Filtration, regulation and treatment of compressed air, Page 8
Product sorting
List of products
precision compressed air pressure regulator DRF31-3GS with a flow rate of 540 l/min. Control range 0.2 to 6 bar. Inlet pressure up to 16 bar and connection via 1/4" thread....
Basic 5 um air filter with 1/4" connection for compressed air and for neutral gases with a flow rate of 2,200 l/min. Design according to ATEX II 2G2D. Maximum inlet pressure 1,5...
The SFS filter with DN80 flange connection is designed for highly efficient filtration of compressed air, process air and industrial gases. Filtration capacity less than 0.01 um...
The SPFM microfilter with G2 1/2" connection thread is designed for highly efficient filtration of compressed air, process air and industrial gases. Filtration capacity up to...
WFITM microfilter with flange connection DN65 for use in areas with high corrosive environments. Filtration capacity up to 0.01 um. Maximum working pressure up to 16 bar,...
Prefilter WFITI1 with flange connection DN65 for use in areas with high corrosive environments. Filtration capacity up to 1 um. Maximum working pressure up to 16 bar, maximum...
Pre-filter WFITN25 with flange connection DN65 for use in areas with high corrosive environments. Filtration capacity up to 25 um. Maximum working pressure up to 16 bar,...
Pre-filter WFITN5 with flange connection DN65 for use in areas with high corrosive environments. Filtration capacity up to 5 um. Maximum working pressure up to 16 bar, maximum...
The SPFN25 pre-filter with G2 1/2" connection thread is designed for highly efficient filtration of compressed air, process air and industrial gases. Filtration capacity up to...
The SPFN5 pre-filter with G2 1/2" connection thread is designed for highly efficient filtration of compressed air, process air and industrial gases. Filtration capacity up to 5...
SPFS sterile filter with G2 1/2" connection thread for highly efficient filtration of compressed air, process air and industrial gases. Filtration capacity less than 0.01 um...
Sterile pre-filter SPFI1 with G2 1/2" connection thread for high efficiency filtration of compressed air, process air and industrial gases. Filtration capacity up to 1 um....
Futura Treatment Units - Compressed Air Pressure Regulators, Designed for compressed air with or without oil and for neutral gases, Designed according to ATEX II 2G2D, Maximum...
Service KIT after 4 years of operation of the adsorption dryer Omega Air BDRY-300 series includes a replacement microfilter cartridge, dust filter and replacement silencers, a...
Replacement dust filter cartridge with 1 µm filtration capacity for OMEGA AIR AAFR-510 filter. Recommended replacement 12 months or every 4,000 MH and when clogging of the...
The extremely quiet and dust-free operation of the compressed air condensation dryer up to a flow rate of 225 m³/hr from the compressor at a 3°C dew point allows use in...
The BDRY-1000 Adsorption Dryer is designed for continuous separation of water vapour from compressed air with a flow rate of up to 13,067 l/min at a maximum pressure of 16 bar...
Cyclone separator CSSS with flange connection DN80. It enables inexpensive and effective removal of water and impurities from compressed air. Working pressure 16 bar, working...
The extremely quiet and dust-free operation of the compressed air condensation dryer up to a flow rate of 144 m³/hr from the compressor at a 3°C dew point allows for use in...
Replacement basic filter cartridge with 3 µm filtration capacity for OMEGA AIR AAFP-2760 filter. Recommended replacement 12 months or every 4,000 MH and when clogging of the...
Futura Treatment Units - Compressed Air Pressure Regulators, Designed for compressed air with or without oil and for neutral gases, Designed according to ATEX II 2G2D, Maximum...
Futura Treatment Units - Compressed Air Pressure Regulators, Designed for compressed air with or without oil and for neutral gases, Designed according to ATEX II 2G2D, Maximum...
Futura Treatment Units - Compressed Air Pressure Regulators, Designed for compressed air with or without oil and for neutral gases, Designed according to ATEX II 2G2D, Maximum...
The TAC-600 dry separator is designed to separate oil vapours from compressed air using activated carbon from the compressor up to a flow rate of 9,833 l/min at a maximum...
The extremely quiet and dust-free operation of the compressed air condensation dryer up to a flow rate of 180 m³/hr from the compressor at a 3°C dew point enables use in...
Futura Treatment Units - Compressed Air Pressure Regulators, Designed for compressed air with or without oil and for neutral gases, Designed according to ATEX II 2G2D, Maximum...
Futura Treatment Units - Compressed Air Pressure Regulators, Designed for compressed air with or without oil and for neutral gases, Designed according to ATEX II 2G2D, Maximum...
Futura Treatment Units - Compressed Air Pressure Regulators, Designed for compressed air with or without oil and for neutral gases, Designed according to ATEX II 2G2D, Maximum...
Futura Treatment Units - Compressed Air Pressure Regulators, Designed for compressed air with or without oil and for neutral gases, Designed according to ATEX II 2G2D, Maximum...
Futura Treatment Units - Compressed Air Pressure Regulators, Designed for compressed air with or without oil and for neutral gases, Designed according to ATEX II 2G2D, Maximum...
Filter support for MDX400 to 1800 condensation dryers for easy installation of filters without the need for expensive fittings. Easy assembly when installing the dryer. The...
Service KIT after 4 years of operation Omega Air adsorption dryer ADRY-105 series includes replacement filter cartridges, silencers, check valve, gaskets, valve kit, adsorbent...
The SFS filter with DN65 flange connection is designed for highly efficient filtration of compressed air, process air and industrial gases. Filtration capacity less than 0.01 um...
WFITM microfilter with G3" connection thread for use in areas with high corrosive environments. Filtration capacity up to 0.01 um. Maximum working pressure up to 12 bar,...
PFI pre-filter with G2 1/2" connection thread for use in areas with high corrosive environments. Filtration capacity up to 1 um. Maximum working pressure is 16 bar, maximum flow...
Welded PFW pre-filter with G2 1/2" connection thread for use in areas with high corrosive environments. Filtration capacity up to 1 um. Maximum working pressure is 16 bar,...
Pre-filter WFITI1 with connection thread G2 1/2" for use in areas with high corrosive environment. Filtration capacity up to 1 um. Maximum working pressure up to 16 bar,...
WFITN pre-filter with G2 1/2" connection thread for use in areas with high corrosive environments. Filtration capacity up to 25 um. Maximum working pressure up to 16 bar,...
Prefilter WFITN5 with G2 1/2" connection thread for use in areas with high corrosive environments. Filtration capacity up to 5 um. Maximum working pressure up to 16 bar, maximum...
PFN25 screen filter with G2 1/2" connection thread for use in areas with high corrosive environments. Filtration capacity up to 25 um. Maximum working pressure is 16 bar,...