design ATEX II 2G2D, Operating temperature -10°C to +50°C,...

    Code: BF12-F
    Switching valves - voltage 230V AC, 1/2", 4,500 l/min
    €157,24 –5 %
    Switching valves - voltage 230V AC, 1/2", 4,500 l/min
    Stock (10 pcs)
    €123,45 excl. VAT
    €149,37 / pcs

    Switching valves - Electric 230V AC - FUTURA air treatment units, Designed for compressed air and neutral gases ATEX II 2G2D, Operating temperature -10°C to +50°C, Materials :...

    Code: MCL12-F230VAC
    Switching valves - voltage 230V AC, 3/8", 4,500 l/min
    €157,24 –5 %
    Switching valves - voltage 230V AC, 3/8", 4,500 l/min
    Stock (3 pcs)
    €123,45 excl. VAT
    €149,37 / pcs

    Switching valve with 230 VAC in 3/8" version with flow rate up to 4 500 l/min FUTURA series up to 16 bar. Designed for compressed air and for neutral gases complying with ATEX...

    Code: MCL382-F230VAC
    Switching valves - voltage 24V DC, 1/2", 4,500 l/min
    €157,24 –5 %
    Switching valves - voltage 24V DC, 1/2", 4,500 l/min
    Stock (50 pcs)
    €123,45 excl. VAT
    €149,37 / pcs

    Switching valve with 24 VDC in 1/2" version with flow rate up to 4,500 l/min FUTURA series up to 16 bar. Designed for compressed air and for neutral gases complying with ATEX II...

    Code: MCL12-F24VDC
    Switching valves - voltage 24V DC, 3/8", 4,500 l/min
    €157,24 –5 %
    Switching valves - voltage 24V DC, 3/8", 4,500 l/min
    Stock (5 pcs)
    €123,45 excl. VAT
    €149,37 / pcs

    24 VDC switching valve in 3/8" version with flow rate up to 4 500 l/min FUTURA series up to 16 bar. Designed for compressed air and for neutral gases complying with ATEX II...

    Code: MCL382-F24VDC
    Filling valve 3/8", 4,500 l/min
    €79,49 –5 %
    Filling valve 3/8", 4,500 l/min
    Stock (5 pcs)
    €62,40 excl. VAT
    €75,51 / pcs

    Treatment units FUTURA, Shut-off, switching, filling, check valves, Designed for compressed air and for neutral gases, Design ATEX II 2G2D, Operating temperature -10°C to +50°C,...

    Code: BF382-F
    Shut-off valve 1/2", 4,500 l/min
    €73,92 –4 %
    Shut-off valve 1/2", 4,500 l/min
    Stock (50 pcs)
    €58,04 excl. VAT
    €70,23 / pcs

    Shut-off valve in 1/2" version with flow rate up to 4500 l/min FUTURA series up to 16 bar. Designed for compressed air and for neutral gases complying with ATEX II 2G2D....

    Code: K12-F
    Pneumatic switching valve - 1/2", 4,500 l/min
    €167,47 –5 %
    Pneumatic switching valve - 1/2", 4,500 l/min
    Stock (14 pcs)
    €131,48 excl. VAT
    €159,09 / pcs

    Switching valve with 230 VAC in 1/2" version with flow rate up to 4 500 l/min FUTURA series up to 16 bar. Designed for compressed air and for neutral gases complying with ATEX...

    Code: PCL12-F
    Pneumatic switching valve - 3/8", 4,500 l/min
    €167,47 –5 %
    Pneumatic switching valve - 3/8", 4,500 l/min
    Stock (2 pcs)
    €131,48 excl. VAT
    €159,09 / pcs

    Switching valve with 230 VAC in 3/8" version with flow rate up to 4 500 l/min FUTURA series up to 16 bar. Designed for compressed air and for neutral gases complying with ATEX...

    Code: PCL382-F
    Shut-off valve 3/8", 4,500 l/min
    €73,92 –4 %
    Shut-off valve 3/8", 4,500 l/min
    Stock (9 pcs)
    €58,04 excl. VAT
    €70,23 / pcs

    Shut-off valve in 3/8" design with flow rate up to 4 500 l/min FUTURA series up to 16 bar. Designed for compressed air and for neutral gases complying with ATEX II 2G2D....

