ATMOS SEC 300 Screw Compressor power input 30 kW, capacity 4.5 m³/min, 8 bar, without tank, LOGIK 26-S, 7-year warranty

Code: SEC300
Not rated Rating details
FREEFREE
atmos sec 300
€11 559,10 / pcs €9 552,98 excl. VAT Measure price:
up to 20 days
Delivery to:
21.12.2026
Delivery options

SEC 300 · 30 kW · delivery 4.5 / 4 / 3.3 m³/min · pressure 8 / 10 / 13 bar.

30 kW industrial compressor for large-scale operations.

  • ATMOS screw block with generous power reserve
  • IE3 motor — high efficiency (lower operating costs)
  • Microprocessor control LOGIK 26-S + ATMOS Care monitoring
  • Noise-reducing steel body — noise level 75 dB(A)
  • RS-485 (Modbus) + Master/Slave mode for 2 compressors
  • 7-year UNLIMITED warranty — unique in the Czech Republic

Detailed information

Free shipping
Free shipping
For purchases over 5,000 CZK excl. VAT
We guarantee
We guarantee
Extended warranty and service
Discount voucher
Discount voucher
For every purchase
Return of goods within 14 days
Return of goods within 14 days
Completely at our expense

Product detailed description

ATMOS SEC 300 Screw Compressor

ATMOS SEC 300 Screw Compressor

ATMOS SEC 300 is a 30 kW industrial compressor with an ATMOS B 100 screw block. Delivery flow rate 4,5 m³/min at 8 bar (10 bar → 4,0 / 13 bar → 3,3 m³/min). For large industrial operations with higher constant consumption.

30 kW IE3 motor (efficiency 91,6 %). High-speed B 100 block via Multi-V belt. Motor protection class IP 55. Dimensions 1300×920×1270 mm, weight 620 kg. Noise level 75 dB(A).

SEC 300 Configuration

Specifically, this variant consists of:

Screw compressor

✓ Screw compressor

Atmos B 100 screw block — generous power reserve.

Inverter

— Inverter

Fixed-speed mode (direct drive)

External air tank

— External air receiver

Connection to an existing pressure network (air receiver 270/500/900 l separate)

External dryer

— External dryer

Condensing dryer as an external unit (optional)

Main features

ATMOS Screw Block

Large block with ample power reserve, in-house production in Chrast, 3D dimension control.

IE3 motor (high efficiency)

IE3 class motor with higher efficiency than standard IE2 — lower operating costs.

75 dB(A) housing

Soundproof steel housing, oversized cooler at the top.

LOGIK 26-S control

Microprocessor control, ATMOS Care monitoring, RS-485 (Modbus).

30 kW · 4.5 m³/min

Operating pressure 8/10/13 bar (optional at production). Rated voltage 400 V / 50 Hz.

7-year UNLIMITED warranty

Unique in the Czech Republic — regardless of operating hours. Czech product ATMOS Chrast since 1899.

SEC 300 Construction and Features

Same B 100 block as in SEC 221 — but with a 30 kW motor. Higher performance in compact dimensions (1300×920×1270 mm). Multi-V belt drive. Robust single-motor design — less service complexity than dual-motor machines of the same power class.

Design and Noise Level — 75 dB(A)

Comfort version — soundproof steel housing, noise level 75 dB(A). Motor protection class IP 55. Oversized cooler for continuous operation in warm halls.

SEC 300 Technical Data

BASIC DATA — SEC 300

Nominal motor power30 kW (IE3 efficiency)
Operating pressure (variants)8 / 10 / 13 bar
Nominal air delivery4.5 / 4 / 3.3 m³/min
Rated voltage400 V / 50 Hz
Motor speed2940 min⁻¹
Engine efficiency91.6 % (IE3)
Motor protection classIP55
Noise level (ISO 2151)75 dB(A)
Oil fill volume11 l
Compressed air outletG 1"
Hedging80 A
The temperature of the working environment+5 ÷ +40 °C
Weight620 kg
Dimensions (L × W × H)1300×920×1270 mm

SEC 300 DESIGN

HousingNoise-reducing steel (Comfort)
Screw blockAtmos B 100 (ATMOS in-house production, 3D measurement)
InverterNone (fixed-speed mode)
Control unitLOGIK 26-S (microprocessor) + RS-485
ATMOS CareIntegrated service interval monitoring
Guarantee7 years UNLIMITED — regardless of operating hours
ManufacturerATMOS Chrást, CZ (since 1899)
SEC 300 — technical design
Illustrative photo SEC 300

Who is SEC 300 suitable for

SEC 300 are purchased by large industrial operations with high constant compressed air consumption. Typical customer: production halls for 40–80 people with pneumatic logic, paint shops with several booths, plastics plants with multiple injection moulding machines.

