Filtration, regulation and treatment of compressed air, Page 6
-hankison-susicka-vzduch-kompresor-tllak-kondenzace-rosny-bod.jpg)
Product sorting
List of products
The FDRY-2000 Adsorption Dryer is designed for continuous separation of water vapour from compressed air with a flow rate of up to 26,000 l/min at a maximum pressure of 16 bar...
Pressure regulator with 5 um air filtration for compressed air with or without oil and for neutral gases up to 16 bar. Design according to ATEX II 2G2D. The adjusting pin can be...
AAFP 1" basic filter for removal of basic mechanical impurities up to 3 um from compressed air according to ISO 8573-1 class 6. Body with easily removable container and designed...
The BDRY-1000 Adsorption Dryer is designed for continuous separation of water vapour from compressed air with a flow rate of up to 13,067 l/min at a maximum pressure of 16 bar...
AAFM 1/2" pre-filter for removing fine impurities up to 0.1 um from compressed air according to ISO 8573-1 class 2. Body with easily removable container and designed for a flow...
Replacement microfiltration cartridge with filtration capacity 0,01 µm for OMEGA AIR AAFS-2760 microfilters. Recommended replacement 12 months or every 4,000 MH and when...
Adsorption dryer BDRY-400 designed for permanent separation of water vapour from compressed air with a flow rate of up to 5 358 l/min at a maximum pressure of 16 bar and...
Adsorption dryer BDRY-150 designed for permanent separation of water vapour from compressed air with a flow rate of up to 1 958 l/min at a maximum pressure of 16 bar and...
The BDRY-250 Adsorption Dryer is designed for continuous separation of water vapour from compressed air with a flow rate of up to 3,400 l/min at a maximum pressure of 16 bar and...
Adsorption dryer BDRY-110 designed for permanent separation of water vapour from compressed air with a flow rate of up to 1 433 l/min at a maximum pressure of 16 bar and...
Adsorption dryer BDRY-800 designed for permanent separation of water vapour from compressed air with a flow rate of up to 10 058 l/min at a maximum pressure of 16 bar and...
Shut-off valve in 1/4" version with flow rate up to 2,000 l/min FUTURA series up to 16 bar. Designed for compressed air and for neutral gases complying with ATEX II 2G2D....
Replacement microfilter cartridge with filtration capacity 0,01 µm for OMEGA AIR AAFS-78 microfilters. Recommended replacement 12 months or every 4,000 MH and when clogging of...
Replacement basic filter cartridge with 3 µm filtration capacity for OMEGA AIR AAFP-510 filter. Recommended replacement 12 months or every 4,000 MH and when clogging of the...
Replacement sintered bronze 15 µm filter cartridge for OMEGA AIR AAFB-35 and AAFB-35 filters. Recommended replacement 12 months or every 4,000 MH and when clogging of the filter...
AAFC 2" cyclone separator with a flow rate of 25,000 l/min for partial removal of condensate from compressed air. Here the flow changes to rotational and due to the rotation and...
AAFC cyclone separator in 3" design with a flow rate of 36,000 l/min for partial removal of condensate from compressed air. Here the flow changes to rotational and due to the...
Replacement fine filter cartridge with 0.1 µm filtration capacity for OMEGA AIR AAFM-120 pre-filter. Recommended replacement 12 months or every 4,000 MH and when clogging of the...
The BDRY-200 adsorption dryer is designed for continuous separation of water vapour from compressed air with a flow rate of up to 2,617 l/min at a maximum pressure of 16 bar and...
The ADRY-6 series adsorption dryer has been designed for continuous separation of water vapour from compressed air at flow rates up to 100 l/min. Reduces the pressure dew point...
Replacement basic filter cartridge with 3 µm filtration capacity for OMEGA AIR AAFP-35 and AAFP-60 filters. Recommended replacement 12 months or every 4,000 MH and when clogging...
Water-oil separators chemically separate oil and solid impurities from the condensate from the water, which can then be discharged into the waste. They contribute to a high...
Water-oil separators chemically separate oil and solid impurities from the condensate from the water, which can then be discharged into the waste. They contribute to a high...
AAFS 1" microfilter to remove micro impurities up to 0.01 um from compressed air according to ISO 8573-1 class 1. Body with easily removable container and designed for a flow...
AAFC cyclone separator in 1 1/2" design with a flow rate of 8,500 l/min for partial removal of condensate from compressed air. Here the flow changes to rotational and due to the...
The ADRY-75 Series Adsorption Dryer was designed for continuous separation of water vapor from compressed air at flow rates up to 1,250 l/min. Reduces the pressure dew point...
AAFP basic filter in 1/2" design for removal of basic mechanical impurities up to 3 um from compressed air according to ISO 8573-1 class 6. Body with easily removable container...
The ADRY-24 series adsorption dryer was designed for continuous separation of water vapour from compressed air at flow rates up to 400 l/min. Reduces the pressure dew point down...
The ADRY-36 series adsorption dryer has been designed for continuous separation of water vapour from compressed air at flow rates up to 600 l/min. Reduces the pressure dew point...
AAFA activated carbon filter in 1/2" version for absorption of residual oil, oil vapours and aerosols with < 0,005 mg/m3 from compressed air according to ISO 8573-1 class 1....
Complete unit 2-piece pressure regulator assembly with filter and oiler in one unit. Designed for compressed air and neutral gases. Design according to ATEX II 2G2D. Maximum...
Futura Air Treatment Units - Competent 2-part units, Pressure regulator assembly with filter and oiler in one unit, Designed for compressed air and for neutral gases, Design...
The ADRY-60 series adsorption dryer was designed for continuous separation of water vapour from compressed air at flow rates up to 1,000 l/min. Reduces the pressure dew point...
Service KIT after 2 years of operation of the Omega Air adsorption dryer FDRY-3750 series includes a replacement microfilter cartridge, dust filter and replacement silencers,...
AAFM 1" pre-filter for the removal of fine impurities up to 0.1 um from compressed air according to ISO 8573-1 class 2. Body with easily removable container and designed for a...
The filters are used to remove the largest mechanical impurities from compressed air up to 15 um according to ISO 8573-1 class 7. Connection by flange with DN80 clearance....
Replacement cyclone cartridge for liquid water filtration AAFC-2160V. Recommended replacement 12 months or every 4,000 MH and upon indication of clogging of the filter element...
Cyclone separator SFH with flange connection DN80. It enables inexpensive and effective removal of water and impurities from compressed air. Working pressure 16 bar, working...
Replacement fine filter cartridge with 0.1 µm filtration capacity for OMEGA AIR AAFM-35 and AAFM-60 pre-filters. Recommended replacement 12 months or every 4,000 MH and when...
Cyclone separator CS with flange connection DN65. It enables inexpensive and effective removal of water and impurities from compressed air. Working pressure 16 bar, working...