ATMOS SEC 372 - Screw Compressor input power 37 kW, capacity 6.3 m³/min, 8 bar, without tank, LOGIK 26-S, 7-year warranty
Code: SEC372Product detailed description

ATMOS SEC 372 - Screw Compressor
ATMOS SEC 372 is the 37 kW top model of the SEC range with the premium ATMOS A 150 airend. Free air delivery 6.3 m³/min at 8 bar (10 bar → 5.4 / 13 bar → 4.5 m³/min). For the largest manufacturing plants with constant high consumption.
37 kW IE3 motor (efficiency 92.2%). A 150 airend with higher compression efficiency. Fixed-speed operation (without Vario) — suitable for operations with high constant consumption, where Vario control does not bring savings. Noise level 66 dB(A). Weight 720 kg.
SEC 372 configuration
Specifically, this variant consists of:

✓ Screw compressor
Atmos A 150 screw element — ample power reserve.

— Inverter
Fixed-speed mode (direct drive)

— External air receiver
Connection to existing compressed air network (air receiver 270/500/900 l separately)

— External dryer
Refrigerant dryer as an external unit (optional)
Main features
ATMOS screw block
Large block with ample power reserve, in-house production in Chrást, 3D dimensional inspection.
IE3 motor (high efficiency)
IE3 class motor with higher efficiency than standard IE2 — lower operating costs.
Enclosure 66 dB(A)
Sound-insulated steel enclosure, oversized cooler in the upper section.
LOGIK 26-S control system
Microprocessor control, ATMOS Care monitoring, RS-485 (Modbus).
37 kW · 6.3 m³/min
Working pressure 8/10/13 bar (optional at production). Rated voltage 400 V / 50 Hz.
7-year UNLIMITED warranty
Unique in the Czech Republic — regardless of operating hours. Czech product by ATMOS Chrást since 1899.
Design and features of SEC 372
Premium airend ATMOS A 150 + 37 kW IE3 motor (efficiency 92.2%). The machine benefits from high constant consumption — no inverter, no Vario control. Multi-V belt drive, IP 55, oversized cooler.

Design and noise level — 66 dB(A)
Komfort Premium design — soundproof steel canopy, noise level 66 dB(A) (premium A 150 airend). Motor protection class IP 55. Service access from three sides.
Technical data SEC 372
BASIC DATA — SEC 372 | |
|---|---|
| Nominal motor power | 37 kW (IE3 efficiency) |
| Working pressure (variants) | 8 / 10 / 13 bar |
| Nominal air delivery | 6.3 / 5.4 / 4.5 m³/min |
| Rated voltage | 400 V / 50 Hz |
| Motor speed | 2940 min⁻¹ |
| Motor efficiency | 92.2 % (IE3) |
| Motor protection class | IP 55 |
| Noise level (ISO 2151) | 66 dB(A) |
| Oil fill volume | 11 l |
| Compressed air outlet | G 1" |
| Protection | 80 A |
| Working environment temperature | +5 ÷ +40 °C |
| Weight | 720 kg |
| Dimensions (L × W × H) | 1300×920×1270 mm |
SEC 372 DESIGN | |
| Body | Noise-reducing steel (Komfort) |
| Screw airend | Atmos A 150 (manufactured in-house by ATMOS, 3D measurement) |
| Inverter | None (fixed-speed mode) |
| Control unit | LOGIK 26-S (microprocessor) + RS-485 |
| ATMOS Care | Integrated service interval monitoring |
| Warranty | 7 years UNLIMITED — regardless of operating hours |
| Manufacturer | ATMOS Chrást, CZ (since 1899) |

Who SEC 372 is suitable for
SEC 372 is purchased by the largest industrial plants with constant high consumption. Typical customer: extensive production halls with continuous 24/7 operation, forges with constant pneumatic operation, automotive plants with continuous line operation.

Typical applications
- Extensive production halls with 24/7 continuous operation
- Forges with constant pneumatic operation (3+ shifts)
- Automotive plants with continuous operation of assembly lines
- Large plastics plants with 8+ injection molding machines
- Paint shops with continuous operation of several booths
- Central compressed air station of industrial parks

7-year UNLIMITED warranty — unique in the Czech Republic
"We simply trust our machines! The best way to express confidence in the quality of our machines is to provide a SEVEN-YEAR UNLIMITED WARRANTY."
- No flat-rate payments
- No service contracts
- 7 years without worries
- 7 years of operating certainty
- Online management via the ATMOS Plus app
Optional equipment — built-in heat recovery

For the SEC 372, built-in heat recovery is available as an optional accessory. The heat recovery exchanger captures the heat generated by the compressor during air compression and transfers it to a water circuit (heating, domestic hot water heating).
- Recovers up to 72% of input electrical energy
- Built-in solution — integrated directly into the housing
- Return on investment typically within 1 year of operation
- Surcharge CZK 57,375 excl. VAT (CZK 69,424 incl. VAT)
Price according to the current ATMOS price list valid from 1 December 2025. Contact us for a non-binding calculation proposal.
Machine control — LOGIK 26-S

