ATMOS SEC 220 Screw Compressor - 22kW input 22 kW, output 3.8 m³/min, 8 bar, without tank, LOGIK 26-S, 7-year warranty
Code: SEC220Product detailed description

ATMOS SEC 220 Screw Compressor - 22kW
ATMOS SEC 220 is a 22 kW low-speed industrial compressor with an ATMOS AB 240 screw block. Motor 2969 rpm, efficiency 92.7% (IE3). Delivery 3.8 m³/min at 8 bar (10 bar → 3.1 m³/min). For multi-shift industrial operation.
The low-speed design means less wear and longer service life for both the block and the bearings. The combination of the large AB 240 block and low speeds provides a higher power reserve with lower thermal load. Dimensions 1120×870×1350 mm, weight 540 kg.
SEC 220 Configuration
Specifically, this variant consists of:

✓ Screw compressor
Atmos AB 240 screw block — rich power reserve.

— Inverter
Fixed-speed mode (direct drive)

— External air receiver
Connection to an existing pressure network (air receiver 270/500/900 l separate)

— External dryer
Condensing dryer as an external unit (optional)
Main features
ATMOS Screw Block
Large block with ample power reserve, in-house production in Chrast, 3D dimension control.
IE3 motor (high efficiency)
IE3 class motor with higher efficiency than standard IE2 — lower operating costs.
Bodywork 72 dB(A)
Soundproof steel housing, oversized cooler at the top.
LOGIK 26-S control
Microprocessor control, ATMOS Care monitoring, RS-485 (Modbus).
22 kW · 3.8 m³/min
Operating pressure 8/10 bar (optional during production). Rated voltage 400 V / 50 Hz.
7-year UNLIMITED warranty
Unique in the Czech Republic — regardless of operating hours. Czech product ATMOS Chrast since 1899.
SEC 220 Design and Features
The ATMOS AB 240 screw block is oversized for 22 kW operation — it has a reserve and does not run at maximum. 22 kW motor with 92.7% efficiency (IE3 class). The low-speed mode of 2969 rpm reduces vibrations, acoustic load, and wear. Oil fill 30 l (compared to 11 l in high-speed blocks) — longer replacement interval.

Design and Noise Level — 72 dB(A)
Comfort version — soundproof steel housing, noise level 72 dB(A). Motor protection class IP 23. Oversized cooler in the upper part of the body for reliable operation even in warm halls.
SEC 220 Technical Data
BASIC DATA — SEC 220 | |
|---|---|
| Nominal motor power | 22 kW (IE3 efficiency) |
| Operating pressure (variants) | 8 / 10 bar |
| Nominal air delivery | 3.8 / 3.1 m³/min |
| Rated voltage | 400 V / 50 Hz |
| Motor speed | 2969 min⁻¹ |
| Engine efficiency | 92.7% (IE3) |
| Motor protection class | IP 23 |
| Noise level (ISO 2151) | 72 dB(A) |
| Oil fill volume | 30 l |
| Compressed air outlet | G 1" |
| Hedging | 50 A |
| The temperature of the working environment | +5 ÷ +40 °C |
| Weight | 540 kg |
| Dimensions (L × W × H) | 1120×870×1350 mm |
SEC 220 DESIGN | |
| Housing | Noise-reducing steel (Comfort) |
| Screw block | Atmos AB 240 (ATMOS in-house production, 3D measurement) |
| Inverter | None (fixed-speed mode) |
| Control unit | LOGIK 26-S (microprocessor) + RS-485 |
| ATMOS Care | Integrated service interval monitoring |
| Guarantee | 7 years UNLIMITED — regardless of operating hours |
| Manufacturer | ATMOS Chrást, CZ (since 1899) |

Who is SEC 220 for
SEC 220 is purchased by medium-sized industrial operations with continuous (multi-shift) operation and a requirement for long machine service life. Typical customer: engineering plants of 25–40 people with continuous operation, automotive suppliers, woodworking plants with CNC lines.

Typical applications
- Engineering plants of 25–40 people with multi-shift operation
- Automotive suppliers (assembly operations with pneumatics)
- Woodworking plants with 5 or more CNC lines
- Plastic injection moulding machines with pneumatic logic
- Printing houses with sheet-fed machines and pneumatic separators
- Processing plants with a constant consumption level (≥ 80%)

7-year UNLIMITED warranty — unique in the Czech Republic
"We simply trust our machines! The best way to express confidence in the quality of our machines is to provide a SEVEN-YEAR UNLIMITED WARRANTY."
- No flat-rate payments
- No service contracts
- 7 years worry-free
- 7 years of operational certainty
- Online management via the ATMOS Plus app
Machine control — LOGIK 26-S

LOGIK 26-S controls operation. Large oil volume (30 l) → replacement interval every 6000 operating hours (compared to 4000 h for smaller blocks). ATMOS Care alerts for oil filter, air filter, and oil separator replacement.
- Monitoring operating hours
- Master/Slave mode for 2 compressors as 1 source
- Activity and fault logs (50 days history)
- Data transmission via RS-485 bus (Modbus)
- ATMOS Care — automatic reporting of service intervals
Accessories — option: Supervisory control system ARCHON

