Industrial air filters quality class 2
Our industrial filtration programme comprises hundreds of different filters with which you can completely remove all mechanical contaminants and the other factors that degrade compressed air quality, such as condensate and oil vapour. Every industrial air filter on this page complies with ISO 8573 and falls into quality class 2 as far as mechanical contaminants are concerned. And if you are unsure how to choose, see our article: How and why to filter compressed air
.png)
Product sorting
List of products
With a G 3/8" thread and a flow of 1,000 l/min at 7 bar, the AAFM-60 fine pre-filter traps fine solid particles larger than 0.1 µm, water and oil; residual oil is below 0.1...
Spare element AAFM-35V for fine pre-filters AAFM-35 and AAFM-60. Recommended replacement every 12 months or 4,000 operating hours.
Spare element PF-03 with a white end cap for the Hankison F03-B-PF dust filter. Replacement: 6,000 h / 12 months.
Spare element PF-02 with a white end cap for the Hankison F02-B-PF dust filter. Replacement: 6,000 h / 12 months.
With a G 1/2" thread and a flow of 1,416 l/min, the Hankison NGF F04-B-PF dust filter traps solid particles larger than 1 µm with an efficiency of 99.999%, as well as large...
Spare element AAFM-120V for fine pre-filter AAFM-120. Recommended replacement every 12 months or 4,000 operating hours.
Spare element AAFM-335V for fine pre-filter AAFM-335. Recommended replacement every 12 months or 4,000 operating hours.
Spare element AAFM-78V for fine pre-filter AAFM-78. Recommended replacement every 12 months or 4,000 operating hours.
AFM filters are used to remove the largest mechanical impurities from compressed air up to 0.1 µm according to ISO 8573-1 class 2. Body with easily removable container and...
Spare element PF-04 with a white end cap for the Hankison F04-B-PF dust filter. Replacement: 6,000 h / 12 months.
With a G 1/4" thread and a flow of 417 l/min at 7 bar, the AAFM-25 fine pre-filter traps fine solid particles larger than 0.1 µm, water and oil; residual oil is below 0.1 mg/m³....
With a G 3/8" thread and a flow of 500 l/min at 7 bar, the AAFM-30 fine pre-filter traps fine solid particles larger than 0.1 µm, water and oil; residual oil is below 0.1 mg/m³....
With a G 3/8" thread and a flow of 983 l/min, the Hankison NGF F03-B-PF dust filter traps solid particles larger than 1 µm with an efficiency of 99.999%, as well as large...
Spare element AAFM-25V for fine pre-filters AAFM-25 and AAFM-30. Recommended replacement every 12 months or 4,000 operating hours.
Spare element PFM-010V for PF, HPF, WFIT and WFIF fine pre-filters of size 010 — borosilicate microfibres. Replace it at least once every 12 months.
Spare element PF-07 with a white end cap for the Hankison F07-B-PF dust filter. Replacement: 6,000 h / 12 months.
Spare element PF-08 with a white end cap for the Hankison F08-B-PF dust filter. Replacement: 6,000 h / 12 months.
Spare element PF-10 with a white end cap for the Hankison F10-B-PF dust filter. Replacement: 6,000 h / 12 months.
Spare element PF-11 with a white end cap for the Hankison F11-B-PF dust filter. Replacement: 6,000 h / 12 months.
Spare element PF-06 with a white end cap for the Hankison F06-B-PF dust filter. Replacement: 6,000 h / 12 months.
With a G 3/4" thread and a flow of 2,916 l/min, the Hankison NGF F07-B-PF dust filter traps solid particles larger than 1 µm with an efficiency of 99.999%, as well as large...
With a G 2 1/2" thread and a flow of 28,000 l/min at 7 bar, the AAFM-1680 fine pre-filter traps fine solid particles larger than 0.1 µm, water and oil; residual oil is below 0.1...
With a G 1" thread and a flow of 5,583 l/min at 7 bar, the AAFM-335 fine pre-filter traps fine solid particles larger than 0.1 µm, water and oil; residual oil is below 0.1...
With a G 1 1/2" thread and a flow of 8,500 l/min at 7 bar, the AAFM-510 fine pre-filter traps fine solid particles larger than 0.1 µm, water and oil; residual oil is below 0.1...
With a G 3/4" thread and a flow of 2,116 l/min, the Hankison NGF F06-B-PF dust filter traps solid particles larger than 1 µm with an efficiency of 99.999%, as well as large...
Spare element AAFM-510V for fine pre-filter AAFM-510. Recommended replacement every 12 months or 4,000 operating hours.
With a G 3" thread and a flow of 36,000 l/min at 7 bar, the AAFM-2160 fine pre-filter traps fine solid particles larger than 0.1 µm, water and oil; residual oil is below 0.1...
With a G 2" thread and a flow of 16,667 l/min at 7 bar, the AAFM-1000 fine pre-filter traps fine solid particles larger than 0.1 µm, water and oil; residual oil is below 0.1...
With a G 1 1/2" thread and a flow of 13,000 l/min at 7 bar, the AAFM-780 fine pre-filter traps fine solid particles larger than 0.1 µm, water and oil; residual oil is below 0.1...
With a G 2" thread and a flow of 25,000 l/min at 7 bar, the AAFM-1500 fine pre-filter traps fine solid particles larger than 0.1 µm, water and oil; residual oil is below 0.1...
Spare element AAFM-780V for fine pre-filter AAFM-780. Recommended replacement every 12 months or 4,000 operating hours.
Spare element AAFM-1000V for fine pre-filter AAFM-1000. Recommended replacement every 12 months or 4,000 operating hours.
With a G 1/2" thread and a flow of 1,183 l/min at 7 bar, the HFM-007 fine pre-filter traps fine solid particles larger than 0.1 µm, water and oil aerosol; residual oil is below...
Spare element AAFM-1500V for fine pre-filters AAFM-1500 and AAFM-1680. Recommended replacement every 12 months or 4,000 operating hours.
Spare element AAFM-2760V for fine pre-filter AAFM-2760. Recommended replacement every 12 months or 4,000 operating hours.
Spare element BFM-0240V for BFM fine pre-filters of all sizes, diameter 90 mm, height 760 mm. Recommended replacement at least once a year or at a pressure drop of 350 mbar.
With a G 3/4" thread and a flow of 2,000 l/min at 7 bar, the AAFM-120 fine pre-filter traps fine solid particles larger than 0.1 µm, water and oil; residual oil is below 0.1...
With a G 1" thread and a flow of 3,300 l/min at 7 bar, the AAFM-198 fine pre-filter traps fine solid particles larger than 0.1 µm, water and oil; residual oil is below 0.1...
AFM filters are used to remove the largest mechanical impurities from compressed air up to 0.1 µm according to ISO 8573-1 class 2. Body with easily removable container and...
With a G 1/4" thread and a flow of 583 l/min at 7 bar, the AAFM-35 fine pre-filter traps fine solid particles larger than 0.1 µm, water and oil; residual oil is below 0.1 mg/m³....