Clean Air CLR-2,0-50M dental compressor motor power 2 kW, intake 480 l/min, delivery 240 l/min at 5 bar, pressure 8 bar, receiver 50 l, voltage 230/50 V/Hz
Code: CLR-2-0-50M
Related products
Product detailed description
Clean Air CLR · oil-free · 2.0 kWAir for a whole clinic. The CLR-2,0-50M draws in 480 l/min and delivers 240 l/min at 5 bar — per the manufacturer four to five chairs. It stands on a fifty-litre receiver, compresses oil-free and runs on ordinary 230 V like the whole range. Weight 52 kg.
Twice the output of the smallest class
Between 1.1 and 2.0 kW the difference is 125 against 240 l/min — almost double. That is exactly why the manufacturer counts four to five chairs for this class instead of one to two.
The higher output is audible: 77 dB(A) at one metre is the highest figure in the range, and this class has no sound canopy. Plan for a plant room or a separate compressor room.
Equipment and details
What the CLR-2,0-50M does as standard
- oil-free pump unit — no oil can reach the air
- single-stage compressor, direct drive without belts, 1400 rpm
- 50 l pressure vessel with an epoxy coating inside, working pressure 8 bar
- cyclone water separator; a dryer can be added separately
- open design — 77 dB(A) at one metre
- intake 480 l/min, delivery 240 l/min at 5 bar
- capacity of 4–5 dental chairs per the manufacturer (50 l/min at 5 bar per chair)
- 2 kW motor on four anti-vibration mounts, electric motor 230/50 V/Hz — an ordinary socket
- DN 7.2 quick coupling, weight 52 kg, dimensions 640 × 470 × 890 mm
- two-year warranty
Machine detail
The open design leaves the pump, the cooler and the fittings accessible from above. Servicing and checking the drain take minutes, but the machine hides none of its noise.
Where to go if the CLR-2,0-50M does not fit
With a dryer it is the CLR-2,0-50MD. Smaller machines are the CLR-1,5-50M and the CLR-1,1-50M. The full overview is in the overview of the whole category.
Delivery is the amount of air the machine supplies at 5 bar (FAD per the manufacturer leaflet); intake is the volume drawn in by the pump unit. The noise figure is the sound pressure at one metre from the machine; the sound power level Lwa is in the parameters. The capacity in chairs is calculated on 50 l/min at 5 bar per chair.
Ventilek advises
With four or more chairs it is not only delivery that decides, but how often they draw at the same time. If all your chairs usually work at once, allow a reserve and take the version with a dryer — dry air matters even more at a higher flow.
Additional parameters
| Category: | Air compressors |
|---|---|
| Warranty: | 3 years |
| Compressor type: | Piston compressor |
| Pressure: | 8 bar |
| Suction power: | 480 l/min |
| Air delivery: | 240 l/min |
| Pressure vessel volume: | 50 L |
| Design of pressure vessel: | Standing |
| Connecting: | Quick coupling DN 7.2 |
| Motor power: | 2.0 kW |
| Mains voltage: | 230/50 V/Hz |
| Speeds: | 1400 rpm |
| Number of cylinders: | 4 |
| Number of grades: | 1 – single-stage compressor |
| Lubrication: | Oil-free |
| Noise: | 97 dB - Lwa, 77 dB - Lwp(4m) |
| Dimensions: | 640 X 470 X 890 mm |
| Weight: | 52 kg |
| Accessories: | Silent blocks, Handle, Quick coupler |
| Engine: | Electric |
| Soundproofed: | No |
| Drive: | Direct |
| Air dryer: | No |
| Retrieved from: | Professional |
| Development: | Stationary |
Instalace kompresoru
Odpouštění kondenzátu
Servisní KIT kompresoru a výměna
Údržba sacího filtru
Uvedení do provozu
Výměna oleje u kompresoru
Výměna pístu a těsnění
Výměna sacího filtru a údržba zpětného ventilu
Product rating
Be the first who will post an article to this item!
The company ABAC has been one of the most important manufacturers of piston compressors on the world market since its establishment in 1980 . Currently, the brand ABAC is owned by ATLAS COPCO, the largest compressor manufacturer in the world and is part of the multinational group PAD (Professional Air Division). The goal of the ABAC brand is to become a world leader in the development, production and sale of piston compressors.
Production at company ABAC
ABAC compressors are manufactured in 5 production centers around the world, with an annual production of almost 2 million compressors. The brand's parent plant ABAC in Turin, Italy employs around 250 employees and is primarily focused on the design and production of professional V-belt compressors with a daily production capacity of over 600 machines. The ABAC plant also has extensive warehouse facilities with several thousand compressors available for immediate delivery.
Innovative concept
ABAC does not only mean compressor production. We are directly involved in the development of key innovations and advanced solutions and set trends in the compressor market. The efforts of our designers have resulted in, for example, an aerodynamic pulley housing for temperature reduction of up to 35°C, the revolutionary XPAND hose reel compressor or the PRO LINE ZERO oil-free compressors with V-belts. In the ABAC program you will always find the most modern and unique solution for compressed air production on the market.
A modern solution
We are a modern company that is aware of the current trends around us. We are bringing advanced technologies to the compressor industry, such as the use of QR codes and the AIR TUBE app to make it easier for the user of our compressor to access the information they need. We use social media, chat and multimedia instead of traditional marketing and documentation formats. With compressors ABAC you will always have convenient access to all the necessary information.
Compressor program
In the supplier program of the ABAC brand you will find 100%. The basic range includes 100% from small portable compressors for home applications to larger stationary compressors for permanent deployment.
