SCR-110/10EPM2 screw compressor Motor input power 110 kW, supplied pressure 10 bar, volumetric flow rate 1260 Nm3/h
Code: SCR-110/10EPM2
Related products
Product detailed description
The 110 kW at ten bar delivers 21,000 l/min. It is the most powerful machine in the range that still fits under a low ceiling — its enclosure is 1,690 mm tall, where the larger classes are 2,150 mm.
Why 10 bar
Ten bar means 21,000 l/min against 24,500 at seven, a drop of 14 %. That is the smallest pressure penalty in the range. Watch the floor, though: the machine only comes down to 6,300 l/min, or 30 % of output — the narrowest regulation range of all twenty-one.
| The same 110 kW machine at three pressure settings | |||
|---|---|---|---|
| Order code | Pressure | Free air delivery (l/min) | Loss against 7 bar |
| SCR-110/7EPM2 | 7 bar | 7,400 – 24,500 | 0 % |
| SCR-110/8EPM2 | 8 bar | 7,200 – 24,000 | 2 % |
| SCR-110/10EPM2 — this machine | 10 bar | 6,300 – 21,000 | 14 % |
The dimensions of 2,800 × 1,750 × 1,690 mm, weight of 2,900 kg, DN 80 outlet and noise level of 78 dB(A) are identical across all three settings — it is one and the same machine.
How it differs from its neighbours
The smaller SCR-90/10EPM2 gives 16,500 l/min but regulates down to 24 % of output, so it is more flexible where demand fluctuates. The larger SCR-132/10EPM2 adds 2,000 l/min but needs a taller compressor room.
What is inside
Permanent magnet motor
Oil cooling in a closed circuit, IP65 protection, a design with no bearings. On 110 kW a saving of 5–6 % against IE2 is a figure you can see in the budget.
Direct drive through a taper coupling
No belts and no gearbox. On 110 kW a slipping belt would mean a loss of output that nobody notices until the electricity bill arrives.
Frequency inverter
Instead of blowing off the excess it reduces speed: 6,300 to 21,000 l/min steplessly, a floor at 30 % of output, pressure still within ±0.1 bar.
New-generation airend
A reground rotor profile and optimised ports. On a machine giving 21,000 l/min, every percent of efficiency means a different sum than it would on a small compressor.
SCR9000 controller
A graphical schematic of the machine, a service schedule and remote monitoring over RS485. A cascade of sixteen machines with no separate control cabinet.
What the machine needs in the compressor room
Ten bar and 21,000 l/min gives 1,260 m³/h. The regulation floor of 6,300 l/min means the machine needs either steady demand or a substantial receiver — otherwise it will shut down and restart. Ventilation 20,000 m³/h.
| SCR-110/10EPM2 — figures for the compressor room design | |
|---|---|
| Free air delivery | 21,000 l/min · 1,260 m³/h |
| Regulation range | 6,300 – 21,000 l/min (down to 30 % of output) |
| Ventilation required | 20,000 m³/h |
| Dimensions L × W × H | 2,800 × 1,750 × 1,690 mm |
| Weight | 2,900 kg |
| Compressed air outlet | DN 80 |
| Noise level at 1 m | 78 dB(A) |
| Voltage | 400 V / 50 Hz |
Equipment
- permanent magnet motor above IE4 level, oil-cooled in a closed circuit, IP65 protection, no bearings
- direct drive through a taper coupling — no belts, gearbox or coupling
- vector-controlled frequency inverter, regulation across 25 to 100 % of speed
- the cooling fan is inverter-driven as well
- new screw airend with a rotor profile developed in Japan, service life over 100,000 hours
- SCR9000 controller with touchscreen, weekly schedule and cascade of up to 16 machines
- intake nanofilter with 99.9 % retention, 0.1 µm oil filter
- oversized separator holding residual oil below 3 ppm
- all-steel internal pipework instead of rubber hoses
- soft start — the current never exceeds the rated value
It is precisely that high floor which makes a pair of machines worth considering on the 110 kW at ten bar — one holding the base load, the other coming in at peak. The controller handles a cascade of up to sixteen units on its own, as the SCR-EPM2 range describes.
