Compressed air treatment units: filter, regulator, lubricator, Page 4
-
P2 treatment units
-
Treatment units A2
-
B2 treatment units
-
I3 treatment units
-
I8 treatment units
-
Futura treatment units
-
Combibloc treatment units
-
Standard treatment units
-
Treatment units A1X
Bestsellers
Product sorting
List of products
Manifold module B2T-3 in size 3 for B2 units with 3/4" and 1" threads: four G 1/2" branch ports, dimensions 30 × 80 × 80 mm. It takes air from within the assembly, for example...
A replacement sintered 5 µm filter element for FUTURA filters and filter regulators, and also for the filters in units. The element gradually clogs. Replace it when the pressure...
Finer 5 µm filter element for plastic I3 units with G 1/8" and G 1/4" threads: FWA filters, FDM filter regulators and WE two-piece units.
A replacement bowl for FUTURA filters, filter regulators and units. Replace it when it is damaged or leaking. A damaged bowl may not safely withstand the pressure.
A bracket with screws for mounting a size 1 COMBIBLOC unit on a wall or in a machine frame. It screws onto the unit body; the unit then stands upright and the bowl can be...
Compact plastic I3 compressed air filter with a G 1/8" thread and a 20 µm element, inlet pressure up to 13 bar. Flow 1200 l/min, transparent 16 cm³ bowl with semi-automatic...
Replacement polycarbonate lubricator bowl for A2 units with a 1/4" thread: lubricator A2L-14 and air treatment unit A2U-14.
The mounting bracket with screws fixes a single FUTURA component to a wall or machine frame. Remove the rear cover plate of the component before mounting. The bracket holds the...
A replacement bowl for FUTURA filters, filter regulators and units. Replace it when it is damaged or leaking. A damaged bowl may not safely withstand the pressure.
A replacement bowl for FUTURA lubricators and units. It serves as a replacement for a damaged lubricator bowl.
A bracket with screws for mounting a size 2 COMBIBLOC unit on a wall or in a machine frame. It screws onto the unit body; the unit then stands upright and the bowl can be...
Two-piece plastic I3 compressed air treatment unit with a G 1/8" thread: pressure regulator with 20 µm filter and lubricator. Inlet pressure up to 13 bar, setting 0 to 8 bar,...
The connection kit joins two FUTURA components of the same size regardless of their thread. It contains two frames, screws and a sealing ring. This lets you assemble a unit from...
The connection kit with bracket joins two FUTURA components of the same size and at the same time fixes the unit to a wall. For an assembly of three to four components, two kits...
A replacement sealing ring for the bowl of a FUTURA filter, filter regulator or lubricator. Replace it when the bowl leaks or the ring is damaged.
A replacement knob for FUTURA pressure regulators and filter regulators. It serves as a replacement for a damaged or lost knob.
The connection kit with bracket joins two FUTURA components of the same size and at the same time fixes the unit to a wall. For an assembly of three to four components, two kits...
A replacement regulator diaphragm for a size 1 COMBIBLOC unit. If the regulator does not hold the set pressure or air escapes under the knob, a damaged diaphragm may be the cause.
A replacement bowl for FUTURA activated carbon filters. It has no drain, because the activated carbon filter does not drain condensate. It serves as a replacement for a damaged...
The connection kit joins two FUTURA components of the same size regardless of their thread. It contains two frames, screws and a sealing ring. This lets you assemble a unit from...
A replacement bowl for FUTURA activated carbon filters. It has no drain, because the activated carbon filter does not drain condensate. It serves as a replacement for a damaged...
A replacement element for FUTURA microfilters with 0.01 µm filtration. Replace it when the clogging indicator shows a large pressure difference or the pressure after the filter...
A replacement element for FUTURA microfilters with 0.01 µm filtration. Replace it when the clogging indicator shows a large pressure difference or the pressure after the filter...
A replacement element for FUTURA microfilters with 0.01 µm filtration. Replace it when the clogging indicator shows a large pressure difference or the pressure after the filter...
A replacement element for FUTURA microfilters with 0.01 µm filtration. Replace it when the clogging indicator shows a large pressure difference or the pressure after the filter...
A replacement element for FUTURA microfilters with 0.01 µm filtration. Replace it when the clogging indicator shows a large pressure difference or the pressure after the filter...
A replacement element for FUTURA microfilters with 0.01 µm filtration. Replace it when the clogging indicator shows a large pressure difference or the pressure after the filter...
A replacement element for FUTURA pre-filters with 0.3 µm filtration. Replace it when the clogging indicator shows a large pressure difference or the pressure after the filter...
A replacement element for FUTURA pre-filters with 0.3 µm filtration. Replace it when the clogging indicator shows a large pressure difference or the pressure after the filter...
A replacement bowl for FUTURA filters, filter regulators and units. Replace it when it is damaged or leaking. A damaged bowl may not safely withstand the pressure.
Pressure regulator FUTURA R38-1F, size 1: G 3/8" thread, setting range 0.1–1 bar, flow 2,500 l/min, inlet pressure up to 16 bar, 50 mm pressure gauge included, for ATEX...
A replacement plastic bowl for a size 1 COMBIBLOC unit with a built-in float drain that releases the condensate by itself as soon as it rises. It suits continuous operation,...
A replacement bowl for FUTURA filters, filter regulators and units. Replace it when it is damaged or leaking. A damaged bowl may not safely withstand the pressure.