Kompresory Vzduchotechnika, Page 2
Product sorting
List of products
Metal B2 compressed air lubricator (air line oiler) with a G 1/4" thread, inlet pressure up to 18 bar and a flow of 1750 l/min. The oil dose is set with the screw on top;...
Metal B2 compressed air microfilter with a G 1/2" thread and 0.01 µm filtration for pressure up to 18 bar. Flow 4300 l/min, manual condensate drain. It is always installed after...
Metal B2 compressed air microfilter with a G 3/8" thread and 0.01 µm filtration for pressure up to 18 bar. Flow 4300 l/min, manual condensate drain. It is always installed after...
Metal B2 compressed air microfilter with a G 1/4" thread and 0.01 µm filtration for pressure up to 18 bar. Flow 1750 l/min, manual condensate drain. It is always installed after...
Metal B2 compressed air filter with a G 3/4" thread and 20 µm filtration for pressure up to 18 bar. Flow 11000 l/min, manual condensate drain that can be replaced with the B2FD...
Metal B2 compressed air filter with a G 1/2" thread and 20 µm filtration for pressure up to 18 bar. Flow 4300 l/min, manual condensate drain that can be replaced with the B2FD...
Metal B2 compressed air filter with a G 3/8" thread and 20 µm filtration for pressure up to 18 bar. Flow 4300 l/min, manual condensate drain that can be replaced with the B2FD...
Metal B2 compressed air filter with a G 1/4" thread and 20 µm filtration for pressure up to 18 bar. Flow 1750 l/min, manual condensate drain that can be replaced with the B2FD...
B2 filter regulator (pressure regulator with filter) with a G 1" thread: 20 µm filtration, setting 0 to 12 bar, inlet pressure up to 18 bar, flow 4600 l/min. Manual condensate...
B2 filter regulator (pressure regulator with filter) with a G 3/4" thread: 20 µm filtration, setting 0 to 12 bar, inlet pressure up to 18 bar, flow 4600 l/min. Manual condensate...
B2 filter regulator (pressure regulator with filter) with a G 1/4" thread: 20 µm filtration, setting 0 to 12 bar, inlet pressure up to 18 bar, flow 850 l/min. Manual condensate...
Metal B2 compressed air pressure regulator with a G 1" thread, inlet pressure up to 18 bar and a setting range of 0 to 12 bar. Flow 4600 l/min, painted aluminium and zamak body,...
Metal B2 compressed air pressure regulator with a G 3/4" thread, inlet pressure up to 18 bar and a setting range of 0 to 12 bar. Flow 4600 l/min, painted aluminium and zamak...
Miniature two-piece compressed air treatment unit: pressure regulator with 20 µm filter and lubricator. G 1/4" thread, working pressure up to 12 bar, flow 260 l/min. Gauge...
Miniature plastic compressed air lubricator with a G 1/4" thread for pressure up to 12 bar and a flow of 710 l/min. The oil mist dose is set with the screw on top; the bowl...
Miniature plastic compressed air filter with a G 1/4" thread for pressure up to 12 bar. Filter rating 20 µm, flow 1200 l/min, 16 cm³ bowl with manual condensate drain.
A replacement oil sight glass for a compressor with a G 1 1/4" pipe thread. Outer diameter 47 mm, window 30 mm, tightened with a 40.5 mm spanner. Transparent PA-T technopolymer...
A replacement oil sight glass for a compressor with a G 1" pipe thread. Outer diameter 40 mm, window 25 mm, tightened with a 34 mm spanner. Transparent PA-T technopolymer body,...
A replacement oil sight glass for a compressor with a G 3/4" pipe thread. Outer diameter 31.5 mm, window 20 mm, tightened with a 27 mm spanner. Transparent PA-T technopolymer...
A replacement oil sight glass for a compressor with a G 1/4" pipe thread. Outer diameter 18 mm, window 9 mm, tightened with a 15 mm spanner. Transparent PA-T technopolymer body,...
A long 2" rubber hose with a 90° elbow at one end for large compressor stations where the compressor stands further from the vessel. Working pressure 20 bar; swivel nuts and two...
A two-metre 2" rubber hose with one end bent at 90° for connecting a large compressor to an air receiver. Working pressure 20 bar, supplied with two male-thread adaptors.
A 2" rubber hose, 1.5 m long, with a 90° elbow at one end for the largest compressors and air receivers. Working pressure 20 bar; swivel nuts and two adaptors supplied.
A long 1 1/2" rubber hose with one end bent at 90° for connecting a compressor to an air receiver over a greater distance. Working pressure 20 bar, two adaptors supplied.
A two-metre 1 1/2" rubber hose with a 90° elbow at one end for larger compressor stations. Working pressure 20 bar; swivel nuts and two male-thread adaptors supplied.
A 1 1/2" rubber hose, 1.5 m long, with one straight end and a 90° elbow at the other for compressor stations. Working pressure 20 bar, two adaptors supplied.
A long 1 1/4" rubber hose with a 90° elbow at one end for connecting a more powerful compressor to an air receiver over a greater distance. Working pressure 20 bar; swivel nuts...
A two-metre 1 1/4" rubber hose with one end bent at 90° for more powerful compressors. Working pressure 20 bar, supplied with two male-thread adaptors.
A 1 1/4" rubber hose, 1.5 m long, with a 90° elbow at one end for larger compressor stations. Working pressure 20 bar; swivel nuts and two adaptors supplied.
A long 1" rubber hose with one end bent at 90° for a connection over a greater distance. Working pressure 20 bar; swivel nuts and two male-thread adaptors supplied.
A 1" rubber hose, 1.5 m long, with one straight end and a 90° elbow at the other for compressor stations. Working pressure 20 bar; swivel nuts and two adaptors supplied.
A two-metre 3/4" rubber hose with one end bent at 90° for connecting a compressor, air receiver and dryer. Working pressure 20 bar, two adaptors supplied.
A 3/4" rubber hose, 1.5 m long, with a 90° elbow at one end for connecting a compressor to an air receiver. Working pressure 20 bar; swivel nuts and two male-thread adaptors...
A one-metre 3/4" rubber hose with one straight end and a 90° elbow at the other for a short connection in a tight space. Working pressure 20 bar, two adaptors supplied.
A long 1/2" rubber hose with one end bent at 90° for connecting a compressor and an air receiver that do not stand side by side. Working pressure 20 bar; swivel nuts and two...
A two-metre 1/2" rubber hose with a 90° elbow at one end for smaller compressors and dryers. Working pressure 20 bar, supplied with two male-thread adaptors.
A 1/2" rubber hose, 1.5 m long, with one end bent at 90° for connecting a compressor, air receiver and dryer. Working pressure 20 bar; swivel nuts and two adaptors supplied.
A short 1/2" rubber hose with one straight end and a 90° elbow at the other for connecting a compressor to an air receiver in a tight space. Working pressure 20 bar, two...
A long 2" rubber hose with straight ends for large compressor stations where the compressor stands further from the vessel. Working pressure 20 bar; swivel nuts and two adaptors...