For compressor stations with 3, 5, or 9 compressors, the supervisory control system ARCHON is available. The overall efficiency of a multi-compressor station is fundamentally influenced by the way they are controlled.
- Up to 10 daily programs — various operating modes for weekdays / weekends / holidays
- 3 control methods: by operating hours (even wear), by fixed priorities (backup units), for maximum efficiency (energy saving)
- Touch SIEMENS SIMATIC panel with clear display of all compressor statuses
- Communication with LOGIK 26-S via Ethernet / RS-485 for remote management
ARCHON is an optional accessory — for a non-binding calculation proposal for a compressor station, contact us.
Related models and alternatives
If SEC SEC220 does not exactly match your operation, please look at the following alternatives:
SEC 220 (22 kW)
Smaller machine for a smaller workshop
SEC 221 Vario
Vario control — 20–30 % energy saving
SEC 300 (22 kW)
Higher performance for larger operations
Frequently asked questions
- What is the difference between SEC 300 and SEC 302?
- SEC 302 has a higher output (5.2 vs 4.5 m³/min at 8 bar) for the same 30 kW motor thanks to the new Atmos A 150 screw block (vs B 100 in SEC 300). It also has significantly lower noise levels — 65 dB(A) vs 75 dB(A). SEC 302 is the premium 30 kW version.
- What does Vario mean in the model name?
- Vario indicates a compressor with a Danfoss VLT inverter, which continuously regulates the speed of the screw unit according to current consumption. It eliminates idling and saves 20–30% of electrical energy compared to a fixed-speed machine. Vario versions are ideal for operations with intermittent or variable consumption.
- Can I choose a different working pressure than the standard 8 bar?
- Yes.
- SEC 220 is available in 8 or 10 bar versions. SEC 221 and all larger models (SEC 300+, SEC 302+, SEC 372+) are available in 8 / 10 / 13 bar variants. At higher pressure, the output in m³/min decreases — see the technical parameters table.
- Do SEC compressors have an integrated air receiver?
- No. All SEC models (150 to 372) are supplied as free-standing industrial machines. The pressure vessel (air receiver) is an external accessory — available in variants of 270 / 500 / 900 / 1000 l. We recommend sizing the receiver to 4–6× the nominal flow rate per minute to equalize pressure peaks.
- What screw block is in individual models?
- SEC 220 → Atmos AB 240 (slow-running). SEC 221 and 300 + Vario → Atmos B 100 (high-speed, 4–6 thousand rpm via belt). SEC 302 and 372 + Vario → Atmos A 150 (new premium block with higher performance and lower noise level).
- What is ARCHON?
- ARCHON is an ATMOS master control system for coordinating 3, 5, or 9 compressors as a single compressed air source. It offers 10 daily programs + 3 control methods (operating hours / fixed priorities / highest efficiency).
- Including Ethernet for remote management.
- What does heat recovery enable?
- The compressor generates compression heat, which normally dissipates into the surroundings through cooling. The ATMOS heat recovery exchanger captures this heat and transfers it to the water circuit (heating, domestic hot water heating). Up to 72% of input electrical energy can be recovered — payback period typically 1 year.
Additional parameters
| Category: | SEC |
|---|---|
| Warranty: | 7 let |
| Compressor type: | Screw compressor |
| Version: | Screw compressor |
| Pressure: | 10 bars |
| Air delivery: | 3 800 l/min |
| Pressure vessel volume: | It isn't |
| Connecting: | 1" |
| Motor power: | 22 kW |
| Mains voltage: | 400/50 V/Hz |
| Lubrication: | Oleic |
| Noise: | 72 dB(A) |
| Engine: | Electric |
| Soundproofed: | Yes |
| Drive: | Direct |
| Air dryer: | No |
| Retrieved from: | Professional |
| Development: | Stationary |
| Inverter: | No |
Product rating
Be the first who will post an article to this item!
ATMOS is a Czech family-owned compressor manufacturer, the company ATMOS Chrást s.r.o. from Chrást near Pilsen. It makes screw and piston compressors, its own screw blocks and generator sets, and besides stationary machines also mobile and locomotive compressors. It makes the blocks and air receivers itself, assembles and tests the machines in Chrást and exports them to more than 100 countries.
Engineering production in Chrást began in 1899, compressors have been made here for more than 70 years, and in 2024 the company celebrated its 125th anniversary. In the socialist era the works belonged to the state enterprise Škoda Plzeň; screw compressors arrived in the 1980s, at first under licence, and more than 25 new types have been added since. With us you will find the Perfect piston series for the workshop and the Albert, SEC and SmartTronic screw series for continuous operation.
Made in the Czech RepublicATMOS compressor series
Perfect — piston compressors