    Code: K382-F
    B2L maznice 18 bar vzduch stlaceny 2
    €52,38 –5 %
    Metal lubricator B2 up to 18 bar - 3/8"
    Stock (4 pcs)
    €41,12 excl. VAT
    €49,76 / pcs

    Lubricator in metal design up to 18 bar with a flow rate of 4,500 l/min in size 2 with 3/8" thread for efficient oil mist doses for lubricating pneumatic tools or drives on...

    Code: B2L-38
    B2R pilotni regulator tlaku 18 bar vzduch stlaceny 2
    €69,96 –5 %
    Pilot pressure regulator metal B2 up to 18 bar - 1/2"
    Stock (1 pcs)
    €54,93 excl. VAT
    €66,46 / pcs

    Pilot air pressure regulator in metal design up to 18 bar. Remote compressed air control with a flow rate of 4,500 l/min in size 2 1/2" thread. Regulation range 0 - 12 bar....

    Code: B2PR-12
    AF filtr element MVAC medical OMEGA AIR
    Original parts
    €360,40 –3 %
    Filter insert MVAC-2006V
    up to 14 days
    €288,92 excl. VAT
    €349,59 / pcs

    Filter cartridge for medical vacuum filter MVAC-2006V. Applications mainly in medical devices. Working pressure 20 to 2000 mbar, maximum flow up to 4500 l/min.

    Code: MVAC-2006V
    Filter insert PVACM-2006V
    Original parts
    €359,57 –3 %
    Filter insert PVACM-2006V
    up to 14 days
    €288,25 excl. VAT
    €348,78 / pcs

    Filter insert for PVACM vacuum microfilter designed to protect vacuum pumps and vacuum pumps from solid impurities. Filtration capacity up to 0.01 um. Working pressure 20 to...

    Code: PVACM-2006V
    Filter insert PVACP-2006V
    Original parts
    €359,57 –3 %
    Filter insert PVACP-2006V
    up to 14 days
    €288,25 excl. VAT
    €348,78 / pcs

    Filter insert for PVACP vacuum pre-filter designed to protect vacuum pumps and vacuum pumps from solid impurities. Filtration capacity up to 3 um. Working pressure 20 to 2000...

    Code: PVACP-2006V
    B2L maznice 18 bar vzduch stlaceny 2
    €52,38 –5 %
    Metal lubricator B2 up to 18 bar - 1/2"
    up to 14 days
    €41,12 excl. VAT
    €49,76 / pcs

    Metal grease gun up to 18 bar with a flow rate of 4,500 l/min in size 2 with 1/2" thread for efficient oil mist doses for lubricating pneumatic tools or drives on production...

    Code: B2L-12
    M VAC filter
    €1 723,37 –3 %
    Vacuum filter MVAC G3"
    up to 14 days
    €1 381,55 excl. VAT
    €1 671,67 / pcs

    MVAC medical vacuum filter with G3" connection thread designed for effective removal of solid and liquid impurities and bacteria from the suction side of vacuum pumps....

    Code: MVAC-2006
    Vacuum microfilter PVACP G3"
    €1 635,48 –3 %
    Vacuum microfilter PVACP G3"
    up to 14 days
    €1 311,09 excl. VAT
    €1 586,42 / pcs

    Vacuum microfilter PVACM with G3" connection thread for protection of vacuum pumps and vacuum pumps against solid impurities. Filtration capacity up to 0.01 um. Working pressure...

    Code: PVACM-2006
    Vacuum prefilter PVACP G3"
    €1 634,70 –3 %
    Vacuum prefilter PVACP G3"
    up to 14 days
    €1 310,46 excl. VAT
    €1 585,66 / pcs

    Vacuum pre-filter PVACP with G3" connection thread for protection of vacuum pumps and vacuum pumps against solid impurities. Filtration capacity up to 3 um. Working pressure 20...

    Code: PVACP-2006

    Listing controls

    20 items total