Filtration, regulation and treatment of compressed air, Page 7
-
Treatment units; basic units for air
-
Industrial filtration; ISO 8573 - ISO 12500
-
Air dryers; air moisture removal
-
Pressure regulators; precision robust design
-
Cyclone separators; cyclone filtration principle
-
Water-oil separators; separates water from oil
-hankison-susicka-vzduch-kompresor-tllak-kondenzace-rosny-bod.jpg)
Bestsellers
AAFC cyclone separator in 3/8" design with a flow rate of 1,000 l/min for partial removal of condensate from compressed air. Here the flow changes to rotational and due to the...
AAFA 1" activated carbon filter for absorption of residual oil, oil vapours and aerosols with < 0,005 mg/m3 from compressed air according to ISO 8573-1 class 1. Body with easily...
Replacement basic filter cartridge with 3 µm filtration capacity for OMEGA AIR AAFP-1500 and AAFP-1680. Recommended replacement 12 months or every 4,000 MH and when clogging of...
Replacement cyclone cartridge for liquid water filtration AAFC-1500V. Recommended replacement 12 months or every 4,000 MH and upon indication of clogging of the filter element...
Replacement dust filter cartridge with 1 µm filtration capacity for OMEGA AIR AAFR-120 filter. Recommended replacement 12 months or every 4,000 MH and when clogging of the...
Replacement microfiltration cartridge with filtration capacity of 0.01 µm for OMEGA AIR AAFS-2160 microfilters. Recommended replacement 12 months or every 4,000 MH and when...
Replacement filter with activated carbon AAFA for OMEGA AIR AAFA-510. Absorption of residual oil, oil vapours and aerosols with a content of < 0.005 mg/m³ from compressed air...
Replacement filter with activated carbon AAFA2 for OMEGA AIR AAFA2-120. Use as a filter to remove residual oil content of oil vapours and aerosols with < 0.005 mg/m3from...
Replacement fine filter cartridge with 0.1 µm filtration capacity for OMEGA AIR AAFM-120 pre-filter. Recommended replacement 12 months or every 4,000 MH and when clogging of the...
Replacement filter with activated carbon AAFA for OMEGA AIR AAFA-1000. Absorption of residual oil, oil vapours and aerosols with a content of < 0.005 mg/m³ from compressed air...
Replacement filter with activated carbon AAFA for OMEGA AIR AAFA-120. Absorption of residual oil, oil vapours and aerosols with a content of < 0.005 mg/m³ from compressed air...
After one year of operation, the ADRY-105 series Omega Air adsorption dryer service KIT includes a replacement microfilter cartridge, dust filter and replacement silencers for...
After one year of operation, the service KIT for the Omega Air ADRY-60 to ADRY-75 series adsorption dryer includes a replacement microfilter cartridge, dust filter and...
AFSS silicone-free microfilter with G3/8" connection thread designed for industrial painting applications, eliminates paint deteriorating contaminants. Filtration capacity 0,01...
Electronic condensate drain from a compressed air system up to 16 bar, operating on a timed valve switching. External mounting on the filter body using a 1/2" thread. Simple...
precision compressed air pressure regulator DRF31-3GS with a flow rate of 540 l/min. Control range 0.5 to 10 bar. Inlet pressure up to 16 bar and connection via 1/4" thread....
precision compressed air pressure regulator with 0.05 - 7 bar control. Inlet pressure up to 16 bar with a maximum flow rate of 950 l/min. Connection via 1/4". High-performance...
The extremely quiet and dust-free operation of the compressed air condensation dryer up to a flow rate of 12 m³/hr from the compressor at a 3°C dew point enables use in...
The FDRY-6500 Adsorption Dryer is designed for continuous separation of water vapour from compressed air with a flow rate of up to 84,500 l/min at a maximum pressure of 16 bar...
The FDRY-3750 Adsorption Dryer is designed for continuous separation of water vapour from compressed air with a flow rate of up to 48,750 l/min at a maximum pressure of 16 bar...
Complete unit 2-piece pressure regulator assembly with filter and oiler in one unit. Designed for compressed air and neutral gases. Design according to ATEX II 2G2D. Maximum...
Basic 5 um air filter with 1/4" connection for compressed air and for neutral gases with a flow rate of 2,200 l/min. Design according to ATEX II 2G2D. Maximum inlet pressure 1,5...
AAFB coarse filter in 3/8" design to remove the largest mechanical impurities up to 15 um from compressed air according to ISO 8573-1 class 7. Body with easily removable...
Futura Treatment Units - Compressed Air Pressure Regulators, Designed for compressed air with or without oil and for neutral gases, Designed according to ATEX II 2G2D, Maximum...
Replacement filter cartridge 5 um for basic filter of FUTURA series - F14-F and F38-F. The filter insert can be easily replaced.
Service KIT 2 years of operation of the adsorption dryer Omega Air series ADRY-200 includes a replacement filter cartridge ;microfilter, dust filter and replacement silencer,...
The ADRY-150 Series Adsorption Dryer was designed for continuous separation of water vapor from compressed air at flow rates up to 2,500 l/min. Reduces the pressure dew point...
The FDRY-5000 Adsorption Dryer is designed for continuous separation of water vapour from compressed air with a flow rate of up to 65,000 l/min at a maximum pressure of 16 bar...
Replacement filter cartridge 5 um for basic filter of FUTURA series - F382-F, F12-F. The filter insert can be easily replaced.
Replacement dust filter cartridge with 1 µm filtration capacity for OMEGA AIR AAFR-335. Recommended replacement 12 months or every 4,000 MH and when clogging of the filter...
AAFS 2" microfilter for removal of micro impurities up to 0.01 um from compressed air according to ISO 8573-1 class 1. Body with easily removable container and designed for a...
precision compressed air pressure regulator DRF31-3GS with a flow rate of 540 l/min. Control range 0.2 to 6 bar. Inlet pressure up to 16 bar and connection via 1/4" thread....
AAFP basic filter in 1 1/2" design for removal of basic mechanical impurities up to 3 um from compressed air according to ISO 8573-1 class 6. Body with easily removable...
Cyclone separator SFH with flange connection DN200. It enables inexpensive and effective removal of water and impurities from compressed air. Working pressure 16 bar, working...
FUTURA Treatment Units - Hub Modules, Designed for compressed air and neutral gases, Design ATEX II 2G2D, Operating temperature -10°C to +50°C, Materials : body - Grivory...
AAFP basic filter in 1/4" design for removal of basic mechanical impurities up to 3 um from compressed air according to ISO 8573-1 class 6. Body with easily removable container...
Replacement dust filter cartridge with 1 µm filtration capacity for OMEGA AIR AAFR-1000. Recommended replacement 12 months or every 4,000 MH and when clogging of the filter...
Replacement fine filter cartridge with 0.1 µm filtration capacity for OMEGA AIR AAFM-780 pre-filter. Recommended replacement 12 months or every 4,000 MH and when clogging of the...
After one year of operation, the service KIT for the Omega Air adsorption dryer series ADRY-150 to ADRY-200 includes a replacement microfilter cartridge, dust filter and...
The ADRY-36 series adsorption dryer has been designed for continuous separation of water vapour from compressed air at flow rates up to 600 l/min. Reduces the pressure dew point...