LOGIK 26-S controls operation. Master/Slave for 2 compressors as 1 source. ARCHON master system for 3–9 compressors. RS-485 (Modbus) for remote management.
- Operating hours monitoring
- Master/Slave mode for 2 compressors as 1 source
- Activity and fault logs (50 days of history)
- Data transfer via RS-485 (Modbus) bus
- ATMOS Care — automatic reporting of service intervals
Accessories — option: ARCHON master control system

For compressor stations with 3, 5 or 9 compressors, the ARCHON master control system is available. The way a compressor station with multiple compressors is controlled has a fundamentally important effect on its overall efficiency.
- Up to 10 daily programs — different operating modes for working days / weekends / holidays
- 3 control methods: by engine hours (even wear), by fixed priorities (backup machines), for highest efficiency (energy saving)
- SIEMENS SIMATIC touch panel with a clear display of the status of all compressors
- Communication with LOGIK 26-S via Ethernet / RS-485 for remote management
ARCHON is an optional accessory — for a non-binding calculation proposal for a compressor station, contact us.
Related models and alternatives
If the SEC SEC372 does not exactly match your operation, take a look at the following alternatives:
SEC 302 (22 kW)
Lower output in the same industrial class
SEC 372 Vario
Vario version — 20–30% energy savings
SmartTronic ST 30+
Premium class ATMOS 30 kW — flagship for 24/7
Frequently asked questions
- What is the difference between SEC 300 and SEC 302?
- With the same 30 kW motor, SEC 302 has a higher delivery rate (5.2 vs 4.5 m³/min at 8 bar) thanks to the new Atmos A 150 screw airend (vs B 100 in SEC 300). It also has significantly lower noise level — 65 dB(A) vs 75 dB(A). SEC 302 is the premium 30 kW version.
- What does Vario mean in the model name?
- Vario denotes a compressor with a Danfoss VLT frequency inverter, which smoothly regulates the screw element speed according to current demand. It eliminates idle running and saves 20–30% of electrical energy compared to a fixed-speed machine. Vario versions are ideal for operations with intermittent or variable consumption.
- Can I choose a different working pressure than the standard 8 bar?
- Yes. The SEC 220 is available in 8 or 10 bar versions. The SEC 221 and all larger models (SEC 300+, SEC 302+, SEC 372+) are available in 8 / 10 / 13 bar variants. At higher pressure, the flow rate in m³/min decreases — see the technical parameters table.
- Do SEC compressors have an integrated air receiver?
- No. All SEC models (150 to 372) are supplied as freestanding industrial machines. The air receiver is an external accessory — available in 270 / 500 / 900 / 1000 l variants. We recommend sizing the air receiver at 4–6× the nominal air delivery per minute to balance pressure peaks.
- What screw block is used in the individual models?
- SEC 220 → Atmos AB 240 (low-speed). SEC 221 and 300 + Vario → Atmos B 100 (high-speed, 4–6 thousand rpm via belt). SEC 302 and 372 + Vario → Atmos A 150 (new premium block with higher performance and lower noise).
- What is ARCHON?
- ARCHON is a master ATMOS control system for coordinating 3, 5 or 9 compressors as a single source of compressed air. It offers 10 daily programs + 3 control methods (operating hours / priorities / highest efficiency). Including Ethernet for remote management.
- What does heat recovery enable?
- The compressor generates compression heat, which is normally lost to the surroundings through cooling. The ATMOS heat recovery exchanger captures this heat and transfers it to a water circuit (heating, domestic hot water heating). Up to 72% of the input electrical energy can be recovered — the return on investment is typically 1 year.
Additional parameters
| Category: | SEC |
|---|---|
| Warranty: | 7 let |
| Compressor type: | Screw compressor |
| Version: | Screw compressor |
| Pressure: | 13 bar |
| Air delivery: | 6,300 l/min |
| Pressure vessel volume: | It isn't |
| Connecting: | 1" |
| Motor power: | 37 kW |
| Mains voltage: | 400/50 V/Hz |
| Lubrication: | Oleic |
| Noise: | 66 dB(A) |
| Engine: | Electric |
| Soundproofed: | Yes |
| Drive: | Direct |
| Air dryer: | No |
| Retrieved from: | Professional |
| Development: | Stationary |
| Inverter: | No |
Product rating
Be the first who will post an article to this item!
ATMOS is a Czech family-owned compressor manufacturer, the company ATMOS Chrást s.r.o. from Chrást near Pilsen. It makes screw and piston compressors, its own screw blocks and generator sets, and besides stationary machines also mobile and locomotive compressors. It makes the blocks and air receivers itself, assembles and tests the machines in Chrást and exports them to more than 100 countries.
Engineering production in Chrást began in 1899, compressors have been made here for more than 70 years, and in 2024 the company celebrated its 125th anniversary. In the socialist era the works belonged to the state enterprise Škoda Plzeň; screw compressors arrived in the 1980s, at first under licence, and more than 25 new types have been added since. With us you will find the Perfect piston series for the workshop and the Albert, SEC and SmartTronic screw series for continuous operation.
