WFIWI1 sintered stainless steel pre-filters up to 14 bar
The WFIWI1 sintered pre-filter has an element made of sintered stainless steel 1.4404 and traps solid particles larger than 1 µm. The element is made entirely of stainless steel and, like the housing, withstands up to +150 °C.
The WFIWI1 filter comes in 11 sizes (pipe ø 17.2 to 88.9 mm) with flows of 1,250 to 60,000 l/min at 7 bar; working pressure up to 14 bar. It is one of the stages of the WFIW filters — the housing is the same for all stages, only the element differs.
WFIWI1 filters by size
The size determines the connection and the flow. Each size has its own PF range spare element.
| WFIWI1 filters and spare elements by size | ||||||
|---|---|---|---|---|---|---|
| Filter | Connection | l/min at 7 bar | Nm³/h at 7 bar | Height A × diameter C | Weight | Spare element |
| WFIWI1-005 | welding end ø 17.2 mm | 1,250 | 75 | 202 × 76.1 mm | 1.8 kg | PFI1-005V |
| WFIWI1-010 | welding end ø 21.3 mm | 2,500 | 150 | 240 × 76.1 mm | 2 kg | PFI1-010V |
| WFIWI1-018 | welding end ø 26.9 mm | 3,750 | 225 | 254 × 76.1 mm | 2 kg | PFI1-018V |
| WFIWI1-030 | welding end ø 33.7 mm | 5,250 | 315 | 280 × 88.9 mm | 3 kg | PFI1-030V |
| WFIWI1-047 | welding end ø 42.4 mm | 7,000 | 420 | 337 × 88.9 mm | 3 kg | PFI1-047V |
| WFIWI1-070 | welding end ø 48.3 mm | 10,000 | 600 | 376 × 114.3 mm | 4.3 kg | PFI1-070V |
| WFIWI1-094 | welding end ø 60.3 mm | 15,000 | 900 | 457 × 114.3 mm | 4.8 kg | PFI1-094V |
| WFIWI1-150 | welding end ø 60.3 mm | 21,000 | 1,260 | 583 × 114.3 mm | 5.3 kg | PFI1-150V |
| WFIWI1-175 | welding end ø 76.1 mm | 28,000 | 1,680 | 740 × 139.7 mm | 9 kg | PFI1-175V |
| WFIWI1-200 | welding end ø 88.9 mm | 40,000 | 2,400 | 1,004 × 139.7 mm | 10.8 kg | PFI1-200V |
| WFIWI1-240 | welding end ø 88.9 mm | 60,000 | 3,600 | 1,029 × 168.3 mm | 16.2 kg | PFI1-240V |
The flows apply to a pressure of 7 bar and a temperature of +20 °C. Dimensions according to the manufacturer’s technical data sheet; you will find further data on the product page of each filter.
#showmore#
When to use it
The sintered pre-filter is suitable where the air is warmer: the stainless steel element withstands up to +150 °C, microfibre elements only +120 °C. It does not trap oil; the manufacturer does not state an ISO 8573-1 class for it.
Where to place it
After the WFIWN5 basic filter or the WFIWP fibre pre-filter, before the WFIWM fine pre-filter.
Flow by pressure
The catalogue flows apply to a pressure of 7 bar and a temperature of +20 °C. At a different pressure, they are multiplied by the correction factor: 1.88 at 14 bar.
| WFIWI1 filter flow in l/min by pressure | ||||
|---|---|---|---|---|
| Size (connection) | 4 bar | 7 bar | 10 bar | 14 bar |
| 005 (welding end ø 17.2 mm) | 788 | 1,250 | 1,725 | 2,350 |
| 010 (welding end ø 21.3 mm) | 1,575 | 2,500 | 3,450 | 4,700 |
| 018 (welding end ø 26.9 mm) | 2,363 | 3,750 | 5,175 | 7,050 |
| 030 (welding end ø 33.7 mm) | 3,308 | 5,250 | 7,245 | 9,870 |
| 047 (welding end ø 42.4 mm) | 4,410 | 7,000 | 9,660 | 13,160 |
| 070 (welding end ø 48.3 mm) | 6,300 | 10,000 | 13,800 | 18,800 |
| 094 (welding end ø 60.3 mm) | 9,450 | 15,000 | 20,700 | 28,200 |
| 150 (welding end ø 60.3 mm) | 13,230 | 21,000 | 28,980 | 39,480 |
| 175 (welding end ø 76.1 mm) | 17,640 | 28,000 | 38,640 | 52,640 |
| 200 (welding end ø 88.9 mm) | 25,200 | 40,000 | 55,200 | 75,200 |
| 240 (welding end ø 88.9 mm) | 37,800 | 60,000 | 82,800 | 112,800 |
Element, condensate drainage and maintenance
A PF range element is fitted in the housing — for example, the PFI1-010V for the WFIWI1-010. The same element also fits the PFI1-010, HPFI1-010, WFITI1-010, WFIFI1-010 and WHFITI1-010. Element working temperature +1.5 to +150 °C.