Down to only 30 % of output. If your plant goes quiet overnight, two smaller machines will run cheaper than one 110 kW.
Additional parameters
| Category: | Compressors for all applications - hobby and industrial |
|---|---|
| Warranty: | 5 years |
| Compressor type: | Screw compressor |
| Pressure: | 10 bars |
| Displacement: | 21,000 l/min |
| Pressure vessel volume: | It isn't |
| Connecting: | DN80 |
| Motor power: | 110 kW |
| Mains voltage: | 400/50 V/Hz |
| Lubrication: | Oleic |
| Noise: | 78 dB(A) |
| Dimensions: | 3 000 × 1 750 × 1 690 mm |
| Weight: | 2,900 kg |
| Engine: | Electric |
| Soundproofed: | Yes |
| Drive: | Direct |
| Air dryer: | No |
| Retrieved from: | Professional |
| Development: | Stationary |
| Frequency converter: | Yes |
-
Pronájem kompresorů SCR (572.3 kB)
-
Produktový list (4.6 MB)
-
Úspory energií (5.2 MB)
-
Přehled programu SCR (1.8 MB)
-
Plán údržby (170.7 kB)
Product rating
Be the first who will post an article to this item!
Discussion
Be the first who will post an article to this item!
Shanghai Screw Compressor Co., Ltd(SCR) is a manufacturing company founded in 2000, focusing on innovation, research, development, production, sales and service in the field of industrial compressors. The SCR production plant is a modern facility with more than 250 employees on an area of over 80,000m2. More than 10% of the staff is in the engineering division with a focus on research and development.
SCR's product portfolio consists of energy-efficient screw compressors, including oil-free and two-stage solutions. SCR manufactures in accordance with ISO 9001 standards, holds CE certification for the European market, UL for the US market, Class Zero certification for oil-free machines and the performance of all machines manufactured is audited by SGS.
After more than 20 years of development, SCR has entered into strategic collaborations with many partners and its products are exported to more than 80 countries worldwide.
In 2018, SCR entered into a strategic cooperation in the form of a joint venture with Japanese manufacturer Anest Iwata, which has implemented its quality and technology control system at SCR, helping to develop and bring new, energy-efficient solutions and even more reliable compressors to the market.
 |
 |
 |
 |
 |
| 83
countries with trade |
500
distributors |
50 000
users |
80 000
square meters |
140 000
pieces produced |
| 2000
Founding of SCR and start of screw compressor production |
2008
Start of production of oil-free SCR-G compressors |
2015
Screw compressors with PM motors are launched on the market |
2016
Production of the unique SCR-PM2 small compressors |
2018
Joint-venture with Japanese manufacturer ANEST-IWATA |
2020
Development of new 2-stage compressors and turbocompressors with magnetic levitation |
Strategic cooperation with ANEST IWATA
|
ANEST IWATA's market share in Japan
|
ANEST IWATA Corporation was founded in 1926 and has been in business for over 90 years. Its shares have been traded on the Tokyo Stock Exchange since 1973. The main activities include the production of industrial painting systems, air compressors and vacuum technology. The main production facilities are located in Akita and Fukushima prefectures and together cover over 50,000m2 production areas. In 2018, ANEST IWATA entered into a strategic joint venture with SCR to increase the global market share of both companies in the screw compressor segment and to significantly strengthen the development of energy-efficient compressors and introduce a strict Japanese quality management system into SCR's production plant. |
Global presenceSCR compressors are known worldwide through more than 80 dealerships. In Europe, the SCR brand is officially represented not only in the Czech and Slovak Republics, but also in Great Britain, Spain, Belgium, Finland, Poland, Hungary, Slovenia and Ukraine. |
 |
 |
Development and innovationSCR is dedicated to innovation in air compressor and screw block technology. Driven by our vision, we look to the future and want to extend our efforts into finding disruptive solutions in the development of new technologies that are addressed to meet the needs of our customers. |
 |
SCR brochure - program overviewSCR Compressors | Economical air production solutions Version CZ, PDF - 1,81 MB.
|
.jpg)