Compressed air treatment units, Page 3
-
P2 treatment units; miniature version up to 12 bar
-
Treatment units A2; basic design up to 10 bar
-
B2 treatment units; metallic design up to 18 bar
-
I3 treatment units; compact design up to 13 bar
-
I8 treatment units; robust design up to 18 bar
-
Futura treatment units; ATEX up to 16 bar
-
Combibloc treatment units; compact up to 16 bar
-
Standard treatment units; high flow design
-
Treatment units A1X; stainless steel AISI316
Product sorting
List of products
Size 2 mounting nut for FUTURA air treatment units such as pressure regulator or pressure regulator with filter. For mounting the angle for fixing the unit.
Accessories and spare parts for METAL WORK air treatment units. Replacement container for METAL WORK lubricators size 3/8"-1/2".
Absorption filter with 0.005 um activated carbon, 3/8" connection, for compressed air and neutral gases with a flow rate of 700 l/min. Design according to ATEX II 2G2D. Maximum...
Absorption filter with 0.005 um activated carbon, 1/4" connection, for compressed air and neutral gases with a flow rate of 700 l/min. Design according to ATEX II 2G2D. Maximum...
Air pre-filter 0,3 um with 1/4" connection for compressed air and for neutral gases with a flow rate of 500 l/min. Design according to ATEX II 2G2D. Maximum inlet pressure 1,5 -...
Metal grease nipples up to 18 bar with a flow rate of 16,000 l/min in size 3 with 1" thread for effective oil mist doses for lubricating pneumatic tools or drives on production...
Complete unit in metal design up to 18 bar. Regulation, filtration, lubrication of compressed air with a flow rate of 4,600 l/min in size 3 with 1" thread. Regulation range 0 -...
Basic 5 um air filter with 1/2" connection for compressed air and neutral gases with a flow rate of 3,500 l/min. Design according to ATEX II 2G2D. Maximum inlet pressure 1,5 -...
Accessories and spare parts for METAL WORK air treatment units. Mounting angle for mounting units in sizes 3/8"-1/2".
Compressed air microfilter 0,01 um with 3/4" connection for compressed air and for neutral gases with flow rate 1 400 l/min. Design according to ATEX II 2G2D. Maximum inlet...
0.01 um compressed air microfilter with 1/2" connection for compressed air and neutral gases with a flow rate of 450 l/min. Design according to ATEX II 2G2D. Maximum inlet...
Accessories and spare parts for METAL WORK air treatment units. Replacement container for METAL WORK filters in 1/4" size.
Accessories and spare parts for METAL WORK air treatment units. Replacement container for METAL WORK lubricators size 3/4"-1"
Connection set of FUTURA air handling units with wall bracket size 2. The kit can be used to connect any 2 modules of a given size together without the need for screws and other...
Compressed air treatment units in metal design up to 18 bar. Lubricating grease gun in 3/4" size with a flow rate of up to 16,000 l/min for compressed air lubrication of e.g....
The air handling unit size 1 air handling unit - B2 allows air sampling with certain parameters inside the modular series. Tapping outlet via 4 x 1/8" thread. Mthe possibility...
Compact unit for compressed air treatment up to 13 bar. Compressed air regulation from 0 to 8 bar with a maximum flow rate of 260 l/min. Connection internal thread 1/8"....
Compressed air treatment unit in metal design up to 18 bar. 3/8" grease gun with a flow rate of up to 4,100 l/min for compressed air lubrication of e.g. pneumatic tools....
Metal filter for filtration of compressed air from a compressor at 20 um to 18 bar with a maximum flow rate of 9,100 l/min. Connection 3/4" pipe thread. Possibility to change...
Replacement container for lubrication unit A2 - A2NL-12. Simple container change with lock on the following units: A2L-12, A2U-12.
Replacement container for lubrication unit A2 - A2NL-38. Simple container change with lock on the following units: A2L-38, A2U-38.
Connection kit allowing the connection of two components from the B2 series of treatment units such as regulator, filter, lubricator of size 1.
Compact unit for compressed air treatment up to 13 bar. Compressed air regulation from 0 to 8 bar with a maximum flow rate of 300 l/min. Connection internal thread 1/4"....
Replacement container for FUTURA filters in size 1 with semi-automatic drainage - (manual manual and automatic drainage based on the fullness of the container). Suitable only...
Pressure regulator with 5 um air filtration for compressed air with or without oil and for neutral gases up to 16 bar. Design according to ATEX II 2G2D. The adjusting pin can be...
Compact regulator with 20 um filtration for compressed air treatment up to 13 bar. Compressed air control from 0 to 8 bar with a maximum flow rate of 600 l/min. Connection...
Air pressure regulator in metal design up to 18 bar. Compressed air regulator with a flow rate of 2,600 l/min in size 2 thread 3/8". Regulation range 0 - 12 bar. Application...
The filter cartridge with filtering capability is suitable for the exchange of A1 air treatment units. The 5 um - 1" version can filter 7,000 l/min of air compressed to a...
Pilot air pressure regulator in metal design up to 18 bar. Remote compressed air control with a flow rate of 4,500 l/min in size 2 1/2" thread. Regulation range 0 - 12 bar....
Compact regulator with 20 um filtration for compressed air treatment up to 13 bar. Compressed air control from 0 to 8 bar with a maximum flow rate of 600 l/min. Connection...
Metal filter up to 18 bar with 20 µm cartridge and flow rate of 11,000 l/min in size 3 with 1" thread. Application mainly in industry, laboratory, measuring and control technology.
Metal filter up to 18 bar with 20 µm cartridge and flow rate of 11,000 l/min in size 3 with 3/4" thread. Application mainly in industry, laboratory, measuring and control...
Accessories and spare parts for METAL WORK air treatment units. Replacement filter insert 20 um for filter size 1/4" as replacement insert for FDM and FWA air filters.
Accessories and spare parts for METAL WORK air treatment units. Replacement filter insert 5 um for filter size 1/4" as replacement insert for FDM and FWA air filters.
Metal filter up to 18 bar with 20 µm cartridge for a flow rate of 4 300 l/min in size 2 with 1/2" thread. Application mainly in industry, laboratory, measuring and control...
Metal filter up to 18 bar with 20 µm cartridge for a flow rate of 4 300 l/min in size 2 with 3/8" thread. Application mainly in industry, laboratory, measuring and control...
Replacement container for lubrication unit A2 - A2NL-14. Simple container change with lock on the following units: A2L-14, A2U-14.
Accessories and spare parts for METAL WORK air treatment units. Replacement filter insert 20 um for filter size 3/4"-1" as replacement insert for FDM and FWA air filters.
Accessories and spare parts for METAL WORK air treatment units. Replacement container for METAL WORK filters size 3/8"-1/2".
Accessories and spare parts for METAL WORK air treatment units. Mounting angle for mounting 1/4" size units.