Screw compressor SPL-15/10 power consumption 18 kW, discharge up to 2,215 l/min, pressure 10 bar, without air receiver, voltage 400/50 V/Hz + air dryer
Code: SPL-15/10
Related products
Product detailed description
The most efficient of the threeThe entry point to the SPINN Large range. Fifteen kilowatts, 2,215 litres per minute and the best air-to-power ratio of the three — 148 litres per minute per kilowatt, against 140 for its larger siblings.
For sites where air flows practically all the time but demand stays under two thousand litres per minute. Fabrication shops, a smaller paint shop, a production line with several stations.
What sets the SPL-15/10 apart
2,215 l/min from 15 kW
The best ratio of the three. It uses roughly 5 % less electricity per cubic metre of air than either the 18.5 kW or the 22 kW.
67 dB(A)
The quietest machine in the range. Three decibels below the 22 kW, which is audible in an enclosed compressor room.
1,130 × 780 mm footprint
The canopy has the same dimensions as the larger models. If you later swap the machine for a stronger one, the space still fits.
313 kg
The lightest in the range. The 31 kg difference from the 22 kW matters neither for handling nor for the floor.
What is inside
The latest-generation S67 screw block, driven from the electric motor by V-belts. Air leaving the block passes through vertical three-stage oil separation — in the photograph that is the tall black vessel.
The Infologic2 controller with a monochrome display oversees operation and tracks the 2,000 – 4,000 – 8,000 running hours service intervals. Oil level is checked through a sight glass on the outside of the machine, with no panel to remove.
Machine details
SPL-15/10 specifications
- Delivery 2,215 l/min (132.9 m³/h) at 10 bar, outlet G 1".
- Motor power 15 kW, supply 400/50 V/Hz, three-phase, noise 67 dB(A).
- Standalone version without a receiver or dryer — for sites that already have both.
- Dimensions 1,130 × 780 × 1,250 mm, weight 313 kg.
- S67 block on V-belts, Infologic2 controller, service intervals 2,000 – 4,000 – 8,000 running hours.
- The basic warranty is two years. ABAC offers an extension to five years for a surcharge of 5 % of the machine price (code ABA-5R) — with us that surcharge comes as a gift with the product.
Where the SPL-15/10 sits in the range
| ABAC SPINN Large screw compressors (10 bar / 400 V) | ||||||
|---|---|---|---|---|---|---|
| Model | Free air delivery | Motor power | Receiver | Dryer | Noise | Weight |
| SPL-15/10 (this model) | 2,215 l/min | 15 kW | — | no | 67 dB(A) | 313 kg |
| SPL-18/10 | 2,590 l/min | 18.5 kW | — | no | 69 dB(A) | 328 kg |
| SPL-22/10 | 3,090 l/min | 22 kW | — | no | 70 dB(A) | 344 kg |
| SPL-15/10D-500 | 2,215 l/min | 15 kW | 500 l | yes | 67 dB(A) | 588 kg |
| SPL-18/10D-500 | 2,590 l/min | 18.5 kW | 500 l | yes | 69 dB(A) | 603 kg |
| SPL-22/10D-500 | 3,090 l/min | 22 kW | 500 l | yes | 70 dB(A) | 619 kg |
Every model: 10 bar, 400/50 V/Hz, three-phase, outlet G 1", S67 block on V-belts, service intervals 2,000 – 4,000 – 8,000 running hours. Standalone machines 1,130 × 780 × 1,250 mm, D-500 versions 1,904 × 780 × 1,833 mm. Delivery to ISO 1217 annex C, noise to ISO 2151:2004.
For 375 l/min more in the same canopy there is SPL-18/10. If you are sourcing a receiver and a dryer for it separately, it is simpler to take the ready-made station SPL-15/10D-500. Below fifteen kilowatts the offering continues with the ABAC SPINN Maxi range, and receivers on their own for this machine are among our air receivers.
It looks counter-intuitive, but the manufacturer’s figures are unambiguous: 148 litres per minute per kilowatt against 140 for both larger models. Buy the stronger machine because you need more air — not because it would be more efficient.
Additional parameters
| Category: | Compressors for all applications - hobby and industrial |
|---|---|
| Warranty: | 5 years |
| Compressor type: | Screw compressor |
| Pressure: | 10 bars |
| Displacement: | 2,215 l/min |
| Pressure vessel volume: | It isn't |
| Connecting: | 1" |
| Motor power: | 15 kW |
| Mains voltage: | 400/50 V/Hz |
| Noise: | 67 dB - Lwp(4m) |
| Dimensions: | 1 130 × 780 × 1 250 mm |
| Weight: | 313 kg |
| Engine: | Electric |
| Soundproofed: | Yes |
| Drive: | V-belts |
| Air dryer: | No |
| Retrieved from: | Professional |
| Development: | Stationary |
| Frequency converter: | No |
Product rating
Be the first who will post an article to this item!
Discussion
Be the first who will post an article to this item!
The company ABAC has been one of the most important manufacturers of piston compressors on the world market since its establishment in 1980 . Currently, the brand ABAC is owned by ATLAS COPCO, the largest compressor manufacturer in the world and is part of the multinational group PAD (Professional Air Division). The goal of the ABAC brand is to become a world leader in the development, production and sale of piston compressors.
Production at company ABAC
ABAC compressors are manufactured in 5 production centers around the world, with an annual production of almost 2 million compressors. The brand's parent plant ABAC in Turin, Italy employs around 250 employees and is primarily focused on the design and production of professional V-belt compressors with a daily production capacity of over 600 machines. The ABAC plant also has extensive warehouse facilities with several thousand compressors available for immediate delivery.
Innovative concept
ABAC does not only mean compressor production. We are directly involved in the development of key innovations and advanced solutions and set trends in the compressor market. The efforts of our designers have resulted in, for example, an aerodynamic pulley housing for temperature reduction of up to 35°C, the revolutionary XPAND hose reel compressor or the PRO LINE ZERO oil-free compressors with V-belts. In the ABAC program you will always find the most modern and unique solution for compressed air production on the market.
A modern solution
We are a modern company that is aware of the current trends around us. We are bringing advanced technologies to the compressor industry, such as the use of QR codes and the AIR TUBE app to make it easier for the user of our compressor to access the information they need. We use social media, chat and multimedia instead of traditional marketing and documentation formats. With compressors ABAC you will always have convenient access to all the necessary information.
Compressor program
In the supplier program of the ABAC brand you will find 100%. The basic range includes 100% from small portable compressors for home applications to larger stationary compressors for permanent deployment.
