Compressor Pro Line Export A29BE-1.5-50CM, 50 l, 230 V motor power 1.5 kW, air displacement 178 l/min, pressure 10 bar, air receiver 50 l, voltage 230/50 V/Hz, 93 dB Lwa / 73 dB at 4 m
Code: A29BE-1-5-50CM
Related products
Product detailed description
50 l · 230 V · 178 l/minThe lightest machine in the range: 55 kg, 885 mm long. The A29BE-1.5-50CM pairs the A29B pump with a 1.5 kW motor for a 230 V socket: 178 l/min of displacement at 750 rpm, a 50 l tank at 10 bar, an aftercooler and a moulded belt guard as in the Extensive and Expert ranges. A belt-driven compressor the tradesman loads into the van and plugs into the first socket on site.
Why 1.5 kW and 50 l
The A29B pump runs at 750 rpm — slower than the A39B — and 178 l/min is enough for a stapler, a nail gun, tyre inflation and blowing off with pauses between bursts. The fifty fills quickly, and at 55 kg two people can lift the machine into a car; the 1.5 kW motor puts less load on an ordinary 230 V circuit than the 2.2 kW motor of the A39BE. If you sand or spray for longer at a stretch, take the A39BE or at least the 90 l tank. Noise 93 dB Lwa, 73 dB at 4 m.
Equipment and details
What the A29BE-1.5-50CM has from the factory
- single-stage oil-lubricated A29B pump with an oil sight glass, V-belt drive under a moulded belt guard, 750 rpm
- single-phase 1.5 kW (2 hp) electric motor, 230 V / 50 Hz, thermal overload protection; automatic stop/start pressure switch
- air displacement 178 l/min, 10 bar, aftercooler on the pump outlet
- horizontal 50 l tank with a ball valve for draining condensate
- pressure regulator, two gauges (tank and outlet) and a DN 7.2 quick coupling
- two front swivel castors with brakes, two fixed wheels at the rear, tubular handle
- noise 93 dB Lwa, 73 dB at 4 m
- AirTube QR code on the tank opens service videos; 2-year warranty, 10 years on the tank against rusting through
Machine details
Where next if the A29BE-1.5-50CM is not the right fit
The same pump with a bigger reserve is the A29BE-1.5-90CM; if you need more air, reach for the A39BE-2.2-50CM, with 355 l/min. All four machines side by side are on the Pro Line Export range page; fifty-litre machines of other brands are among compressors with a 50 l tank. Even lighter machines for a socket are the direct-drive L25P and L30P.
Values apply to a 50 Hz supply. Air displacement is the amount of air the pump draws in. Noise is given as the sound power level Lwa and the sound pressure at 4 m from the machine. A piston compressor works in cycles (topping up the tank and pausing), not continuously.
Ventilek advises
The lightest Export: 55 kg for the van, a pump from the Expert and, on every job, just an ordinary socket.
Additional parameters
| Category: | Compressors for all applications - hobby and industrial |
|---|---|
| Warranty: | 2 years |
| EAN: | 0745125779423 |
| Compressor type: | Piston compressor |
| Pressure: | 10 bars |
| Suction power: | 178 l/min |
| Displacement: | 125 l/min |
| Pressure vessel volume: | 50 L |
| Design of pressure vessel: | Lying down |
| Connecting: | Quick coupling DN 7.2 |
| Motor power: | 1.5 kW |
| Mains voltage: | 230/50 V/Hz |
| Speeds: | 750 ot/min |
| Number of cylinders: | 2 |
| Number of grades: | 1 – single-stage compressor |
| Lubrication: | Oleic |
| Noise: | 93 dB - Lwa|73 dB - Lwp(4m) |
| Weight: | 55 kg |
| Accessories: | Regulátor tlaku|Kolečka|Madlo|Rychlospojka |
| Engine: | Electric |
| Soundproofed: | No |
| Drive: | V-belts |
| Air dryer: | No |
| Retrieved from: | Professional |
| Development: | Mobile |
| In stock: | External warehouse |
| Length: | 885mm |
| Width: | 438 mm |
| Height: | 795 mm |
-
Produktový list (4.8 MB)
-
Katalogový list Pro Line — mobilní kompresory (4.8 MB)
-
Katalogový list Pro Line — mobilní kompresory
Instalace kompresoru
Odpouštění kondenzátu
Servisní KIT kompresoru a výměna
Údržba sacího filtru
Uvedení do provozu
Výměna oleje u kompresoru
Výměna řemenu
Product rating
Be the first who will post an article to this item!
Discussion
Be the first who will post an article to this item!
The company ABAC has been one of the most important manufacturers of piston compressors on the world market since its establishment in 1980 . Currently, the brand ABAC is owned by ATLAS COPCO, the largest compressor manufacturer in the world and is part of the multinational group PAD (Professional Air Division). The goal of the ABAC brand is to become a world leader in the development, production and sale of piston compressors.
Production at company ABAC
ABAC compressors are manufactured in 5 production centers around the world, with an annual production of almost 2 million compressors. The brand's parent plant ABAC in Turin, Italy employs around 250 employees and is primarily focused on the design and production of professional V-belt compressors with a daily production capacity of over 600 machines. The ABAC plant also has extensive warehouse facilities with several thousand compressors available for immediate delivery.
Innovative concept
ABAC does not only mean compressor production. We are directly involved in the development of key innovations and advanced solutions and set trends in the compressor market. The efforts of our designers have resulted in, for example, an aerodynamic pulley housing for temperature reduction of up to 35°C, the revolutionary XPAND hose reel compressor or the PRO LINE ZERO oil-free compressors with V-belts. In the ABAC program you will always find the most modern and unique solution for compressed air production on the market.
A modern solution
We are a modern company that is aware of the current trends around us. We are bringing advanced technologies to the compressor industry, such as the use of QR codes and the AIR TUBE app to make it easier for the user of our compressor to access the information they need. We use social media, chat and multimedia instead of traditional marketing and documentation formats. With compressors ABAC you will always have convenient access to all the necessary information.
Compressor program
In the supplier program of the ABAC brand you will find 100%. The basic range includes 100% from small portable compressors for home applications to larger stationary compressors for permanent deployment.