Cast-iron pump unit for the workshop. The cast-iron pump unit runs at low speed and copes with daily use. Since 2004 it has been working in tens of thousands of installations in the Czech Republic and abroad.
- 2.2 to 7.5 kW, 310 to 1,170 l/min
- horizontal or vertical receiver, 90 to 500 l
- two-stage machines for 12.5 and 14 bar
Albert — screw, 4 to 22 kW
From a small workshop to light production. The slow-running B100 or B150 screw block is coupled directly to the motor, with no belt.
- Komfort in a soundproof steel enclosure
- air receiver and dryer on the machine
- Vario with a frequency inverter
SEC — industrial, 22 to 37 kW
For continuous operation in production. A free-standing machine in a soundproofed steel enclosure, the air receiver is chosen separately.
- pressure 8, 10 or 13 bar
- IE3 motors and ATMOS screw blocks
- Vario with a frequency inverter
SmartTronic — 30 to 110 kW
A compressor station in one cabinet. The ATMOS flagship series for large industrial plants.
- free air delivery up to 19.1 m³/min
- pressure 7.5 to 13 bar
- FD version with a built-in fusion dryer
Service kits and oil
Everything for one service. Original kits for Perfect compressors for the 1st to 4th year, chosen by the machine’s pump unit.
- oil with extractor, filter elements, check valve parts
- for the 2nd and 4th year also valve plates and belt
- ATMOS VDL 100 oil for piston machines
Not sure whether you need a piston or a screw compressor? The selection calculator in the Compressors category will help you find the right output.
Choose a compressorATMOS series side by side
| Design, motor, pressure and equipment | ||||
|---|---|---|---|---|
| Series | Design | Motor | Pressure | Equipment |
| Perfect | piston, cast-iron pump unit | 2.2–7.5 kW | 10 · 12.5 · 14 bar | 90–500 l receiver, PFT version without receiver |
| Albert | screw, block directly on the motor | 4–22 kW | up to 13 bar | Komfort enclosure, receiver, dryer, Vario inverter |
| SEC | screw, free-standing | 22–37 kW | 8 · 10 · 13 bar | soundproofed enclosure, Vario inverter |
| SmartTronic | screw compressor station | 30–110 kW | 7.5–13 bar | FD fusion dryer, Vario inverter |
A piston compressor needs breaks; the air receiver gives it time to cool down. A screw compressor can run continuously.
How to choose an ATMOS compressor
1. Add up consumption
Add up the air consumption of the tools that will run at the same time and allow a reserve of about 30 %. Work with the machine’s free air delivery, not its intake capacity.
2. Piston or screw
For intermittent use in a workshop or garage, a Perfect piston compressor is enough. Where the compressor runs for most of the shift, choose an Albert, SEC or SmartTronic screw compressor.
3. Pressure and receiver
Most tools need 10 bar; the two-stage Perfect machines deliver 12.5 and 14 bar. A large receiver pays off when tools draw air in bursts: the machine then switches on less often.
4. Dry air and maintenance
For dry, clean air add a dryer and filters; on screw machines the dryer can be built into the compressor. Service a Perfect piston compressor once a year with an original service kit.
Frequently asked questions
- Who makes ATMOS compressors?
- The Czech family-owned company ATMOS Chrást s.r.o. at its plant in Chrást near Pilsen, where engineering production has been running since 1899. In the socialist era the plant belonged to the state enterprise Škoda Plzeň; from that time comes, for example, the 1982 PKD12 piston compressor under the ŠKODA brand. ATMOS makes its own screw blocks and air receivers, and assembles and tests the machines in Chrást.
- What does Vario in the name mean?
- A Vario machine has a frequency inverter that smoothly adjusts the speed of the screw block to the current air demand. The compressor does not run idle and, with variable demand, saves 20 to 30 % of electricity.
- What do the letters in the Albert series mean?
- K = Komfort in a soundproof steel enclosure, V = air receiver, S = built-in refrigeration dryer. For example, the E.50 KVS is an E.50 in the enclosure, with a receiver and a dryer.
- Which Perfect can I plug into a 230 V socket?
- The Perfect 2,2/90 EX and the Perfect 2,2/150 EX. The other Perfect compressors need a three-phase 400 V socket.
- Which oil goes into a Perfect compressor?
- ATMOS VDL 100 mineral compressor oil. Depending on the machine, the fill is 1 to 2 litres, and the oil comes with an extractor in every service kit.
- What is the FD fusion dryer in the SmartTronic series?
- A dryer built directly into the compressor that uses the machine’s waste heat for regeneration. You set the pressure dew point on the controller between +5 and −20 °C. The five largest models have no FD version.
The operating manual for Perfect compressors can be downloaded from the machine’s product page. ATMOS is a brand of ATMOS Chrást s.r.o.
| Manufacturing company : | ATMOS Chrást s.r.o. |
|---|---|
| Address : | Plzeňská 149, 330 03 Chrást, Czech Republic |
| E-mail : | info@atmos-chrast.cz |