Typical applications

  • Production halls for 40–80 people with continuous pneumatic operation
  • Paint shops with several spray booths
  • Plastics plants with 5+ injection moulding machines
  • Large automotive lines (assembly, finishing)
  • Central pressure stations for industrial parks
  • Printers with sheet-fed machines and helio-gravure
7-year UNLIMITED warranty

7-year UNLIMITED warranty — unique in the Czech Republic

"We simply trust our machines! The best way to express confidence in the quality of our machines is to provide a SEVEN-YEAR UNLIMITED WARRANTY."

  • No flat-rate payments
  • No service contracts
  • 7 years worry-free
  • 7 years of operational certainty
  • Online management via the ATMOS Plus app

Optional equipment — built-in heat recovery

ATMOS heat recovery

Built-in heat recovery is available as an optional accessory for the SEC 300. The recovery heat exchanger captures the heat produced by the compressor during air compression and transfers it to a water circuit (heating, DHW heating).

  • Recovers up to 72% of the input electrical energy
  • Built-in solution — integrated directly into the body
  • Investment return typically within 1 year of operation
  • Surcharge CZK 57,375 excl. VAT (CZK 69,424 incl. VAT)

Price according to the current ATMOS price list valid from 1. 12. 2025. For a non-binding calculation proposal, contact us.

Machine control — LOGIK 26-S

LOGIK 26-S

LOGIK 26-S controls operation. RS-485 (Modbus) for remote management. Master/Slave mode for coordination with another compressor (e.g. SEC 220 as backup). ATMOS Care monitoring of service intervals.

  • Monitoring operating hours
  • Master/Slave mode for 2 compressors as 1 source
  • Activity and fault logs (50 days history)
  • Data transmission via RS-485 bus (Modbus)
  • ATMOS Care — automatic reporting of service intervals

Accessories — option: Supervisory control system ARCHON

ARCHON control panel

For compressor stations with 3, 5, or 9 compressors, the supervisory control system ARCHON is available. The overall efficiency of a multi-compressor station is fundamentally influenced by the way they are controlled.

  • Up to 10 daily programs — various operating modes for weekdays / weekends / holidays
  • 3 control methods: by operating hours (even wear), by fixed priorities (backup units), for maximum efficiency (energy saving)
  • Touch SIEMENS SIMATIC panel with clear display of all compressor statuses
  • Communication with LOGIK 26-S via Ethernet / RS-485 for remote management

ARCHON is an optional accessory — for a non-binding calculation proposal for a compressor station, contact us.

Related models and alternatives

If the SEC 300 does not exactly match your operation, check out the following alternatives:

