Clean Air CLR-1,5-30MS dental compressor motor power 1.5 kW, intake 350 l/min, delivery 155 l/min at 5 bar, pressure 8 bar, receiver 30 l, voltage 230/50 V/Hz
Code: CLR-1-5-30MS
Related products
Product detailed description
Clean Air CLR · canopy · 30 lOutput for two chairs and quiet in the surgery. The CLR-1,5-30MS has the pump and the thirty-litre receiver in an acoustic canopy, so it runs at 64 dB(A) at one metre instead of 74. The delivery of 155 l/min at 5 bar is enough, per the manufacturer, for two to three chairs. Weight 72 kg.
Ten decibels down
Between the open and the enclosed version this class differs by ten decibels — from 74 to 64 dB(A). That is roughly half the perceived loudness and the difference between "I hear it through the door" and "I hear it when I stand next to it".
The canopy holds a thirty-litre receiver inside, so it takes 650 × 440 mm and weighs 72 kg. Against the open fifty-litre machine that is 32 kilos more with a receiver twenty litres smaller.
Equipment and details
What the CLR-1,5-30MS does as standard
- oil-free pump unit — no oil can reach the air
- single-stage compressor, direct drive without belts, 1400 rpm
- 30 l pressure vessel with an epoxy coating inside, working pressure 8 bar
- cyclone water separator; a dryer can be added separately
- sound canopy with the receiver inside — 64 dB(A) at one metre
- intake 350 l/min, delivery 155 l/min at 5 bar
- capacity of 2–3 dental chairs per the manufacturer (50 l/min at 5 bar per chair)
- 1.5 kW motor on four anti-vibration mounts, electric motor 230/50 V/Hz — an ordinary socket
- DN 7.2 quick coupling, weight 72 kg, dimensions 650 × 440 × 760 mm
- two-year warranty
Machine detail
The pump and the thirty-litre receiver are enclosed in an acoustic canopy. That is why the machine runs at 64 dB(A) instead of 71 to 74 — and why it weighs some thirty kilos more than the open version.
Where to go if the CLR-1,5-30MS does not fit
With a dryer in the canopy it is the CLR-1,5-30MDS, the open version is the CLR-1,5-50M. A smaller machine in a canopy is the CLR-1,1-30MS. The full overview is in the overview of the whole category.
Delivery is the amount of air the machine supplies at 5 bar (FAD per the manufacturer leaflet); intake is the volume drawn in by the pump unit. The noise figure is the sound pressure at one metre from the machine; the sound power level Lwa is in the parameters. The capacity in chairs is calculated on 50 l/min at 5 bar per chair.
Ventilek advises
Inside the canopy both smaller classes are equally loud — 64 dB(A). So if you are choosing an enclosed machine, decide by the number of chairs; the noise figure will not help you.
Additional parameters
| Category: | Air compressors |
|---|---|
| Warranty: | 3 years |
| Compressor type: | Piston compressor |
| Pressure: | 8 bar |
| Suction power: | 350 l/min |
| Air delivery: | 155 l/min |
| Pressure vessel volume: | 30 L |
| Design of pressure vessel: | Integrated |
| Connecting: | Quick coupling DN 7.2 |
| Motor power: | 1.5 kW |
| Mains voltage: | 230/50 V/Hz |
| Speeds: | 1400 rpm |
| Number of cylinders: | 2 |
| Number of grades: | 1 – single-stage compressor |
| Lubrication: | Oil-free |
| Noise: | 85 dB - Lwa, 65 dB - Lwp(4m) |
| Dimensions: | 650 X 440 X 760 mm |
| Weight: | 72 kg |
| Accessories: | Silent blocks, Handle, Quick coupler |
| Engine: | Electric |
| Soundproofed: | Yes |
| Drive: | Direct |
| Air dryer: | No |
| Retrieved from: | Professional |
| Development: | Stationary |
Instalace kompresoru
Odpouštění kondenzátu
Servisní KIT kompresoru a výměna
Údržba sacího filtru
Uvedení do provozu
Výměna oleje u kompresoru
Výměna pístu a těsnění
Výměna sacího filtru a údržba zpětného ventilu
Product rating
Be the first who will post an article to this item!
The company ABAC has been one of the most important manufacturers of piston compressors on the world market since its establishment in 1980 . Currently, the brand ABAC is owned by ATLAS COPCO, the largest compressor manufacturer in the world and is part of the multinational group PAD (Professional Air Division). The goal of the ABAC brand is to become a world leader in the development, production and sale of piston compressors.
Production at company ABAC
ABAC compressors are manufactured in 5 production centers around the world, with an annual production of almost 2 million compressors. The brand's parent plant ABAC in Turin, Italy employs around 250 employees and is primarily focused on the design and production of professional V-belt compressors with a daily production capacity of over 600 machines. The ABAC plant also has extensive warehouse facilities with several thousand compressors available for immediate delivery.
Innovative concept
ABAC does not only mean compressor production. We are directly involved in the development of key innovations and advanced solutions and set trends in the compressor market. The efforts of our designers have resulted in, for example, an aerodynamic pulley housing for temperature reduction of up to 35°C, the revolutionary XPAND hose reel compressor or the PRO LINE ZERO oil-free compressors with V-belts. In the ABAC program you will always find the most modern and unique solution for compressed air production on the market.
A modern solution
We are a modern company that is aware of the current trends around us. We are bringing advanced technologies to the compressor industry, such as the use of QR codes and the AIR TUBE app to make it easier for the user of our compressor to access the information they need. We use social media, chat and multimedia instead of traditional marketing and documentation formats. With compressors ABAC you will always have convenient access to all the necessary information.
Compressor program
In the supplier program of the ABAC brand you will find 100%. The basic range includes 100% from small portable compressors for home applications to larger stationary compressors for permanent deployment.