Made in the Czech RepublicATMOS compressor series
Perfect — piston compressors
Cast-iron pump unit for the workshop. The cast-iron pump unit runs at low speed and copes with daily use. Since 2004 it has been working in tens of thousands of installations in the Czech Republic and abroad.
- 2.2 to 7.5 kW, 310 to 1,170 l/min
- horizontal or vertical receiver, 90 to 500 l
- two-stage machines for 12.5 and 14 bar
Albert — screw, 4 to 22 kW
From a small workshop to light production. The slow-running B100 or B150 screw block is coupled directly to the motor, with no belt.
- Komfort in a soundproof steel enclosure
- air receiver and dryer on the machine
- Vario with a frequency inverter
SEC — industrial, 22 to 37 kW
For continuous operation in production. A free-standing machine in a soundproofed steel enclosure, the air receiver is chosen separately.
- pressure 8, 10 or 13 bar
- IE3 motors and ATMOS screw blocks
- Vario with a frequency inverter
SmartTronic — 30 to 110 kW
A compressor station in one cabinet. The ATMOS flagship series for large industrial plants.
- free air delivery up to 19.1 m³/min
- pressure 7.5 to 13 bar
- FD version with a built-in fusion dryer
Service kits and oil
Everything for one service. Original kits for Perfect compressors for the 1st to 4th year, chosen by the machine’s pump unit.
- oil with extractor, filter elements, check valve parts
- for the 2nd and 4th year also valve plates and belt
- ATMOS VDL 100 oil for piston machines
Not sure whether you need a piston or a screw compressor? The selection calculator in the Compressors category will help you find the right output.
Choose a compressorATMOS series side by side
| Design, motor, pressure and equipment | ||||
|---|---|---|---|---|
| Series | Design | Motor | Pressure | Equipment |
| Perfect | piston, cast-iron pump unit | 2.2–7.5 kW | 10 · 12.5 · 14 bar | 90–500 l receiver, PFT version without receiver |
| Albert | screw, block directly on the motor | 4–22 kW | up to 13 bar | Komfort enclosure, receiver, dryer, Vario inverter |
| SEC | screw, free-standing | 22–37 kW | 8 · 10 · 13 bar | soundproofed enclosure, Vario inverter |
| SmartTronic | screw compressor station | 30–110 kW | 7.5–13 bar | FD fusion dryer, Vario inverter |
A piston compressor needs breaks; the air receiver gives it time to cool down. A screw compressor can run continuously.
How to choose an ATMOS compressor
1. Add up consumption
Add up the air consumption of the tools that will run at the same time and allow a reserve of about 30 %. Work with the machine’s free air delivery, not its intake capacity.
2. Piston or screw
For intermittent use in a workshop or garage, a Perfect piston compressor is enough. Where the compressor runs for most of the shift, choose an Albert, SEC or SmartTronic screw compressor.
3. Pressure and receiver
Most tools need 10 bar; the two-stage Perfect machines deliver 12.5 and 14 bar. A large receiver pays off when tools draw air in bursts: the machine then switches on less often.
4. Dry air and maintenance
For dry, clean air add a dryer and filters; on screw machines the dryer can be built into the compressor. Service a Perfect piston compressor once a year with an original service kit.
Frequently asked questions
- Who makes ATMOS compressors?
- The Czech family-owned company ATMOS Chrást s.r.o. at its plant in Chrást near Pilsen, where engineering production has been running since 1899. In the socialist era the plant belonged to the state enterprise Škoda Plzeň; from that time comes, for example, the 1982 PKD12 piston compressor under the ŠKODA brand. ATMOS makes its own screw blocks and air receivers, and assembles and tests the machines in Chrást.
- What does Vario in the name mean?
- A Vario machine has a frequency inverter that smoothly adjusts the speed of the screw block to the current air demand. The compressor does not run idle and, with variable demand, saves 20 to 30 % of electricity.
- What do the letters in the Albert series mean?
- K = Komfort in a soundproof steel enclosure, V = air receiver, S = built-in refrigeration dryer. For example, the E.50 KVS is an E.50 in the enclosure, with a receiver and a dryer.
- Which Perfect can I plug into a 230 V socket?
- The Perfect 2,2/90 EX and the Perfect 2,2/150 EX. The other Perfect compressors need a three-phase 400 V socket.
- Which oil goes into a Perfect compressor?
- ATMOS VDL 100 mineral compressor oil. Depending on the machine, the fill is 1 to 2 litres, and the oil comes with an extractor in every service kit.
- What is the FD fusion dryer in the SmartTronic series?
- A dryer built directly into the compressor that uses the machine’s waste heat for regeneration. You set the pressure dew point on the controller between +5 and −20 °C. The five largest models have no FD version.
The operating manual for Perfect compressors can be downloaded from the machine’s product page. ATMOS is a brand of ATMOS Chrást s.r.o.
| Manufacturing company : | ATMOS Chrást s.r.o. |
|---|---|
| Address : | Plzeňská 149, 330 03 Chrást, Czech Republic |
| E-mail : | info@atmos-chrast.cz |