Screw compressor SPL-22/10D-500 Power input 22 kW, discharge up to 3,090 l/min, pressure 10 bar, air receiver 500 l, voltage 400/50 V/Hz + air dryer
Code: SPL-22/10D-500
Related products
Product detailed description
The largest stationThe largest complete station we carry from ABAC. 3,090 litres per minute, a 500-litre receiver and a refrigerant dryer on one frame — a compressed-air station for a whole site in a single delivery.
For halls and production sites where compressed air is the backbone medium and demand runs all shift. One delivery instead of assembling three machines.
What sets the SPL-22/10D-500 apart
3,090 l/min and a 500 l receiver
The highest delivery in the range with a reserve of air for the peak. For a site that draws without a break.
Dry air for the whole hall
A refrigerant dryer at a +3 °C dew point. Pipework and air tools stay free of water.
Compact for its output
1,904 × 780 × 1,833 mm for twenty-two kilowatts including receiver and dryer. The width stays at 780 mm, as on the standalone machine.
Service intervals up to 8,000 h
The Infologic2 unit tracks the 2,000 – 4,000 – 8,000 running-hour steps and reports when service is due.
What is inside
The latest-generation S67 screw block, driven from the electric motor by V-belts. Air leaving the block passes through vertical three-stage oil separation — in the photograph that is the tall black vessel.
The Infologic2 controller with a monochrome display oversees operation and tracks the 2,000 – 4,000 – 8,000 running hours service intervals. Oil level is checked through a sight glass on the outside of the machine, with no panel to remove.
Machine details
SPL-22/10D-500 specifications
- Delivery 3,090 l/min (185.4 m³/h) at 10 bar, outlet G 1".
- Motor power 22 kW, supply 400/50 V/Hz, three-phase, noise 70 dB(A).
- A 500 l receiver and a refrigerant dryer with a +3 °C dew point, R410A refrigerant.
- Dimensions 1,904 × 780 × 1,833 mm, weight 619 kg.
- S67 block on V-belts, Infologic2 controller, service intervals 2,000 – 4,000 – 8,000 running hours.
- The basic warranty is two years. ABAC offers an extension to five years for a surcharge of 5 % of the machine price (code ABA-5R) — with us that surcharge comes as a gift with the product. The 500-litre pressure vessel carries ten years against corrosion.
Where the SPL-22/10D-500 sits in the range
| ABAC SPINN Large screw compressors (10 bar / 400 V) | ||||||
|---|---|---|---|---|---|---|
| Model | Free air delivery | Motor power | Receiver | Dryer | Noise | Weight |
| SPL-15/10 | 2,215 l/min | 15 kW | — | no | 67 dB(A) | 313 kg |
| SPL-18/10 | 2,590 l/min | 18.5 kW | — | no | 69 dB(A) | 328 kg |
| SPL-22/10 | 3,090 l/min | 22 kW | — | no | 70 dB(A) | 344 kg |
| SPL-15/10D-500 | 2,215 l/min | 15 kW | 500 l | yes | 67 dB(A) | 588 kg |
| SPL-18/10D-500 | 2,590 l/min | 18.5 kW | 500 l | yes | 69 dB(A) | 603 kg |
| SPL-22/10D-500 (this model) | 3,090 l/min | 22 kW | 500 l | yes | 70 dB(A) | 619 kg |
Every model: 10 bar, 400/50 V/Hz, three-phase, outlet G 1", S67 block on V-belts, service intervals 2,000 – 4,000 – 8,000 running hours. Standalone machines 1,130 × 780 × 1,250 mm, D-500 versions 1,904 × 780 × 1,833 mm. Delivery to ISO 1217 annex C, noise to ISO 2151:2004.
The machine on its own, without receiver or dryer, is SPL-22/10, 275 kg lighter. A station 500 l/min weaker and a decibel quieter is SPL-18/10D-500. We carry air receivers separately as well, and lower ratings are covered by the ABAC SPINN Maxi range.
Above twenty-two kilowatts the compressor room is designed to measure — ventilation, heat recovery, a second machine for backup. Get in touch and we will go through it with you.
Additional parameters
| Category: | Compressors for all applications - hobby and industrial |
|---|---|
| Warranty: | 5 years |
| Compressor type: | Screw compressor |
| Pressure: | 10 bars |
| Displacement: | 3,090 l/min |
| Pressure vessel volume: | 500 L |
| Connecting: | 1" |
| Motor power: | 22 kW |
| Mains voltage: | 400/50 V/Hz |
| Lubrication: | Oleic |
| Noise: | 70 dB - Lwp(4m) |
| Dimensions: | 1 904 × 780 × 1 833 mm |
| Weight: | 619 kg |
| Engine: | Electric |
| Soundproofed: | Yes |
| Drive: | V-belts |
| Air dryer: | Yes |
| Retrieved from: | Professional |
| Development: | Stationary |
| Frequency converter: | No |
Product rating
Be the first who will post an article to this item!
Discussion
Be the first who will post an article to this item!
The company ABAC has been one of the most important manufacturers of piston compressors on the world market since its establishment in 1980 . Currently, the brand ABAC is owned by ATLAS COPCO, the largest compressor manufacturer in the world and is part of the multinational group PAD (Professional Air Division). The goal of the ABAC brand is to become a world leader in the development, production and sale of piston compressors.
Production at company ABAC
ABAC compressors are manufactured in 5 production centers around the world, with an annual production of almost 2 million compressors. The brand's parent plant ABAC in Turin, Italy employs around 250 employees and is primarily focused on the design and production of professional V-belt compressors with a daily production capacity of over 600 machines. The ABAC plant also has extensive warehouse facilities with several thousand compressors available for immediate delivery.
Innovative concept
ABAC does not only mean compressor production. We are directly involved in the development of key innovations and advanced solutions and set trends in the compressor market. The efforts of our designers have resulted in, for example, an aerodynamic pulley housing for temperature reduction of up to 35°C, the revolutionary XPAND hose reel compressor or the PRO LINE ZERO oil-free compressors with V-belts. In the ABAC program you will always find the most modern and unique solution for compressed air production on the market.
A modern solution
We are a modern company that is aware of the current trends around us. We are bringing advanced technologies to the compressor industry, such as the use of QR codes and the AIR TUBE app to make it easier for the user of our compressor to access the information they need. We use social media, chat and multimedia instead of traditional marketing and documentation formats. With compressors ABAC you will always have convenient access to all the necessary information.
Compressor program
In the supplier program of the ABAC brand you will find 100%. The basic range includes 100% from small portable compressors for home applications to larger stationary compressors for permanent deployment.