Frequently asked questions

What is the difference between SEC 300 and SEC 302?
SEC 302 has a higher output (5.2 vs 4.5 m³/min at 8 bar) for the same 30 kW motor thanks to the new Atmos A 150 screw block (vs B 100 in SEC 300). It also has significantly lower noise levels — 65 dB(A) vs 75 dB(A). SEC 302 is the premium 30 kW version.
What does Vario mean in the model name?
Vario indicates a compressor with a Danfoss VLT inverter, which continuously regulates the speed of the screw unit according to current consumption. It eliminates idling and saves 20–30% of electrical energy compared to a fixed-speed machine. Vario versions are ideal for operations with intermittent or variable consumption.
Can I choose a different working pressure than the standard 8 bar?
Yes.
SEC 220 is available in 8 or 10 bar versions. SEC 221 and all larger models (SEC 300+, SEC 302+, SEC 372+) are available in 8 / 10 / 13 bar variants. At higher pressure, the output in m³/min decreases — see the technical parameters table.
Do SEC compressors have an integrated air receiver?
No. All SEC models (150 to 372) are supplied as free-standing industrial machines. The pressure vessel (air receiver) is an external accessory — available in variants of 270 / 500 / 900 / 1000 l. We recommend sizing the receiver to 4–6× the nominal flow rate per minute to equalize pressure peaks.
What screw block is in individual models?
SEC 220 → Atmos AB 240 (slow-speed).
SEC 221 and 300 + Vario → Atmos B 100 (high-speed, 4–6 thousand rpm via belt). SEC 302 and 372 + Vario → Atmos A 150 (new premium block with higher performance and lower noise level).
What is ARCHON?
ARCHON is an ATMOS master control system for coordinating 3, 5, or 9 compressors as a single compressed air source. It offers 10 daily programs + 3 control methods (operating hours / fixed priorities / highest efficiency).
Including Ethernet for remote management.
What does heat recovery enable?
The compressor generates compression heat, which normally dissipates into the surroundings through cooling. The ATMOS heat recovery exchanger captures this heat and transfers it to the water circuit (heating, domestic hot water heating). Up to 72% of input electrical energy can be recovered — payback period typically 1 year.

← View the full ATMOS SEC range

Additional parameters

Category: SEC
Warranty: 7 let
Compressor type: Screw compressor
Version: Screw compressor
Pressure: 13 bar
Air delivery: 4 500 l/min
Pressure vessel volume: It isn't
Connecting: 1"
Motor power: 30 kW
Mains voltage: 400/50 V/Hz
Lubrication: Oleic
Noise: 75 dB(A)
Engine: Electric
Soundproofed: Yes
Drive: Direct
Air dryer: No
Retrieved from: Professional
Development: Stationary
Inverter: No

Product rating

Be the first who will post an article to this item!

Do not fill out this field

How would you rate this product? Choose 1 to 5 stars, where 1 is the worst and 5 is the best rating.

Security check

By submitting your review you agree to the privacy policy

ATMOS is a Czech family-owned compressor manufacturer, the company ATMOS Chrást s.r.o. from Chrást near Pilsen. It makes screw and piston compressors, its own screw blocks and generator sets, and besides stationary machines also mobile and locomotive compressors. It makes the blocks and air receivers itself, assembles and tests the machines in Chrást and exports them to more than 100 countries.

Engineering production in Chrást began in 1899, compressors have been made here for more than 70 years, and in 2024 the company celebrated its 125th anniversary. In the socialist era the works belonged to the state enterprise Škoda Plzeň; screw compressors arrived in the 1980s, at first under licence, and more than 25 new types have been added since. With us you will find the Perfect piston series for the workshop and the Albert, SEC and SmartTronic screw series for continuous operation.

ATMOS Perfect piston compressor and ATMOS Albert and SmartTronic screw compressorsMade in the Czech Republic
1899start of engineering production in Chrást
over 70 yearsof compressor manufacturing
over 100 countriesthat ATMOS exports compressors to
2.2–110 kWfrom the Perfect piston to the SmartTronic screw

ATMOS compressor series

ATMOS Perfect 4/270 piston compressor on a horizontal air receiver

Perfect — piston compressors

Cast-iron pump unit for the workshop. The cast-iron pump unit runs at low speed and copes with daily use. Since 2004 it has been working in tens of thousands of installations in the Czech Republic and abroad.

  • 2.2 to 7.5 kW, 310 to 1,170 l/min
  • horizontal or vertical receiver, 90 to 500 l
  • two-stage machines for 12.5 and 14 bar
View the Perfect series
ATMOS Albert E.50 K screw compressor on an air receiver

Albert — screw, 4 to 22 kW

From a small workshop to light production. The slow-running B100 or B150 screw block is coupled directly to the motor, with no belt.

  • Komfort in a soundproof steel enclosure
  • air receiver and dryer on the machine
  • Vario with a frequency inverter
View the Albert series
ATMOS SEC 372 Vario screw compressor

SEC — industrial, 22 to 37 kW

For continuous operation in production. A free-standing machine in a soundproofed steel enclosure, the air receiver is chosen separately.

