Mobile compressor ABAC V30-2.2-20CM motor power 2.2 kW, air intake 330 l/min, pressure 10 bar, air receiver 20 l, voltage 230/50 V/Hz
Code: V30-2-2-20CM
Related products
Product detailed description
20 l · 1,450 rpm · 43 kgTwenty litres in a cage. The V30-2.2-20CM is the smallest low-speed V-twin in the range: a horizontal 20 l tank sits in a tubular frame that protects the pump and the panel in transit, and on top sits the same V30 pump at 1,450 rpm as on the ninety — 330 l/min and 10 bar from an ordinary socket. At 43 kg it is the lightest V30; two wheels, two rubber feet and an extended handle let you wheel it about like a sack truck.
Why such a strong pump on a twenty
A small tank does not reduce the output — the pump still delivers 330 l/min, only the reserve for a sudden draw is smaller. For a nailer, a stapler, blowing off or inflating, 20 l is plenty: the tank refills in half a minute or so and the low-speed pump does that all day without overheating. The frame around the machine is what you are paying for on the 20CM: in the van a crate can lean against it, on site it shields the gauges and the switch from a falling length of pipe. If you need a longer reserve for a sander or a spray gun, reach for the fifty.
Equipment and details
What the V30-2.2-20CM has from the factory
- oil-lubricated direct-drive V-twin V30 pump, 2.2 kW / 3 HP, 1,450 rpm
- four-pole single-phase 230 V / 50 Hz motor, thermal overload protection, large fan
- horizontal 20 l tank in a protective tubular frame, 10 bar, condensate drain valve underneath
- automatic stop/start pressure switch, outlet pressure regulator, two gauges, DN 7.2 quick coupling
- two wheels, two rubber feet, extended double handle
- oil sight glass on the outside, capacity roughly a quarter of a litre
- QR code on the tank opens service videos in the AirTube app
- 2-year warranty, 10 years on the tank
Machine details
Where next if the V30-2.2-20CM is not the right fit
The same pump with a bigger reserve is the V30-2.2-50CM — 17 kg heavier, but with a swivel castor and fifty litres for a sander. All five tanks side by side are on the V30 range page. If you want a light machine on wheels but do not need a low-speed V-twin, you will save money with the lighter L20N range. For the first service, add ALTAIR oil in a one-litre bottle.
Values apply to a 230 V / 50 Hz supply. The 97 dB Lwa noise figure is the sound power level, roughly 77 dB at 4 m from the machine. The machine is built for intermittent duty, not for continuous operation; the lead time is shown in the Availability line.
Ventilek advises
Twenty litres and a cage around them — this is the V30 for someone who carries it about, not for someone who sands next to it.
Additional parameters
| Category: | Air compressors |
|---|---|
| Warranty: | 2 years |
| EAN: | 8020119133606 |
| Compressor type: | Piston compressor |
| Pressure: | 10 bars |
| Suction power: | 330 l/min |
| Air delivery: | 257 l/min |
| Pressure vessel volume: | 20 L |
| Design of pressure vessel: | Integrated |
| Connecting: | Quick coupling DN 7.2 |
| Motor power: | 2.2 kW |
| Mains voltage: | 230/50 V/Hz |
| Speeds: | 1450 rpm |
| Number of cylinders: | 2 |
| Number of grades: | 1 – single-stage compressor |
| Lubrication: | Oleic |
| Noise: | 97 dB - Lwa, 77 dB - Lwp(4m) |
| Dimensions: | 520 × 430 × 790 mm |
| Weight: | 43 kg |
| Accessories: | Pressure regulator, Wheels, Handle, Quick coupler |
| Engine: | Electric |
| Soundproofed: | No |
| Drive: | Direct |
| Air dryer: | No |
| Retrieved from: | Semi-professional |
| Development: | Mobile |
Instalace kompresoru
Odpouštění kondenzátu
Servisní KIT kompresoru a výměna
Údržba sacího filtru
Uvedení do provozu
Výměna oleje u kompresoru
Výměna pístu a těsnění
Výměna sacího filtru a údržba zpětného ventilu
Product rating
Be the first who will post an article to this item!
The company ABAC has been one of the most important manufacturers of piston compressors on the world market since its establishment in 1980 . Currently, the brand ABAC is owned by ATLAS COPCO, the largest compressor manufacturer in the world and is part of the multinational group PAD (Professional Air Division). The goal of the ABAC brand is to become a world leader in the development, production and sale of piston compressors.
Production at company ABAC
ABAC compressors are manufactured in 5 production centers around the world, with an annual production of almost 2 million compressors. The brand's parent plant ABAC in Turin, Italy employs around 250 employees and is primarily focused on the design and production of professional V-belt compressors with a daily production capacity of over 600 machines. The ABAC plant also has extensive warehouse facilities with several thousand compressors available for immediate delivery.
Innovative concept
ABAC does not only mean compressor production. We are directly involved in the development of key innovations and advanced solutions and set trends in the compressor market. The efforts of our designers have resulted in, for example, an aerodynamic pulley housing for temperature reduction of up to 35°C, the revolutionary XPAND hose reel compressor or the PRO LINE ZERO oil-free compressors with V-belts. In the ABAC program you will always find the most modern and unique solution for compressed air production on the market.
A modern solution
We are a modern company that is aware of the current trends around us. We are bringing advanced technologies to the compressor industry, such as the use of QR codes and the AIR TUBE app to make it easier for the user of our compressor to access the information they need. We use social media, chat and multimedia instead of traditional marketing and documentation formats. With compressors ABAC you will always have convenient access to all the necessary information.
Compressor program
In the supplier program of the ABAC brand you will find 100%. The basic range includes 100% from small portable compressors for home applications to larger stationary compressors for permanent deployment.
