Screw compressor SPL-18/10D-500 Power consumption 18 kW, discharge up to 2,590 l/min, pressure 10 bar, air receiver 500 l, voltage 400/50 V/Hz + air dryer
Code: SPL-18/10D-500
Related products
Product detailed description
18.5 kW stationMiddle complete station from the SPINN Large range. A compressor with 2,590 l/min sits on a five-hundred-litre air receiver together with a refrigerant dryer — a ready-made air station with no assembly required.
For sites drawing around two and a half thousand litres per minute that are building the compressor room in one go and want dry air from day one.
What sets the SPL-18/10D-500 apart
2,590 l/min and a 500 l receiver
The receiver covers peaks, so the compressor does not start on every short draw. That saves both electricity and the machine.
Ball valve for condensate
Drain the water from the receiver by turning the cock. No unscrewing, no tools.
Dryer with a dew-point indicator
The panel shows whether the dryer is actually drying. Dew point +3 °C, R410A refrigerant.
69 dB(A)
Two decibels louder than the fifteen-unit station, one decibel quieter than the twenty-two.
What's inside
The latest-generation S67 screw block, driven from the electric motor by V-belts. Air from the block passes through a vertical three-stage oil separation — in the photo, this is the tall black vessel.
The Infologic2 controller with a monochrome display oversees operation and tracks the 2,000 – 4,000 – 8,000 running hours service intervals. Oil level is checked through a sight glass on the outside of the machine, with no panel to remove.
Machine details
Parameters SPL-18/10D-500
- Delivery 2,590 l/min (155.4 m³/h) at 10 bar, outlet G 1".
- Motor power 18.5 kW, supply 400/50 V/Hz, three-phase, noise 69 dB(A).
- A 500 l receiver and a refrigerant dryer with a +3 °C dew point, R410A refrigerant.
- Dimensions 1,904 × 780 × 1,833 mm, weight 603 kg.
- S67 block on V-belts, Infologic2 controller, service intervals 2,000 – 4,000 – 8,000 running hours.
- The standard warranty is two years. ABAC offers an extension to five years for a surcharge of 5% of the machine price (code ABA-5R) — we give you this surcharge as a free gift with the product. The warranty against rust-through of the five-hundred-litre pressure vessel is ten years.
Where the SPL-18/10D-500 sits in the range
| ABAC SPINN Large screw compressors (10 bar / 400 V) | ||||||
|---|---|---|---|---|---|---|
| Model | Air delivery | Power input | Air tank | Dryer | Noise level | Weight |
| SPL-15/10 | 2,215 l/min | 15 kW | — | no | 67 dB(A) | 313 kg |
| SPL-18/10 | 2,590 l/min | 18.5 kW | — | no | 69 dB(A) | 328 kg |
| SPL-22/10 | 3,090 l/min | 22 kW | — | no | 70 dB(A) | 344 kg |
| SPL-15/10D-500 | 2,215 l/min | 15 kW | 500 l | yes | 67 dB(A) | 588 kg |
| SPL-18/10D-500 (this model) | 2,590 l/min | 18.5 kW | 500 l | yes | 69 dB(A) | 603 kg |
| SPL-22/10D-500 | 3,090 l/min | 22 kW | 500 l | yes | 70 dB(A) | 619 kg |
All models: 10 bar, 400/50 V/Hz, three-phase, outlet G 1", S67 block on V-belts, service intervals 2,000 – 4,000 – 8,000 motor hours. Standalone units 1,130 × 780 × 1,250 mm, D-500 version 1,904 × 780 × 1,833 mm. Output according to ISO 1217 Annex C, noise level according to ISO 2151:2004.
The strongest station in the range is SPL-22/10D-500. Without receiver or dryer the same machine is SPL-18/10. Our whole offering of screw compressors sits in one place, and standalone air dryers we carry separately too.
When the figure starts to climb, the dryer is falling behind — most often because the condenser is clogged. A glance at the display on the morning walk-round saves repairing pipework marked by water.
Additional parameters
| Category: | Air compressors |
|---|---|
| Warranty: | 5 years |
| Compressor type: | Screw compressor |
| Pressure: | 10 bars |
| Air delivery: | 2,590 l/min |
| Pressure vessel volume: | 500 L |
| Connecting: | 1" |
| Motor power: | 18,5 kW |
| Mains voltage: | 400/50 V/Hz |
| Lubrication: | Oleic |
| Noise: | 69 dB - Lwp(4m) |
| Dimensions: | 1 904 × 780 × 1 833 mm |
| Weight: | 603 kg |
| Engine: | Electric |
| Soundproofed: | Yes |
| Drive: | V-belts |
| Air dryer: | Yes |
| Retrieved from: | Professional |
| Development: | Stationary |
| Inverter: | No |
Product rating
Be the first who will post an article to this item!
The company ABAC has been one of the most important manufacturers of piston compressors on the world market since its establishment in 1980 . Currently, the brand ABAC is owned by ATLAS COPCO, the largest compressor manufacturer in the world and is part of the multinational group PAD (Professional Air Division). The goal of the ABAC brand is to become a world leader in the development, production and sale of piston compressors.
Production at company ABAC
ABAC compressors are manufactured in 5 production centers around the world, with an annual production of almost 2 million compressors. The brand's parent plant ABAC in Turin, Italy employs around 250 employees and is primarily focused on the design and production of professional V-belt compressors with a daily production capacity of over 600 machines. The ABAC plant also has extensive warehouse facilities with several thousand compressors available for immediate delivery.
Innovative concept
ABAC does not only mean compressor production. We are directly involved in the development of key innovations and advanced solutions and set trends in the compressor market. The efforts of our designers have resulted in, for example, an aerodynamic pulley housing for temperature reduction of up to 35°C, the revolutionary XPAND hose reel compressor or the PRO LINE ZERO oil-free compressors with V-belts. In the ABAC program you will always find the most modern and unique solution for compressed air production on the market.
A modern solution
We are a modern company that is aware of the current trends around us. We are bringing advanced technologies to the compressor industry, such as the use of QR codes and the AIR TUBE app to make it easier for the user of our compressor to access the information they need. We use social media, chat and multimedia instead of traditional marketing and documentation formats. With compressors ABAC you will always have convenient access to all the necessary information.
Compressor program
In the supplier program of the ABAC brand you will find 100%. The basic range includes 100% from small portable compressors for home applications to larger stationary compressors for permanent deployment.