  • pressure 8, 10 or 13 bar
  • IE3 motors and ATMOS screw blocks
  • Vario with a frequency inverter
View the SEC series
ATMOS SmartTronic screw compressor

SmartTronic — 30 to 110 kW

A compressor station in one cabinet. The ATMOS flagship series for large industrial plants.

  • free air delivery up to 19.1 m³/min
  • pressure 7.5 to 13 bar
  • FD version with a built-in fusion dryer
View the SmartTronic series
ATMOS VDL 100 oil for piston compressors

Service kits and oil

Everything for one service. Original kits for Perfect compressors for the 1st to 4th year, chosen by the machine’s pump unit.

  • oil with extractor, filter elements, check valve parts
  • for the 2nd and 4th year also valve plates and belt
  • ATMOS VDL 100 oil for piston machines
View service kits

Not sure whether you need a piston or a screw compressor? The selection calculator in the Compressors category will help you find the right output.

Choose a compressor

ATMOS series side by side

Design, motor, pressure and equipment
SeriesDesignMotorPressureEquipment
Perfectpiston, cast-iron pump unit2.2–7.5 kW10 · 12.5 · 14 bar90–500 l receiver, PFT version without receiver
Albertscrew, block directly on the motor4–22 kWup to 13 barKomfort enclosure, receiver, dryer, Vario inverter
SECscrew, free-standing22–37 kW8 · 10 · 13 barsoundproofed enclosure, Vario inverter
SmartTronicscrew compressor station30–110 kW7.5–13 barFD fusion dryer, Vario inverter

A piston compressor needs breaks; the air receiver gives it time to cool down. A screw compressor can run continuously.

How to choose an ATMOS compressor

1. Add up consumption

Add up the air consumption of the tools that will run at the same time and allow a reserve of about 30 %. Work with the machine’s free air delivery, not its intake capacity.

2. Piston or screw

For intermittent use in a workshop or garage, a Perfect piston compressor is enough. Where the compressor runs for most of the shift, choose an Albert, SEC or SmartTronic screw compressor.

3. Pressure and receiver

Most tools need 10 bar; the two-stage Perfect machines deliver 12.5 and 14 bar. A large receiver pays off when tools draw air in bursts: the machine then switches on less often.

4. Dry air and maintenance

For dry, clean air add a dryer and filters; on screw machines the dryer can be built into the compressor. Service a Perfect piston compressor once a year with an original service kit.

Frequently asked questions

Who makes ATMOS compressors?
The Czech family-owned company ATMOS Chrást s.r.o. at its plant in Chrást near Pilsen, where engineering production has been running since 1899. In the socialist era the plant belonged to the state enterprise Škoda Plzeň; from that time comes, for example, the 1982 PKD12 piston compressor under the ŠKODA brand. ATMOS makes its own screw blocks and air receivers, and assembles and tests the machines in Chrást.
What does Vario in the name mean?
A Vario machine has a frequency inverter that smoothly adjusts the speed of the screw block to the current air demand. The compressor does not run idle and, with variable demand, saves 20 to 30 % of electricity.
What do the letters in the Albert series mean?
K = Komfort in a soundproof steel enclosure, V = air receiver, S = built-in refrigeration dryer. For example, the E.50 KVS is an E.50 in the enclosure, with a receiver and a dryer.
Which Perfect can I plug into a 230 V socket?
The Perfect 2,2/90 EX and the Perfect 2,2/150 EX. The other Perfect compressors need a three-phase 400 V socket.
Which oil goes into a Perfect compressor?
ATMOS VDL 100 mineral compressor oil. Depending on the machine, the fill is 1 to 2 litres, and the oil comes with an extractor in every service kit.
What is the FD fusion dryer in the SmartTronic series?
A dryer built directly into the compressor that uses the machine’s waste heat for regeneration. You set the pressure dew point on the controller between +5 and −20 °C. The five largest models have no FD version.

The operating manual for Perfect compressors can be downloaded from the machine’s product page. ATMOS is a brand of ATMOS Chrást s.r.o.

Manufacturing company : ATMOS Chrást s.r.o.
Address : Plzeňská 149, 330 03 Chrást, Czech Republic
E-mail : info@atmos-chrast.cz