WALTER SKTG 15/500 KSP COMBO Screw Compressor power input 15 kW, air delivery 2.25 m³/min at 8 bar, air tank 500 l, with dryer, direct drive, 7-year warranty
Code: SKTG-15/500-KSP-COMBO
Product detailed description
WALTER SKTG 15/500 KSP COMBO fixed-speed screw compressor with dryer
SKTG 15/500 KSP COMBO is the most powerful assembly in the SKTG KSP range: it adds a dryer with a +3 °C dew point and filters to the fixed-speed compressor with a 500 l air tank.
The assembly weighs 487 kg, 58 kg more than the version without the dryer, while the dimensions of 1,970 × 725 × 1,750 mm remain the same. At 8 bar it delivers 2.25 m³/min, at 13 bar 2 m³/min.
Configuration of this machine
- Direct drive 1:1 · large low-speed screw block · fixed speed
- Three pressures: 8, 10 and 13 bar
- Dryer and filters included in the assembly, dew point +3 °C
- Connection G ¾″, noise level 62 dB(A), service every 2,000 operating hours
- Power supply 400 V / 3 / 50 Hz, WALTER CONTROLLER control unit
Who it suits
For operations with higher but constant consumption of dry air that don't want to combine a dryer and filters separately. With a 15 kW input power, it is the assembly with the highest air delivery at all three pressures in the SKTG KSP range.
When to choose a different model
With inverter
For fluctuating consumption, the SFTG 15/500 KSP COMBO is intended, with the same input power, dryer and air tank, weighing 492 kg.
Without dryer
If you dry the air elsewhere, the SKTG 15/500 KSP, which is 58 kg lighter, is sufficient.
What the parameters imply — calculated values
The values are calculated from the air delivery at 8 and 13 bar and serve to compare models with each other, not as a guaranteed figure.
Frequently asked questions
- What air delivery does the machine provide at individual pressures?
- At fixed speed, the air delivery is a single value at each pressure: 2.25 m³/min at 8 bar, 2.15 m³/min at 10 bar and 2 m³/min at 13 bar.
- How is it maintained?
- Service is required every 2,000 engine hours. Maintenance is simplified by steel oil and air piping and easy access to the coolers.
The machine is covered by a 7-year warranty on the entire machine. Warranty conditions, maintenance, and a comparison of all 4 models can be found in the category WALTER SKTG KSP screw compressors: direct drive on the air receiver.
Ventilek advises
At 487 kg, this is the heaviest assembly in the SKTG KSP range, so it is advisable to check the floor and the method of transport into the machine room.
Additional parameters
| Category: | Air compressors |
|---|---|
| Warranty: | 7 let |
| Compressor type: | Screw compressor |
| Pressure: | 8 bar, 10 bars, 13 bar |
| Air delivery: | 2 250 l/min |
| Pressure vessel volume: | 500 L |
| Design of pressure vessel: | Lying down |
| Connecting: | 3/4" |
| Motor power: | 15 kW |
| Mains voltage: | 400/50 V/Hz |
| Lubrication: | Oleic |
| Noise: | 62 dB(A) |
| Dimensions: | 1 970 × 725 × 1 750 mm |
| Weight: | 487 kg |
| Warranty: | 7 years |
| Engine: | Electric |
| Soundproofed: | Yes |
| Drive: | Direct |
| Air dryer: | Yes |
| Retrieved from: | Professional |
| Development: | Stationary |
| Inverter: | No |
Product rating
Be the first who will post an article to this item!
Discussion
Be the first who will post an article to this item!
WALTER Kompressortechnik - Innovative Solutions for Compressors
- About the company WALTER: WALTER Kompressortechnik is a renowned manufacturer of air compressors and accessories, known for its quality, reliability and innovative technologies. The company focuses on providing highly efficient solutions for various industries.
- Product portfolio:
- Screw compressors: we offer a wide range of screw compressors that are designed for maximum energy efficiency and long life. Ideal for high demanding industrial applications.
- Reciprocating compressors: these compressors are robust and reliable, suitable for smaller applications and workshops where high flexibility and low running costs are required.
- Mobile compressors: lightweight and easily portable compressors that allow easy use in a variety of locations, ideal for construction and field work.
- Scroll and special compressors: provide quiet operation and are suitable for specific applications requiring minimal vibration and noise.
- Innovation and quality: WALTER emphasizes continuous development and improvement of its products to ensure maximum customer satisfaction. Their compressors are equipped with advanced technologies to optimise performance and save energy.
- Customer support and service: the company offers comprehensive service, including installation, maintenance and diagnostics, ensuring the long-term reliability and efficiency of their equipment.
