Industrial air filters ISO 8573 for 12 bar
Do you produce compressed air at a working pressure of 12 bar? We bring a wide spectrum of solutions for improving the air quality in your compressor system and protecting all its components – air tools, for example – from condensate, oil vapour and mechanical contaminants. Industrial air filters compliant with ISO 8573 from Omega Air, B-Air, NGF and Mark will capture every one of these enemies of compressed air quality.
And if you are unsure how to choose the right air filter, take a look at the article in our advice section: How to filter compressed air
.png)
Product sorting
List of products
Replacement filter cartridge PFI1 for a filter with filtration capability down to 1 µm and a working pressure of 12 bar. Working temperature up to 150°C. Made of stainless steel...
Replacement filter cartridge PFN5 for filter with filtration capacity up to 5 µm and working pressure 12 bar. Operating temperature up to 150°C. Made of stainless steel strainer.
Replacement PFA filter cartridge for filter with filtration capacity up to 0,1 µm and working pressure 16 bar. Operating temperature up to 150°C. Contains filtering activated...
Replacement PFA filter cartridge for filter with filtration capacity up to 0,1 µm and working pressure 16 bar. Operating temperature up to 150°C. Contains filtering activated...
Replacement filter cartridge PFI1 for a filter with filtration capability down to 1 µm and a working pressure of 12 bar. Working temperature up to 150°C. Made of stainless steel...
Replacement filter cartridge PFI20 for filter with filtration capacity up to 20 µm and working pressure 12 bar. Operating temperature up to 150°C.
Replacement filter cartridge PFI20 for filter with filtration capacity up to 20 µm and working pressure 12 bar. Operating temperature up to 150°C.
Replacement filter cartridge PFN25 for a filter with filtration efficiency up to 25 µm and working pressure of 12 bar. Operating temperature up to 150°C. Made of stainless steel...
Replacement filter cartridge PFN25 for a filter with filtration efficiency up to 25 µm and working pressure of 12 bar. Operating temperature up to 150°C. Made of stainless steel...
Replacement filter cartridge PFN5 for filter with filtration capacity up to 5 µm and working pressure 12 bar. Operating temperature up to 150°C. Made of stainless steel strainer.
Replacement filter element PFS with filtration capability down to 0.01 µm and working pressure of 12 bar. Working temperature up to 150°C. Made of borosilicate microfibers.
Mesh filter PFN25 with G3" connection thread designed for use in highly corrosive environments. Filtration capacity up to 25 µm. Maximum working pressure is 12 bar, maximum flow...
Strainer filter PFN25 with G3" connection thread designed for use in highly corrosive environments. Filtration capacity up to 25 µm. Maximum working pressure is 12 bar, maximum...
PFN5 strainer filter with G3" connection thread designed for use in highly corrosive environments. Filtration capability down to 5 µm. Maximum working pressure up to 12 bar,...
Microfilter PFM with G3" connection thread designed for use in highly corrosive environments. Filtration capacity down to 0.1 µm. Maximum working pressure is 12 bar, maximum...
PFM microfilter with G3" connection thread designed for use in highly corrosive environments. Filtration efficiency down to 0.1 µm. Maximum working pressure is 12 bar, maximum...
SPFM microfilter with G3" connection thread for high efficiency filtration of compressed air, process air and industrial gases. Filtration capacity up to 0.01 µm. Maximum...
PFI pre-filter with G3" connection thread, designed for use in highly corrosive environments. Filtration capability down to 1 µm. Maximum working pressure is 12 bar, maximum...
PFN5 strainer filter with G3" connection thread, designed for use in highly corrosive environments. Filtration capability down to 5 µm. Maximum working pressure up to 12 bar,...
PFS microfilter with G3" connection thread designed for use in highly corrosive environments. Filtration capacity down to 0.01 µm. Maximum working pressure is 12 bar, maximum...
PFS microfilter with G3" connection thread designed for use in highly corrosive environments. Filtration capability down to 0.01 µm. Maximum working pressure is 12 bar, maximum...
The SPFN25 pre-filter with G3" connection thread is designed for highly efficient filtration of compressed air, process air and industrial gases. Filtration capacity up to 25...
The SPFN25 pre-filter with G3" connection thread is designed for highly efficient filtration of compressed air, process air and industrial gases. Filtration capacity up to 25...
The SPFN5 pre-filter with G3" connection thread is designed for highly efficient filtration of compressed air, process air and industrial gases. Filtration capacity up to 5 µm....
The SPFN5 pre-filter with G3" connection thread is designed for highly efficient filtration of compressed air, process air and industrial gases. Filtration capacity up to 5 µm....
Pre-filter WFIFI1 with DN80 flange connection, designed for use in highly corrosive environments. Filtration capability up to 1 µm. Maximum working pressure up to 12 bar,...
Pre-filter WFIFI1 with DN80 flange connection designed for use in highly corrosive environments. Filtration capability up to 1 µm. Maximum working pressure up to 12 bar, maximum...
WFITN25 prefilter with DN80 flange connection designed for use in highly corrosive environments. Filtration capability up to 25 µm. Maximum working pressure up to 12 bar,...
Pre-filter WFITN25 with DN80 flange connection, designed for use in highly corrosive environments. Filtration capacity up to 25 µm. Maximum working pressure up to 12 bar,...
Pre-filter WFIFN5 with DN80 flange connection designed for use in highly corrosive environments. Filtration capability down to 5 µm. Maximum working pressure up to 12 bar,...
Pre-filter WFIFN5 with DN80 flange connection designed for use in highly corrosive environments. Filtration capability down to 5 µm. Maximum working pressure up to 12 bar,...
WFITN pre-filter with G3" connection thread, designed for use in highly corrosive environments. Filtration capacity up to 25 µm. Maximum working pressure up to 12 bar, maximum...
WFITN5 pre-filter with G3" connection thread, designed for use in highly corrosive environments. Filtration capability down to 5 µm. Maximum working pressure up to 12 bar,...
Pre-filter WFITN5 with G3" connection thread designed for use in highly corrosive environments. Filtration capacity up to 5 µm. Maximum working pressure up to 12 bar, maximum...
PFI pre-filter with G3" connection thread, designed for use in highly corrosive environments. Filtration capacity down to 1 µm. Maximum working pressure is 12 bar, maximum flow...
Welded prefilter PFW with G3" connection thread designed for use in highly corrosive environments. Filtration capability down to 1 µm. Maximum working pressure is 12 bar,...
Welded pre-filter PFW with G3" connection thread, designed for use in highly corrosive environments. Filtration capability down to 1 µm. Maximum working pressure is 12 bar,...
SPFM microfilter with G3" connection thread for high efficiency filtration of compressed air, process air and industrial gases. Filtration capacity up to 0.01 µm. Maximum...
SPFS sterile filter with G3" connection thread for highly efficient filtration of compressed air, process air and industrial gases. Filtration capacity less than 0.01 µm...
SPFS sterile filter with G3" connection thread for highly efficient filtration of compressed air, process air and industrial gases. Filtration capacity less than 0.01 µm...