22 kW
Screw and piston compressors with a 22 kW input rating. Input power is a useful first filter but not the whole story — what decides the choice is the free air delivered in litres per minute at your working pressure and how long the machine runs without a break. Continuous demand calls for a screw compressor; intermittent work with idle time is fine on a piston machine. Allow for the receiver, for getting the warm air out of the compressor room, and for an adequately rated electrical supply.
-
Black Wind piston compressors
-
Atmos reciprocating compressors
-
Walter reciprocating compressors
-
Piston compressors ABAC
-
Piston compressors ABAC
-
Expert Zero compressors
-
ABAC reciprocating compressors
-
Quiet compressors Super Silent OS
-
INDUSTRIAL TECH compressors
-
CLR reciprocating compressors
-
Combustion compressors
-
Screw compressors
-
Pressure vessels
-
Compressor accessories
.png)
Product sorting
List of products
E.222 K in Komfort version (soundproof steel enclosure), without air receiver · 22 kW · pressure 13 bar · capacity 3.0 m³/min. Top of the Albert range — 22...
E.222KV-VARIO in Comfort version (soundproof steel housing), with 500 l air receiver (horizontal) · 22 kW · pressure 13 bar · capacity 0.9 – 3.0 m³/min. Top...
E.222KVS-VARIO in Comfort version (soundproof steel housing), with a 500 l air receiver and integrated dryer · 22 kW · pressure 13 bar · capacity 0.9 – 3.0...
E.222 KVS in Comfort version (noise-reducing steel housing), with 500 l air receiver and integrated dryer · 22 kW · pressure 13 bar · capacity 3.0 m³/min....
SEC 220 · 22 kW · delivery 3.8 / 3.1 m³/min · pressure 8 / 10 bar. 22 kW slow-speed machine (motor 2969 rpm) — for multi-shift industrial use. ATMOS...
Ten bar and 3,500 l/min, the last machine in the range with an R 1" outlet. Above it the pipework is sized for R 1½".
Highly economical screw compressor with variable speed control by inverter. The compressor is equipped with a direct 1:1 lossless drive and a highly efficient IE4 permanent...
The most powerful machine in the range’s small enclosure. 4,100 l/min at seven bar, 560 kg — 80 more than the 18.5 kW, but not a centimetre more.
Highly economical screw compressor with variable speed control by inverter. The compressor is equipped with a direct 1:1 lossless drive and a highly efficient IE4 permanent...
The 22 kW at eight bar gives 4,000 l/min. The usual choice where compressed air drives several machines at once.
Highly economical screw compressor with variable speed control by inverter. The compressor is equipped with a direct 1:1 lossless drive and a highly efficient IE4 permanent...
E.222K-VARIO in Comfort version (soundproof steel body), without air receiver · 22 kW · pressure 13 bar · capacity 0.9 – 3.0 m³/min. Top Vario variant — 22...
E.222 KV Komfort version (noise-reducing steel body), with 500 l air receiver (horizontal) · 22 kW · pressure 13 bar · capacity 3.0 m³/min. Top of the...
SEC 221 · 22 kW · displacement 3.9 / 3.2 / 2.4 m³/min · pressure 8 / 10 / 13 bar. 22 kW with pressure selection up to 13 bar — for high-pressure pneumatic...
SEC 221 Vario · 22 kW · delivery 3.9 / 3.2 / 2.4 m³/min · pressure 8 / 10 / 13 bar. 22 kW Vario with Danfoss VLT inverter — 20–30% energy savings. ATMOS...
A standalone 22 kW screw compressor delivering 3,090 l/min at 10 bar. The strongest machine in the range, on a 1,130 × 780 mm footprint — the same as the 15 kW.
The largest complete compressed-air station in the range: a 22 kW compressor delivering 3,090 l/min, a 500-litre receiver and a refrigerant dryer on one frame. The most powerful...
The smallest two-stage WALTER for operation that runs full shifts and doesn't want to waste electricity. The housing with a footprint of 1.5 × 1.04 m weighs 738 kg and the...
Single-stage machine with an inverter for operation that will not run full shifts. It is 320 kg lighter than the two-stage SF 22 DSP. The connection is G 1″, noise level 64 dB(A).
The heavier of the pair of machines in a shared cabinet of 1,300 × 880 mm, designed for operation with constant air consumption. It has a G 1″ connection and fixed speed, so it...
A standalone machine for laser cutting, which you can supplement with an air tank and air treatment as needed. It weighs 550 kg, the noise level is 64 dB(A), and the connection...
A standalone machine with the highest pressure in the range offering, designed for laser cutting. It weighs 550 kg, the noise level is 64 dB(A) and the connection is G 1″; add...