The filter is supplied with an element, without a condensate drain. For WFIW filters, the manufacturer offers the AOK20SS stainless steel float drain up to 20 bar and +65 °C and, for the head, the MDHI 50-K differential pressure gauge. The drain outlet in the bottom has a G 1/2" thread.
Replace the element at least once every 12 months. Once a year, also check the housing for visible damage.
Accessories for WFIWI1 filters
MDHI 50-K gauge
Differential pressure gauge with connecting tubes; it shows how clogged the element is.
The same stage in other ranges
Stage I1 also comes in the PFI1 filters up to 14 bar, HPFI1 filters up to 50 bar, WFITI1 filters up to 14 bar, WFIFI1 filters up to 14 bar and WHFITI1 filters up to 50 bar. The elements are the same for all ranges.
Ventilek’s tip
Stainless steel up to +150 °C. The sintered element is made of stainless steel 1.4404 and withstands the same temperature as the housing. For oil aerosol, a fine pre-filter M goes after it.
- What filtration rating does the WFIWI1 pre-filter have?
- The element traps particles larger than 1 µm. The manufacturer does not state an ISO 8573-1 class for it.
- Does it also trap oil?
- No. Oil aerosol is handled by the fine pre-filter M.
- What temperature does it withstand?
- The element and the housing up to +150 °C.
- When should the element be replaced?
- At least once every 12 months.
Bestsellers
Product sorting
List of products
With a ø 17.2 mm pipe connection and a flow of 1,250 l/min at 7 bar, the WFIWI1-005 sintered pre-filter traps solid particles larger than 1 µm. Working pressure up to 14 bar,...
With a ø 21.3 mm pipe connection and a flow of 2,500 l/min at 7 bar, the WFIWI1-010 sintered pre-filter traps solid particles larger than 1 µm. Working pressure up to 14 bar,...
With a ø 26.9 mm pipe connection and a flow of 3,750 l/min at 7 bar, the WFIWI1-018 sintered pre-filter traps solid particles larger than 1 µm. Working pressure up to 14 bar,...
With a ø 33.7 mm pipe connection and a flow of 5,250 l/min at 7 bar, the WFIWI1-030 sintered pre-filter traps solid particles larger than 1 µm. Working pressure up to 14 bar,...
With a ø 42.4 mm pipe connection and a flow of 7,000 l/min at 7 bar, the WFIWI1-047 sintered pre-filter traps solid particles larger than 1 µm. Working pressure up to 14 bar,...
With a ø 48.3 mm pipe connection and a flow of 10,000 l/min at 7 bar, the WFIWI1-070 sintered pre-filter traps solid particles larger than 1 µm. Working pressure up to 14 bar,...
With a ø 60.3 mm pipe connection and a flow of 15,000 l/min at 7 bar, the WFIWI1-094 sintered pre-filter traps solid particles larger than 1 µm. Working pressure up to 14 bar,...
With a ø 60.3 mm pipe connection and a flow of 21,000 l/min at 7 bar, the WFIWI1-150 sintered pre-filter traps solid particles larger than 1 µm. Working pressure up to 14 bar,...
With a ø 76.1 mm pipe connection and a flow of 28,000 l/min at 7 bar, the WFIWI1-175 sintered pre-filter traps solid particles larger than 1 µm. Working pressure up to 14 bar,...
With a ø 88.9 mm pipe connection and a flow of 40,000 l/min at 7 bar, the WFIWI1-200 sintered pre-filter traps solid particles larger than 1 µm. Working pressure up to 14 bar,...
With a ø 88.9 mm pipe connection and a flow of 60,000 l/min at 7 bar, the WFIWI1-240 sintered pre-filter traps solid particles larger than 1 µm. Working pressure up to 14 bar,...